JBL Tune 225TWS

JBL Tune 225TWS

True wireless earbuds

Getting started with your JBL Tune 225TWS

Getting started with your JBL Tune 225TWS

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Driver size (mm)
12
Driver sensitivity at 1kHz/1mW (dB)
105
Dynamic frequency response range (Hz)
20 Hz – 20 kHz
Impedance (ohms)
32
Number of drivers per ear
1
Charging Case Weight (oz)
1.7
Earpiece Weight (oz)
0.4
Charging Case Weight (g)
49.7
Earpiece Weight (g)
9.8
Bluetooth version
5.0
Bluetooth profiles
A2DP 1.3, AVRCP 1.5, HFP 1.7
Bluetooth frequency
2.402 GHz – 2.48 GHz
Bluetooth transmitted modulation
GFSK, π/4DQPSK, 8DPSK
Bluetooth transmitter power
0 - 12dbm
Charging case battery life (max hours)
20
Charging Time (Hours)
test
Charging time (hours from empty)
2
Maximum play time (hours)
5
Remote control on ear cups?
Yes
Charging cable
Yes
Voice Assistant integration
Yes
Built-in Microphone
Yes
Hands Free Call
Yes
JBL Pure Bass Sound
Yes
True Wireless
Yes
Wireless
Yes
Charging case
Yes
Rechargable battery
Yes
Bluetooth
Yes

Stay Connected, Stay Wireless.

Feel at one with your music and your world. With no wires holding you back enjoy your favorite music with JBL Pure Bass. The JBL TUNE 225TWS earbuds seamlessly connect you to your music and calls.  Just open the case and start listening, as the JBL TUNE 225TWS earbuds immediately pair with your device, while Dual Connect lets you use either earbud, or both. Listen longer and in comfort, with up to 25 hours of battery life. Find the JBL TUNE 225TWS earbuds that fit your style, with different color options.

JBL has been powering festivals and concerts around the world for decades. Now let JBL bring your own world to life with incredible Pure Bass sound.
Tangled in your bag, caught in your jacket or stuck in your hair, wires can get in your way. Experience total freedom with no cords with the True Wireless JBL TUNE 225TWS earbuds.
With up to 25 hours of battery life, you can listen all day and all night. Keep your own private concert going for as long as you can keep up.
Left ear, right ear, both ears? The power of Dual Connect gives you the choice to seamlessly enjoy music or make calls with either one or bothbuds. And the battery life keeps up with you, as you can keep one earbud charging, while using the other one.
Thanks to Fast Pair enabled by Google, your Tune 225TWS are connected to your Android device the second you take them out of the case. You can also pair different devices just by tapping on the devices’ screen.
What works for you? With 6 different colors, you'll be able to find the perfect pair of earbuds to match exactly who you are.
No detail left to chance. The charging case for the JBL TUNE 225TWS is as thoughtfully designed as the earbuds it holds, with a shape inspired by a river stone, a soft body, and a curved lid that pops up to give you fast access to your buds.

FAQs & How-Tos

11 results
  • It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all TWS earphones and cases.
  • As with all in-ear headphones, our range of TWS headphones can be susceptible to a build up of dust and earwax. This can cause low volume on one or both earbuds, or balance issues (e.g. right earbud is louder than the left earbud). To reduce the likelihood of these issues occurring, it is a good idea to periodically clean your earbuds and your ears. Clean the earbuds by removing dust and wax after each use, using a pointed toothpick to remove larger amounts and a small amount of rubbing alcohol applied to a cotton swab for final degreasing.

    If you are experiencing volume or balance issues, always check for wax and dirt in and around the earbud and driver and complete cleaning of the earbuds as described above. If the issue persists, there may be earwax/dirt stuck in the small holes in the grille in front of the driver, preventing sound output. To resolve the issue try dipping the affected earbud tip into a solution of lukewarm tap water and a small amount of dish soap (washing up liquid). The earbud tip should only be put into the liquid up to a maximum depth of 1-2 mm only (see images below). Immersing the earbuds in water or putting the earbuds in water at a larger depth than this could void your warranty. Keep the earbud tip in the water for about 2-3 minutes, then wipe/clean the grille with a small brush (such as a toothbrush). The should remove the wax and resolve the volume/balance issues.

    cleaning-earstick-tip 
  • This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.

  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • Place both ear pods in the charging box, while the charging box is plugged into a power source. Press and hold the button on the Right pod for about 5 seconds. The LED on the pod will turn off and then turn back on again. This restores to factory defaults. (Please note that charging must take place for reset to work.) It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • 1. Put the earbuds back into the charging case and close the lid. 2. Press and hold the buttons on both the left and right earbuds for more than 2 seconds. Alternatively, only press and hold one of the buttons to just turn off the left or right earbud as required. 3. Use the Auto-off function via the JBL Headphone app (Only applicable for headphones supported in our JBL Headphone app).
  • This headphone does not feature volume control. You must manually control volume from your device.
  • 1. First, try to restart the Bluetooth connection on your source device (Smartphone/tablet/PC) by switching Bluetooth off and on again with a short pause in between.

    2. "Forget" (remove) the previously paired connection (on your smartphone/tablet/PC) in your Bluetooth settings if you had once paired with your product.

    3. Try to restart the source device (Smartphone/tablet/PC) by powering it off and on again and after restarting, try to establish a Bluetooth connection to your product.

    4. If the above does not work, then try to restart your product (Portable speaker, Headphone) by turning it off and on again.

    5. Press and hold down the Bluetooth button on your device (Portable speaker, Headphones) to initiate pairing mode again.

    6. Go into the Bluetooth settings on your Smartphone/tablet or PC to start the pairing process.

    You should now have a successful pairing with your device. If you are still experiencing issues, please contact us again.
  • The two earpieces of your TWS headphones should normally be connected together without issue.  However, if they are no longer paired to each other, please follow these steps, in order.
    1. Forget/unpair the headphones on your device.
    2. Manually pair the two earpieces together following the "Manual Pairing Left & Right" instructions in your Owner's Manual/Quick Start Guide.
    3. Pair the headphones to your device and see if this resolves the problem.
    4. If manual pairing does not fix the problem, forget/unpair the headphones on your device again.
    5. Initiate a Product Reset to reset the earbud’s Bluetooth connection.
      • Note that RESET will wipe all previous settings and pairings, so it will be necessary to pair your headphones with your devices again
      • Follow the Product Reset instructions in your Owner's Manual/Quick Start Guide.
      • Manually pair the 2 buds together again, as you did in step 2.  This additional step is necessary because, by default, the reset procedure does not automatically pair the two ear pieces together, but it does wipe all previous settings and resets the internal processor, so it is necessary to manually pair the two ear pieces together again.
      • Pair the buds to your Source Device.
< 1 2 >

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a support agent
Call us now at: (800) 336-4525

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat With Us

Chat With Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)