E25BT
Wireless in-ear headphones
Getting started with your E25BT
Quick Start Guide & Downloads
Product Specifications
- Ear tip material
- Silicon
- Driver size (mm)
- 8.0
- Driver sensitivity at 1kHz/1mW (dB)
- 102dB
- Dynamic frequency response range (Hz)
- 20 Hz - 20 kHz
- Impedance (ohms)
- 16.0
- Number of drivers per ear
- 1.0
- Headphone cable length (cm)
- 55.5
- Headphone cable length (ft)
- 1.8
- Weight (g)
- 16.5
- Weight (oz)
- 0.58
- Bluetooth profiles
- HFP v1.6, HSP v1.1, A2DP v1.2, AVRCP v1.5
- Bluetooth frequency
- 2.402GHz-2.48GHz
- Bluetooth transmitted modulation
- GFSK, π/4DQPSK, 8DPSK
- Bluetooth transmitter power
- 0-4 dbm
- Bluetooth version
- 4.1
- Charging time (hours from empty)
- 2.0
- Maximum music play time with ANC off (hours)
- 8.0
- Maximum play time (hours)
- 8.0
- Maximum talk time (hours)
- 8.0
- 3-Button Remote/ Mic
- Yes
- Carrying pouch
- Yes
- Hands Free Call
- Yes
- JBL Signature Sound
- Yes
- Multi-Point Connection
- Yes
- Rechargable battery
- Yes
- Speed charge
- No
- Wireless
- Yes
Go the distance with awesome sound, wirelessly.
JBL E25BT in-ear wireless headphones deliver the signature sound of JBL with up to 8 hours of battery life and a convenient neck clip to keep them in place comfortably even over extended periods of use. You can also seamlessly switch from music on your portable device to a call from your phone, so that you never miss a call. Add to this the convenience of a three-button remote and microphone and the various colors they come in, and you’ll have a hard time taking them off.
FAQs & How-Tos
-
Unfortunately if these headphones are overexposed to sweat or water, it may compromise the controls or sound quality.Was this helpful? Thank you for your feedback!
-
Unfortunately, you cannot turn on and use the headphones while they are charging.Was this helpful? Thank you for your feedback!
-
Yes, the E25BT features a three button microphone which enables you to pause/play, skip tracks and answer and hang up phone calls.Was this helpful? Thank you for your feedback!
-
You can reset the E25BT in two ways: 1: Press and hold Volume + and Volume - simultaneously for more than 3 seconds. This resets to factory settings, clearing the pairing list. 2: With unit in ON mode, plug in the USB cable. This resets the unit and puts it into charging mode.Was this helpful? Thank you for your feedback!
-
Make sure that the device you want to connect to is on and in pairing mode. Press and hold the center button on the inline microphone for 3-5 seconds. (We recommend putting one ear tip inside your ear to hear the audio prompt) You should here "powering on.....pairing" as it searches for your device. The E25BT headphone should appear on your discoverable devices and should connect within 2-3 seconds. If you wish to pair to a different device, make sure the last device it was connected to has the bluetooth turned off. Make sure the headphones are off and press and hold the center button between 3-5 seconds or until the audio prompt states that it is "looking for device" You should be able to pair with a different device within 2-3 seconds.Was this helpful? Thank you for your feedback!
-
No. There is no way to turn off the blue LED light from our wireless headphones unless they are turned off.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a support agent
Call us now at:
(800) 336-4525
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat With Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)