JBL Bar 2.1 Deep Bass - Black - 2.1 channel soundbar with wireless subwoofer - Hero JBL Bar 2.1 Deep Bass - Black - 2.1 channel soundbar with wireless subwoofer - Front JBL Bar 2.1 Deep Bass - Black - 2.1 channel soundbar with wireless subwoofer - Back
JBL Bar 2.1 Deep Bass - Black - 2.1 channel soundbar with wireless subwoofer - Hero

JBL Bar 2.1 Deep Bass

The elegant JBL BAR 2.1 Deep Bass Soundbar features Bluetooth, Optical, HDMI in and ARC connectivity with both Dolby Digital and JBL Surround Sound modes. Its room filling 300 Watts of total system power delivers an immersive experience by way of its four powerful full range drivers, two 1” tweeters, and JBL engineered 6.5” subwoofer. On-board Bluetooth allows you to use the Bar 2.1 for streaming music from your favorite device in addition to its ability to deliver a real JBL theater experience when coupled with your flat panel TV. Its elegant and low profile design will look amazing below your TV.

Product Specifications

General Specifications

Model Bar 2.1 Deep Bass CNTR (Soundbar Unit), Bar 2.1 Deep Bass SUB (Subwoofer Unit)
Power supply 100 - 240V AC, ~ 50/60Hz
Total speaker power output (Max. @THD 1%) 300W
Output power (Max. @THD 1%):
2 x 50W (Soundbar); 200W (Subwoofer)
Transducer 4 x race track drivers + 2 x 1” tweeter (Soundbar); 6.5” (Subwoofer)
Soundbar and Subwoofer standby power <0.5W
Operating temperature 0°C - 45°C
HDMI Video output (With Audio return channel) 1
HDMI version 1.4

Audio Specifications

HDMI Video input 1
Frequency response 40Hz - 20KHz
Audio inputs 1 Optical, Bluetooth, USB (USB playback is available in US version. For other versions, USB is for Service only.)

Dimension Specifications

Dimensions (W x H x D):
965 x 58 x 85 (mm) / 38” x 2.28” x 3.35” (Soundbar);
240 x 240 x 379 (mm) / 8.9” x 8.9” x 14.6” (Subwoofer)
Weight 2.16 kg (Soundbar);
5.67 kg (Subwoofer)
Packaging dimensions (W x H x D) 1045 x 310 x 405mm
Packaging weight (Gross weight) 10.4kg

Control Connect Specifications

USB port Type A
USB rating 5V DC/ 0.5A
Supporting file format mp3, wav
MP3 Codec MPEG 1 Layer 2/3, MPEG 2 Layer 3, MPEG 2.5 Layer 3
MP3 sampling rate 16KHz - 48 KHz
MP3 bitrate 80kbps - 320kbps
WAV sample rate 16KHz - 48 KHz
WAV bitrate Up to 3000kbps
Bluetooth version 4.2
Bluetooth profile A2DP V1.3, AVRCP V1.5
Bluetooth frequency range 2402MHz-2480MHz
Bluetooth Max. transmitting power <10dBm  (EIRP)
Modulation Type GFSK, π/4 DQPSK, 8DPSK
5G Wireless frequency range 5736.35 - 5820.35MHz
5G Max. transmitting power <9dBm (EIRP)
Modulation Type π/4 DQPSK
Please consult the documents for in-depth specs

Documents & Downloads

Videos

What’s in the Box

  • Soundbar
  • Wireless subwoofer
  • Remote control with batteries
  • Power cords (up to 8pcs depending on region SKUs)
  • HDMI cable
  • Wall-mount bracket kit with screws
  • Quick start guide
  • Warranty card
  • Safety sheet
JBL Bar 2.1 Deep Bass - What's in the Box

FAQs & How-Tos

What are the differences between BAR 2.1 and BAR 2.1 Deep-Bass
In case you wonder what the differences are between JBL BAR 2.1 and JBL BAR 2.1 Deep Bass, the newest model, then keep reading to find out more!
Our JBL BAR 2.1 Deep Bass is an improvement to the BAR 2.1.

Here is what you will get extra:
  1. Improved sound quality.
  2. Deeper and richer bass.
  3. A new modern design change.
It may not be compelling enough for you to buy it or upgrade your device. However, if you are upgrading, then adding the JBL BAR 2.1 Deep Bass won't disappoint you at all!
How to restore factory default settings
To reset your JBL Bar 2.0 or 2.1 back to factory default settings, follow the steps below.
  1. Turn on your JBL Bar 2.0 or 2.1
  2. Press SOURCE and POWER buttons on top of the bar at the same time for more than 3 seconds.
  3. Your soundbar will now power off and on again.
All Bluetooth paired devices are now removed from the internal memory; please Bluetooth pair your devices again.

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: +(662) 2560020

Mon - Fri - 9:00 a.m 6:00 p.m