JBL Endurance PEAK
Waterproof True Wireless In-Ear Sport Headphones
Sold from 2018 until now
Getting started with your JBL Endurance PEAK
Quick Start Guide & Downloads
Product Specifications
- Driver size (mm)
- 10
- Driver sensitivity at 1kHz/1mW (dB)
- 95
- Dynamic frequency response range (Hz)
- 16 Hz – 22 kHz
- Number of drivers per ear
- 1
- Charging Case Weight (g)
- 92.1
- Charging Case Weight (oz)
- 3.2
- Earpiece Weight (g)
- 14.4
- Earpiece Weight (oz)
- 0.5
- Bluetooth profiles
- A2DP 1.3, AVRCP 1.5, HFP 1.6
- Bluetooth frequency
- 2.402 – 2.480GHz
- Bluetooth transmitted modulation
- GFSK, π/4DQPSK, 8DPSK
- Bluetooth transmitter power
- 0 - 10dbm
- Bluetooth version
- 4.2
- Charging case battery life (max hours)
- 24
- Charging time (hours from empty)
- 2
- Maximum play time (hours)
- 4
- Bluetooth
- Yes
- Charging cable
- Yes
- Touch Control
- Yes
- Built-in Microphone
- Yes
- Charging case
- Yes
- Hands Free Call
- Yes
- Powerhook
- Yes
- Rechargable battery
- Yes
- Secure Fit
- Yes
- Sweat Proof
- Yes
- True Wireless
- Yes
- Twistlock
- Yes
- Waterproof
- Yes
- Wireless
- Yes
- IP Code
- IPX7
Unleash your Potential.
Free yourself from all constraints and be ready to reach a new level of performance with the JBL Endurance PEAK headphones. Enjoy the freedom of a fully wireless workout without the need to recharge the headphones for up to 28 hours (4h + 24h backup power). But if you feel like you still have more to give, it only takes 10 minutes of recharging for up to another hour of motivating music. Thanks to the PowerHook™ technology, the JBL Endurance PEAK headphones conveniently power on and off as you start wearing them, so they’re ready to attack each and every workout whenever you are. In addition, the PowerHook™ lets you switch off your TWS buds without reaching for your charging case each time. With their IPX7 waterproof design, the JBL Endurance PEAK are also guaranteed never to hurt or fall out and feature a flexible around the ears hook for extra security. In addition, the JBL Endurance PEAK headphones work in both mono and stereo mode and allow you to seamlessly control your sound or calls directly on the earpiece using their convenient touch controls. And when your workout is over, simply put your headphones in the rugged storage case.
FAQs & How-Tos
-
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.
If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
Repeat until the contact points are visibly clean, and charging should work as designed.
Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all TWS earphones and cases.Was this helpful? Thank you for your feedback! -
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.Was this helpful? Thank you for your feedback!
-
The Endurance headphones do not support Apt X or AAC audio codecs.Was this helpful? Thank you for your feedback!
-
Fully charge the earbuds along with the charging case before the first use. The charging case is for charging the earbuds only. LED behaviors: 1 LED- 25% 2 LED-25%-50% 3 LED-50%-75% 4 LED-75%-99% NO LED-100% Fully Charged You can keep the earbuds in standby mode for up to 3 hours without having to return them to the case. beyond this point the earbuds must be returned to the case for charging. You should receive up to 4 hours of playback with additional 24 hours of backup power from the charging case.Was this helpful? Thank you for your feedback!
-
If connecting for the first time, the headphone will enter pairing mode automatically after it is powered on. To turn the headphones on, simply spread apart the RIGHT power hook from the cord. You will see solid red LED and then it will flash blue as it begins to search for a device to connect to. The Endurance headphone should pop up on your discoverable devices within a few seconds and you should be connected! If you wish to turn off the headphones, remove them from your ear and allow the RIGHT power hook and cord to close together. This is magnetized, so they should close together with ease.Was this helpful? Thank you for your feedback!
-
To answer call, press the "L" on the JBL logo on the RIGHT ear for 1 second. To hang up, press the "L" for 1 second. To ignore the call, press and hold the "L" for 2-3 seconds.Was this helpful? Thank you for your feedback!
-
To pair to a different device, double tap and hold your finger on the JBL logo for 5 seconds until you see the LED light flash blue. Make sure that the device you are trying to connect to is in range and in pairing mode. You should see the Endurance headphone pop up on your discoverable devices within a few seconds and the flashing LED light should now be a solid blue.Was this helpful? Thank you for your feedback!
-
To pause/play press the "L" on the JBL logo located on the RIGHT ear for 1 second. If you want to skip the track forward, press the "L" on the JBL logo on the RIGHT ear hook for 2 seconds. To skip tracks backward, press the "L" on the JBL logo on the RIGHT ear hook for 3-4 seconds.Was this helpful? Thank you for your feedback!
-
To control the volume, simply move your finger up the ridges above the JBL logo on the RIGHT ear to increase the volume. To decrease the volume, move your finger down along the ridges.Was this helpful? Thank you for your feedback!
-
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
(800) 336-4525
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat with Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)