How To

Support Overview / How To

How To

1217 results
  • There is a small, oval dot on the inside of one of the ear cups. Is this used for anything?
    This is the charging indicator LED. I lights up red when the headphone is charging, and goes dark when charging is complete, or if no charging takes place.
  • There is an upgrade socket on the back panel. How is this socket used, and which kind of cable must I buy to use it?
    Although the owner's manual states that owner can use this connector for home upgrade procedure, this is not so. The USB-connector used cannot be bought in commercially available cables, and the port must be considered for technician's use only.
  • There is an upgrade socket on the back panel. How is this socket used, and which kind of cable must I buy to use it?
    Although the owner's manual states that owner can use this connector for home upgrade procedure, this is not so. The USB-connector used cannot be bought in commercially available cables, and the port must be considered for technician's use only.
  • The reason for the LEDs is orange
    If your LINK BAR has 4 orange LED lights in the front, this means you have "muted" the microphone which is located on the top of the speaker.
    To unmute the LINK BAR use the "switch" and the front LEDs will stop illuminating orange. Now you can use the hot-words to interact with the Google Assistant/Google Search (varies from country).

    Privacy information:
    We call our button the "PrivacySwitch" for the moments when you don't want the bar to listen for the hot words.
    Google has high privacy rules, and one of them is not to share end-user data with any third-party apps.
     
  • There are two small holes on top of my JBL LINK 10, 20, 300 or 500 speaker. What are these?
    These holes are the microphones for the JBL Link
  • There are two kinds of remote cables for the Synchros series. How do you tell them apart?
    The three JBL Synchros on-ear and over-ear headphones S300, S500 and S700 all have cables with remote control on them. There are two types of remote controls. One is for iPhones mainly. It has white dividing rings between the poles of the jack plugs. The other one is for Android phones. It has black dividing rings between the poles of the jack plugs. This is shown in the owner's manuals as a drawing. The S300 comes in two models, S300i and S300a. They are of course meant for iPhones and Android, respectively. You should either buy the i or the a version, to match the phone you have. But since the difference is only in the remote control on the cable, it is always possible to buy the alternative cable later, as long as they are in stock as spare parts. The S500 and S700 have BOTH cables in the box, so there is no i and a version of these models.
  • There are times when my smart phone stops charging when attached to the wireless charge arm on Smartbase.
    This can be caused by the charge arm reaching its thermal temperature cutoff. This is a safety feature to prevent a potential risk. For proper heat dissipation, always be sure to have the charging arm in the open position when your smart phone is attached.
  • The P and S speaker won't be associated successfully when pressing the association button twice on the primary speaker.
    Make sure to press the association button once. If by mistake you pressed it more than once, there is a good chance that association does not take place. Wait until the association process is completed, which takes about 2 minutes, and repeat the process.
  • The Noise Cancellation we are using in our JBL TOUR Series
    True Adaptive NC available on Tour One enables real-time monitoring of exterior surroundings and personal attributes like movement, hair, eyeglasses, and automatic adjustments to the NC performance and EQ.

    If you don’t prefer the canceling performance's automatic change, you can get a fine-tuned canceling level by choosing “Everyday Mode” in the app.

    Adaptive Noise Cancelling - available on Tour Pro+ TWS - listens to ambient environmental noises using external and internal mics then creates the inverse phase back to the listener creating the noise “canceling” effect.
    The headphones also allow the listener to adapt or adjust noise cancellation through features like Ambient Aware and TalkThru.
  • The JBL Micro Wireless is not completely mute when I turn the volume on a Bluetooth source unit to minimum.
    Even when reducing volume to minimum on the Bluetooth source unit, it does not reduce the audio signal to zero. In this case the Micro Wireless will playback music at a very low volume.
  • The headphone is sweatproof. Is it also waterproof?
    This is a sweatproof headphone, but if you regularly sweat profusely, or use it in rainy weather, damage may result.
  • The effect of the Awareness function seems small when listening to music. Is this correct?
    This may simply be a matter of how the headphone is used. The awareness effect is intended to give the user the ability to hear sounds around them through the microphones on the headset. The effect is apparent in use cases where there is no audio, or the audio is at a moderate level. As with any situation, if the sound level of music is loud, it will mask any sounds, including those delivered by our ambient aware technology
< 1 ... 23 24 25 26 27 ... 102 >

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a support agent
Call us now at: (800) 336-4525

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat With Us

Chat With Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

message

Text Us

Text with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)