


JBL Link Music
Product Specifications
General Specifications
Transducer | 1 x 64mm |
---|---|
Output power | 1 x 20W |
Frequency response | 60Hz-20kHz |
Signal-to-noise ratio | >80dB |
Supported audio formats | HE-AAC, LC-AAC, MP3, Vorbis, WAV (LPCM), FLAC, Opus |
Dimensions (Dia x H) | 112 x 134 mm |
Weight | 730g |
Control Connect Specifications
Bluetooth version | 4.2 |
---|---|
Bluetooth transmitter frequency range | 2402 − 2480MHz |
Bluetooth transmitter power | <5dBm |
Bluetooth transmitter modulation | GFSK, π/4 DQPSK, 8DPSK |
5G Wi-Fi transmitter frequency range | 5.150~5.350GHz, 5.470~5.725GHz, 5.725~5.825GHz |
5G Wi-Fi transmitter power | <20dBm (EIRP) |
5G Wi-Fi modulation | OFDM, BPSK, QPSK, 16QAM, 64QAM, 256QAM |
5G Wi-Fi network compatibility | IEEE 802.11 n/ac |
2.4G Wi-Fi transmitter frequency range | 2412 – 2472MHz (2.4GHz ISM Band, USA 11 Channels, Europe and others 13 Channels) |
2.4G Wi-Fi transmitter power | <20dBm (EIRP) |
2.4G Wi-Fi modulation | OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM |
2.4G Wi-Fi network compatibility | IEEE 802.11b/g/n |
Wireless network | 802.11a/b/g/n/ac (2.4/5GHz) |
Documents & Downloads
Spec Sheets
Quick Start Guide
Gallery





Videos
What’s in the Box
- 1 x Link Music
- 1 x Power cable
- 1 x Quick-Start Guide
- 1 x Safety sheet
- 1 x Warranty cards

FAQs & How-Tos
-
I am trying to use Bluetooth, but it is not working after the setup.
To use Bluetooth, you must continue the setup in the Google Home app first.
The Bluetooth feature requires a Google account sign-in before it is enabled.Was this helpful? Thank you for your feedback!
-
Can the speaker be used with Bluetooth without setting up Voice Assistant?
JBL Playlist: Yes, it can be used with Bluetooth out of the box, and also Chromecast (setup is done via Google Home, but speaker does not have Google Assistant built-in) JBL Link Bar: Yes, it can be used with Bluetooth and Chromecast after setting the bar up with a Google account - choosing not to activate the Google Assistant. JBL Link Music: No, this speaker requires setup via Google Home JBL Link Portable: No, this speaker requires setup via Google Home JBL Link 10, 20 and Link View: No, these speakers requires setup via Google Home Harman Kardon Citation series: No, this speaker requires setup via Google Home Harman Kardon Allure: Yes, Bluetooth is available from factory settings. Every time it is powered on and off, the speaker will say "Now in setup mode, follow the instructions in the Harman Kardon Alexa App." Harman Kardon Allure Portable: Yes, Bluetooth will be available after initial setup in the Harman Kardon Alexa App. This means that you have to log in with your Amazon account at first, and if you do not want to use the Alexa assistant, log out of you Amazon account afterwards. Harman Kardon Astra: Yes, Bluetooth will be available after initial setup in the Harman Kardon Alexa App. This means that you have to log in with your Amazon account at first, and if you do not want to use the Alexa assistant, log out of you Amazon account afterwards.
Was this helpful? Thank you for your feedback!
-
When using the Device Utility app to set up my speaker, my Wi-Fi network is not appearing in the list. How can I connect to my Wi-Fi network?
If the network does not appear, you can manually type in the network name (SSID) and password to connect.
Was this helpful? Thank you for your feedback!
-
How to stream music with your Apple device
Our new JBL Link Music and Link Portable both support Apple AirPlay 2. Pick up your Apple device, use your favorite music streaming service, and connect to the JBL speaker! Please note: before using Apple AirPlay 2, you will need to install it on your WiFi network, either using the Google Home app or Apple Home app ( your choice! ).
Was this helpful? Thank you for your feedback!
-
I have connected my speaker using the Device Utility app, but the Google Home app cannot find the speaker. What should I do?
Close and restart the Google Home app, or restart your phone. Start the Google Home app again, and the speaker should now appear.
Was this helpful? Thank you for your feedback!
-
When trying to set up my speaker with the Google Home app, I get a message that says “Device needs to be activated before setup”. How do I proceed?
If you see this message, you must download the Device Utility app from the Google Play Store. Follow the instructions in the app to activate your speaker, and then return to the Google Home app to complete the setup.
Was this helpful? Thank you for your feedback!