E25BT
JBL E25BT in-ear wireless headphones deliver the signature sound of JBL with up to 8 hours of battery life and a convenient neck clip to keep them in place comfortably even over extended periods of use. You can also seamlessly switch from music on your portable device to a call from your phone, so that you never miss a call. Add to this the convenience of a three-button remote and microphone and the various colors they come in, and you’ll have a hard time taking them off.
Product Specifications
General Specifications
| Ear tip material | Silicon |
|---|---|
| Driver size (mm) | 8.0 |
Audio Specifications
| Driver sensitivity at 1kHz/1mW (dB) | 102dB |
|---|---|
| Dynamic frequency response range (Hz) | 20 Hz - 20 kHz |
| Impedance (ohms) | 16.0 |
| Number of drivers per ear | 1.0 |
Dimension Specifications
| Headphone cable length (cm) | 55.5 |
|---|---|
| Headphone cable length (ft) | 1.8 |
| Weight (g) | 16.5 |
| Weight (oz) | 0.58 |
Control Connect Specifications
| Bluetooth version | 4.1 |
|---|---|
| Bluetooth profiles | HFP v1.6, HSP v1.1, A2DP v1.2, AVRCP v1.5 |
| Bluetooth frequency | 2.402GHz-2.48GHz |
| Bluetooth transmitted modulation | GFSK, π/4DQPSK, 8DPSK |
| Bluetooth transmitter power | 0-4 dbm |
Documents & Downloads
Spec Sheets
Quick Start Guide
Gallery
Videos
What’s in the Box
- 1 x Pair of JBL E25BT Headphones
- 1 x Charging Cable
- 1 x Quick start guide
- 1 x Warning Card
- 1 x Warranty Card
- 1 x Safety Sheet
- 1 x Carrying Pouch
FAQs & How-Tos
Can I take phone calls with the E25BT headphone?
Yes, the E25BT features a three button microphone which enables you to pause/play, skip tracks and answer and hang up phone calls.
Was this helpful?
Thank you for your feedback!
Can I listen to music while I am charging my E25BT headphones?
Unfortunately, you cannot turn on and use the headphones while they are charging.
Was this helpful?
Thank you for your feedback!
How do you power on and pair the E25BT Headphones?
Make sure that the device you want to connect to is on and in pairing mode. Press and hold the center button on the inline microphone for 3-5 seconds. (We recommend putting one ear tip inside your ear to hear the audio prompt) You should here "powering on.....pairing" as it searches for your device. The E25BT headphone should appear on your discoverable devices and should connect within 2-3 seconds. If you wish to pair to a different device, make sure the last device it was connected to has the bluetooth turned off. Make sure the headphones are off and press and hold the center button between 3-5 seconds or until the audio prompt states that it is "looking for device" You should be able to pair with a different device within 2-3 seconds.
Was this helpful?
Thank you for your feedback!
Is it possible to turn off the blinking blue LED light from my headphones?
No. There is no way to turn off the blue LED light from our wireless headphones unless they are turned off.
Was this helpful?
Thank you for your feedback!
How can I reset my JBL E25BT?
You can reset the E25BT in two ways:
1: Press and hold Volume + and Volume - simultaneously for more than 3 seconds. This resets to factory settings, clearing the pairing list.
2: With unit in ON mode, plug in the USB cable. This resets the unit and puts it into charging mode.
Was this helpful?
Thank you for your feedback!
Are these headphones sweat proof?
Unfortunately if these headphones are overexposed to sweat or water, it may compromise the controls or sound quality.
Was this helpful?
Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
Talk to a support agent
Call us now at:
(800) 336-4525
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat With Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Ask a Product Expert
Get help with questions about product features, set-up and troubleshooting.
IMPORTANT: Product Experts cannot help with warranty, refund or order-related issues.
Always Available.
(United States/Canada only)