JBL Link Bar

JBL Link Bar

Voice-Activated Soundbar with Android TV and the Google Assistant built-in

Getting started with your JBL Link Bar

Getting started with your JBL Link Bar

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Transducer
2 x 20mm (0.8”) tweeter, 4 x (44x80)mm (1.7"x3.2”) racetrack driver
Total Maximum Power
100W
Frequency response
75Hz–20kHz
Signal-to-noise ratio
>85dBA
Power Supply
100-240V~50/60Hz
Bluetooth version
4.2
Bluetooth transmitter frequency range
2402–2480MHz
Wireless network
802.11a/b/g/n/ac (2.4GHz/5GHz)
Multi 4k video HDMI input
Chromecast built-in
Dimensions (W x H x D)
1020 x 60 x 93mm
Gross Weight
4.4kg
Net Weight
2.5kg
Note
LINK BAR is intended to be used for streaming music. A consumer can stream Bluetooth audio to the speaker. A consumer can connect their speaker to the local Wi-Fi Network and stream music with Google Chromecast. In addition, the speaker will work with Google Home. This product is designed to be instantly on and ready to play music at a moment's notice, therefore, the Bluetooth and Wi-Fi connection must remain active at all times to ensure proper operation.
LINK BAR is in compliance with the European Union energy legislation. LINK BAR complies with European Commission Regulation (EC) No 1275/2008 (HiNA and (EU) No 801/2013 as a networked equipment with high network availability equipment and equipment with HiNA functionality).
Power consumption:
Off Mode
N/A
Standby
N/A
Network Standby
N/A
Time to standby
N/A
Active Standby*
5.5W
*Active Standby
LINK BAR is connected to a wireless network but does not provide active audio functions. when LINK BAR is plugged into a wall socket, regardless whether it is muted or not, words "Hey Google" or "Ok Google" it is automatically on active standby mode. It will respond to you if you say the trigger.

The smartest JBL soundbar yet with Android TV and the Google Assistant

JBL Link Bar is a voice-activated soundbar with Android TV and Google Assistant built-in. It turns any TV into a smarter TV, with legendary JBL sound performance. Just start with “Hey Google” to quickly find the latest blockbuster movie, check the score of the big game, or control your smart home — all with just your voice and without leaving what you're watching. 4K UHD support you will experience exceptional sound quality with vivid image quality. Simple to install, it connects to your TV with a single cable, creating an effortless setup. The Link Bar leverages JBL’s audio expertise in a smartly crafted audio system that is precisely tuned to deliver an impactful and exciting audio performance with crystal clear highs, silky smooth mid-band and tight bass from a one-piece soundbar.

Brings the best of JBL’s legendary sound to your smart TV with rich bass performance.
Android TV delivers a smarter viewing experience, find and watch programs more easily than ever.
Search with your voice. Just say “Hey Google” to quickly find the latest blockbuster, check the score of the big game or dim the lights in a ‘hands-free’ experience.
Enables to mute your soundbar microphones for extra privacy and security protection when not using the Google Assistant.
With 3 HDMI inputs and 1 HDMI ARC output, the LINK BAR becomes a 4K entertainment hub for video or gaming devices, with just one cable connection to your TV.
Let you instantly stream your favorite music, radio, or podcasts from your mobile device to your speakers.
Wirelessly stream high-quality sound from your smartphone or tablet.

FAQs & How-Tos

27 results
  • JBL Playlist: Yes, it can be used with Bluetooth out of the box, and also Chromecast (setup is done via Google Home, but speaker does not have Google Assistant built-in) JBL Link Bar: Yes, it can be used with Bluetooth and Chromecast after setting the bar up with a Google account - choosing not to activate the Google Assistant. JBL Link Music: No, this speaker requires setup via Google Home JBL Link Portable: No, this speaker requires setup via Google Home JBL Link 10, 20 and Link View: No, these speakers requires setup via Google Home Harman Kardon Citation series: No, this speaker requires setup via Google Home Harman Kardon Allure: Yes, Bluetooth is available from factory settings. Every time it is powered on and off, the speaker will say "Now in setup mode, follow the instructions in the Harman Kardon Alexa App." Harman Kardon Allure Portable: Yes, Bluetooth will be available after initial setup in the Harman Kardon Alexa App. This means that you have to log in with your Amazon account at first, and if you do not want to use the Alexa assistant, log out of you Amazon account afterwards. Harman Kardon Astra: Yes, Bluetooth will be available after initial setup in the Harman Kardon Alexa App. This means that you have to log in with your Amazon account at first, and if you do not want to use the Alexa assistant, log out of you Amazon account afterwards.
  • As of December 1, 2022, Google Assistant on third party smart displays, soundbars, and speakers are no longer able to make a voice call to a landline or mobile number on the carrier network. Voice-over-IP calls continue to work. This is due to the ongoing infrastructure improvements.

     

    Please click here to see Google’s official statement/article explaining this.

  • To get the full potential of the HDMI content/source you have in your home, then you need to enable HDMI UHD deep color option on your TV for the HDMI output port (ARC).

    Since there are tons of different TVs and manufactures out there, the best way to see if your TV can use 10-bit color on HDMI, is to read the TV's manual or call their support section.
  • Let's say you have 4 LINK devices in your home and you start your day with "OK Google, How is the weather?".
    All of your devices will "light up" and start listening to the command. However, only one of the speakers will give you the information (if they are under the same account).
    The speaker with the best microphone reception will respond with an answer.

    Please note: if you have muted all speakers or 3 out of 4 are muted, then only one will respond and the rest will not react.
    If all speakers are muted, all will be silent.
  • Sometimes you need to change settings such as changing EQ to match the content you are watching or adjusting the bass level.
    1. Grab your Remote control.
    2. Press and hold the "HOME" button down, an overlay on the right side of the screen will appear.
    3. This is our quick settings menu.
    4. Go to Settings --> Sound --> Select EQ Mode
    5. Hit the back button Arrow icon a couple of times until you are back at what you are watching.
    With the Quick settings menu, you don't have to stop and leave the app or content you are watching, its very simple, and easy to use!
  • Playing local playlist that you created via Spotify works differently for Android TV system, which the LINK BAR has built-in!

    Here is how to do it:
    1. Go to the Google Play Store on your TV screen (Use remote to navigate).
    2. Download the Spotify app
    3. Sign-in with your account.
    4. You can use the dedicated app and navigate through your playlist.
    5. Alternatively, you can now use voice commands such as "Ok Google, Play my Playlist Sunday Funday On Spotify"
    Now you can enjoy Spotify using voice or the Remote Control.

    *Some commands may not be available in all countries.
  • We included a Remote Control in your box (I know, that's sweet of us), and you need to pair it with your LINK BAR before it is working.

    This is how you will do it
    1. Press the BLUETOOTH button on the LINK BAR
    2. Now hold the BLUETOOTH button down for 3-5 seconds.
    3. When you see "SEARCHING FOR ACCESSORIES" on your TV screen, release the BLUETOOTH button.
    4. On your REMOTE press the HOME and BACK buttons at the same time.
    5. A Green LED light will flash on the REMOTE to indicate that it is in pairing mode.
    6. Keep holding down the buttons until you see a message on the TV screen that says, "Pairing remote control to LINK BAR" After 10 seconds, release.
    7. If done successfully on your TV screen, you will see an indicator counting down that it will "pair" with your remote.
    Enjoy your entertainment with few clicks away!

    BONUS TIP:  There is an Android app called Android TV that will turn your Smartphone into a Remote controller.
  • If you want to add more depth and bass to your LINK BAR, we have a dedicated subwoofer (not included with the LINK BAR) that you can purchase!

    Pairing the Subwoofer is very simple:
    1. Turn on the soundbar and the subwoofer. If the connection is lost, the LED indicator on the subwoofer blinks slowly.
    2. Press the “Subwoofer Pairing” button on the SW10 subwoofer to enter pairing mode. The LED indicator on the subwoofer blinks quickly.
    3. Press the “Subwoofer Pairing” button on LINK BAR, the LED indicator on the LINK BAR blinks rapidly
    4. If successful, the pairing LED indicator on both subwoofer and LINK BAR will be a steady white LED light. If pairing fails, the sign on the subwoofer blinks slowly.
    5. If the pairing fails, repeat the steps above. If you are still experiencing problems, please try to switch off all wireless devices in the home (such as routers, TV sets with wireless function, telephones, computers, etc.), then try again. It may be overcrowding on the 5GHz frequency, which often causes problems. By eliminating all other wireless activity, this will help space for the LINK BAR to establish its connection. You now should be able to pair without problems. Once pairing is complete, you can switch your devices on again
  • You will see a notification in the recommendation option on your TV screen when there is an upgrade is available.

    The system will download the firmware and apply the update after your confirmation.

    You can also manually check for updates. Go to the settings menu and select “About” followed by “System Update.”
  • Playing music over Bluetooth connection is very simple to do:
    1. Short press the dedicated Bluetooth button on the LINK BAR.
    2. Go to settings on your phone.
    3. Find Bluetooth and enable it.
    4. Select the JBL LINK BAR in your device list.
    5. You are now paired and ready to jam your favorite music!
< 1 2 3 >

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call Us now at: (800) 336-4525

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat with Us

Chat with Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

message

Text Us

Text with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 8:00 pm (ET)