JBL Tune 660NC
Wireless, on-ear, active noise-cancelling headphones.
Sold from 2021 until now
Getting started with your JBL Tune 660NC
Quick Start Guide & Downloads
Product Specifications
- Driver size (mm)
- 32
- Number of Microphones
- 2
- Driver sensitivity at 1kHz/1mW (dB)
- 100
- Dynamic frequency response range (Hz)
- 20Hz-20kHz
- Impedance (ohms)
- 32
- Audio Cable Length (ft)
- 0.7
- Audio Cable Length (m)
- 0.2
- Ear Cup Depth (cm)
- 1.7
- Ear Cup Depth (in)
- 0.7
- Ear Cup External Height (cm)
- 7.3
- Ear Cup External Height (in)
- 2.9
- Ear Cup External Width (cm)
- 7.3
- Ear Cup External Width (in)
- 2.9
- Ear Cup Internal Height (cm)
- 3.2
- Ear Cup Internal Height (in)
- 1.3
- Ear Cup Internal Width (cm)
- 3.2
- Ear Cup Internal Width (in)
- 1.3
- Charging Cable Length (m)
- 0.2
- Charging Cable Length (ft)
- 0.7
- Weight (g)
- 166
- Weight (oz)
- 5.9
- Bluetooth profiles
- A2DP v1.3, AVRCP v1.5, HFP v1.6
- Bluetooth frequency
- 2.402 GHz-2.480 GH
- Bluetooth version
- 5.0
- Charging time (hours from empty)
- 2
- Maximum music play time with ANC on (hours)
- 44
- Maximum play time (hours)
- 44
- Bluetooth
- Yes
- Foldable
- Yes
- Voice Assistant integration
- Yes
- Active Noise Cancelling
- Yes
- Built-in Microphone
- Yes
- Detachable Cable
- Yes
- Hands Free Call
- Yes
- JBL Pure Bass Sound
- Yes
- On-ear
- Yes
- Rechargable battery
- Yes
- Controls on Ear Cups?
- Yes
- Wireless
- Yes
Your music, noise free
With the Tune 660NC Noise Cancelling headphones, you'll get great sound, noise-free! Enjoy JBL Pure Bass Sound for up to 44 hours with ANC on and then recharge in a flash (just 5 minutes for 2 extra hours of battery). Out of juice? Just plug in the additional detachable cable keep the flow going. Immediately pair the JBL Tune 660NC to your Android device thanks to Fast Pair enabled by Google. Then, use the handy buttons on the ear cup to control sound and calls and leave your device in your pocket. Choose the color that best suits your mood. Super light and flat foldable, they'll fit anywhere and be ready to light up your day.
FAQs & How-Tos
-
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
-
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
If you are having trouble pairing your headphones or if your device is asking for a PIN, please make sure to check all available BT connections in your device's settings. Verify that you are connecting to the headphone's product name that excludes 'LE'. The 'LE' connection is only intended for voice assistant feature compatible with your headphones. If the voice assistant feature has not yet been configured, this would explain why the 'LE' connection appears as an available connection, but cannot be used for Bluetooth audio.
https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a support agent
Call us now at:
(800) 336-4525
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat With Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)