JBL EVEREST™ 110
Wireless In-ear headphones
Sold from 2017 until now
Getting started with your JBL EVEREST™ 110
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowQuick Start Guide & Downloads
Product Specifications
- Driver size (mm)
- 5.8
- Driver sensitivity at 1kHz/1mW (dB)
- 96dB
- Dynamic frequency response range (Hz)
- 10Hz-22kHz
- Impedance (ohms)
- 32.0
- Number of drivers per ear
- 1.0
- Weight (oz)
- 0,56
- Bluetooth profiles
- HFP v1.7, HSP v1.2, A2DP v1.3, AVRCP v1.6
- Bluetooth frequency
- 2.402GHz-2.48GHz
- Bluetooth transmitted modulation
- GFSK,π/4DQPSK, 8DPSK
- Bluetooth transmitter power
- 0-4 dbm
- Bluetooth version
- 4.1
- Charging time (hours from empty)
- 2.0
- Maximum music play time with ANC off (hours)
- 8.0
- Maximum play time (hours)
- 8.0
- Maximum talk time (hours)
- 8.0
- 3-Button Remote/ Mic
- Yes
- Hands Free Call
- Yes
- JBL Legendary Pro Audio Sound
- Yes
- Rechargable battery
- Yes
- Speed charge
- No
- Wireless
- Yes
Wireless experience. Matchless comfort.
JBL Everest 110 in-ear wireless headphones come with Legendary JBL Pro Audio sound that delivers a dynamic acoustic performance, relentlessly for up to 8 hours on a single charge, with a 2-hour quick recharge. The ergonomic design understands every contour of your ear, and fits in snugly for unmatched comfort and hours of listening pleasure. Enjoy crystal clear, hands-free calls using the built in microphone with echo cancellation. Available in three ear-sleeve sizes and premium metallic finishes, the sleek headphones are great to look at and even better to listen to. Dare to listen.
FAQs & How-Tos
-
No. The Everest 110 are not sweat proof and do not have an IPX rating that protects the headphones from sweat and water. Over exposure to sweat and water can cause significant damage to the headphones.Was this helpful? Thank you for your feedback!
-
The Everest product uses standard Bluetooth protocol for audio communication. Gaming headphones usually use a different frequency and protocol for audio communication.Was this helpful? Thank you for your feedback!
-
Yes, the Everest 110 features volume control that is compatible with most smart devices. The volume control is located on the inline microphone.Was this helpful? Thank you for your feedback!
-
Switch the headphone ON, then press both volume buttons (VOL + and VOL-) at the same time, and hold them for 5-6 seconds. The headphones are now reset to factory default.Was this helpful? Thank you for your feedback!
-
Press and hold the center button located on the inline microphone. It helps to have one or both ear inserts in the ear to hear the audio voice prompts. Once you press and hold the power button, you will hear the audio voice stating, "powering on". If this is your first time pairing the device, it will automatically go into pairing mode and will be looking for the device. Make sure the device you are trying to connect to is in search mode. It should recognize the Everest 110 within 2-3 seconds. If you would like to connect to a different device. Make sure the unit is off and proceed to press and hold the center button on the inline mic from 4-6 seconds until you hear "powering on......JBL Everest is ready to pair. Go to the pairing menu on your device" You will now be able to pair to a different device. The device should recognize the Everest 110 within 2-3 seconds and will connect.Was this helpful? Thank you for your feedback!
-
To charge the Everest 110, slide the rubber window from the top down to expose the USB charging port that is located on the back of the inline microphone. Please use the JBL charging cable that was included in the packaging to charge these headphones.Was this helpful? Thank you for your feedback!
-
The Everest 110 should receive 8 hours of audio playback on a full charge. However, depending on the volume level at which you listen to your music at, this can decrease the battery life faster.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a support agent
Call us now at:
(800) 336-4525
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat With Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Text Us
Text with a support agent via SMS at:
628-333-7807
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)