Support Overview / JBL SW10

JBL SW10

10” Powered Wireless Subwoofer for JBL LINK BAR

Getting started with your JBL SW10

Quick Start Guide & Downloads

Other

Product Specifications

General Specifications

Maximum Power: 300W

Standby Power Consumption: <0.5W

Woofer Size: 1 x 10" (250mm)

Frequency Response: 35-120Hz

Operating Temperature: 0°C - 45°C

5.8G Wireless transmitter modulation: GFSK

5.8G Wireless Frequency Range: 5740MHz-5840MHz

5.8G Max Transmitting Power: 8dBm

Dimensions

Dimensions (W x H x D): 12” x 16” x 12” (305mm x 440mm x 305mm)

Weight: 27.2lbs (12.3kg)

Packaging Dimensions (W x H x D): 14” x 20” x 14” (360mm x 503mm x 360mm)

Packaging Weight (Gross): 29.8lbs (13.5kg)

High Impact Without Wires

The JBL SW10 powered wireless subwoofer adds impactful, deep bass to the JBL LINK BAR to create the ultimate immersive audio experience. Featuring a 10” woofer, tuned bass reflex enclosure and onboard 300-watt amplifier, the JBL SW10 delivers rich and thrilling bass without the hassle of wires. In order to provide flexible placement options, JBL has incorporated a downward firing design architecture making room location far less critical. The SW10 is the perfect add-on when you are looking for real JBL pro bass.

10” (250mm) woofer

The 10” woofer has been engineered to work in tandem with the tuned bass reflex enclosure to deliver thundering bass.

Wireless audio connection

Convenience of flexible placement without the hassle of wires.

Bass reflex port design

Using this tuned design allows for greater output and deeper bass.

Easy setup

One button setup for easy connection to the JBL LINK BAR.

FAQs & How-Tos

1 results

Sort

Page size

Why is my soundbar having interference issues with my mesh network?
If you have a mesh network (more commonly seen in Eero Mesh networks), it is possible that you may experience your satellite speakers or subwoofer intermittently disconnecting from the soundbar. This is similar to normal interference that occurs with products on a similar wireless frequency. The special thing about Eero mesh networks is that they do not allow you to move a device to the 5Ghz or 2.4Ghz band. The system will automatically decide which devices should be on which band and will move them accordingly (switching whenever needed). Some of our soundbars run on a 5Ghz frequency which is where the interference can occur. Since we cannot change the signal in which they operate and we cannot change the band they are connected to via their Eero mesh network, there are a few things you can do to try and stop this from occurring.
1. Move the mesh nodes far away from the soundbar
2. Use the 2.4Ghz band instead of the 5Ghz band (if your mesh system allows this)
3. Ensure to enable/utilize the MU-MIMO setting (not applicable to all mesh systems). Please refer to your router's website to see if MU-MIMO is being utilized by default.
What is MU-MIMO?

MU-MIMO stands for Multi-User, Multi-Input, Multi-Output. This allows for the router to send a signal to multiple devices at one time vs. the previous version in which the router would be able to connect to multiple devices, but only send the signal to one device at a time.

NOTE: You may notice that when the soundbar is turned on, there may be a dip in the immediate internet speed, but it will go back to normal within less than a minute.
Was this helpful? Thank you for your feedback!