JBL PartyBox Encore 2
Portable party speaker with powerful sound, a dynamic lightshow, wireless digital mic, up to 15 hours playtime, replaceable battery and a flexible grab-and-go handle.
Documents & Downloads
Product Specifications
- Transducers
- 1 x 5.25 inch (135mm) woofers, 2 x 1 inch (25mm) Dome tweeters
- Output power
- 100W RMS (IEC60268)
- Power input
- 100 - 240V ̴ 50/60 Hz
- Frequency response
- 40Hz - 20kHz (-6dB)
- Signal-to-noise ratio
- > 80dB
- Wireless mic spec：
- Carrier frequency
- 2400~2480MHz
- Working Range
- <=30M (100'')
- Frequency Response
- 50Hz~15KH
- Signal-to-Noise
- >59dBA
- Transimitting Power
- <10dBm (EIRP)
- Product dimensions (W x H x D)
- 319.5 mm x 338.6 mm x 263 mm ( 12.58" x 13.33" x 10.35 ")
- Net weight
- 6.4 kg / 14.11 lbs
- Packaging dimensions (W x H x D)
- 385 mm x 365 mm x 350 mm / 15.16" x 14.37" x 13.78 "
- Gross weight
- 9.15 kg / 20.172 lbs
- USB format
- FAT16, FAT32
- Bluetooth® version
- 5.4
- Bluetooth® profile
- A2DP V1.4, AVRCP V1.6(SW), TMAP1.0, PBP1.0
- Bluetooth® transmitter frequency range
- 2.402GHZ~2.480GHZ
- Bluetooth® transmitter power
- ≤ 16 dBm (EIRP)
- Bluetooth® transmitter modulation
- GFSK, π/4 DQPSK, 8DPSK ,BLE1M, BLE2M
- USB Supported formats
- .MP3, .WAV, .WMA, .FLAC (Not for EMEA SKU)
- Input Sensitivity:
- Aux-In
- 370 mV RMS (3.5mm connector)
- Mic-In
- 20 mV RMS
- Guitar-In
- 100 mV RMS
- Bluetooth/USB input
- -9dBFS
- Battery type
- JBL Battery 200, Li-ion Battery(7.4V/4722mah)
- Battery charge time
- < 3.5 hours (Speaker off mode)
- Music play time
- up to 15 hours (varies by volume level and audio content)
- Cable type
- AC power cable (type varies by regions)
- Cable length
- 2.0m / 6.6 ft
- USB charge out
- 11V / 2A (Max) (Speaker off mode)
- Mic Rechargeable battery
- 240mAh 3.7V Li-ion battery
- Mic playtime
- Up to 10 hours (varies by volume level and audio content)
Bring the star power to your next party
Power up the JBL PartyBox Encore 2 and let the good times roll. With this portable speaker, you'll want to play DJ at every event, with smooth JBL Pro Sound, a light show to fit the mood, and a mic for your emceeing pleasure. Feel that extra oomph in your chest from the epic highs and deep lows, whether your playing a new pop ballad or going with a classic slow jam. Once you’ve nailed the soundcheck, it’s time to turn up the ambiance with a light show that grooves to your beats. Ready to run the show? Grab the digital wireless mic and become your own emcee or karaoke host! You can also customize your sound with adjustable echo, bass, and treble controls to make sure you sound just right. From open rooftops to crowded basements, the JBL PartyBox Encore 2 knows how to adapt, with its grab-and-go handle and IPX4 splash-proof design. What’s better than one JBL PartyBox Encore 2? Two! Pair them up for true stereo vibes or link with other JBL Auracast™-enabled speakers for an even wilder dance party. And if 15 hours of nonstop jams isn’t enough, grab a spare rechargeable battery to keep the music going. Make the vibes immaculate with the JBL PartyBox app, where you can control your playlist, add fun sound effects, and pick the perfect light show mood—all while you’re doing the worm on the dance floor. Whatever the occasion, the JBL PartyBox Encore 2 knows how to bring all the feels.
FAQs & How-Tos
-
It is possible to pair two of the same model of JBL PartyBox speakers together through TWS (True Wireless Stereo) mode.
PartyBox On-The-Go/100:
Connect just the left PartyBox with the chosen device first, with the right PartyBox turned off. The speaker that is connected first will automatically be the left channel. Now turn the right PartyBox on and continue with TWS pairing (detailed below).
PartyBox 200/300/1000:
A button (L/R) on the rear of the speakers is used to assign the correct channel to the speakers after pairing is made.
In order to activate TWS mode, press and hold the Bluetooth button on the first speaker until the notification chime sounds, about 5 seconds. Then press and hold the Bluetooth button on the second speaker until the notification chime sounds (as seen below). TWS mode is now activated. To disable TWS, press and hold the Bluetooth button on either speaker, or power off one speaker.
Partybox 110/310/710/Encore/Essential:
Press the buttons labelled TWS on both speakers to connect the speakers in TWS mode (pictured in item 2 in the image below, with two speakers on the button).
TWS can be activated and deactivated remotely in the JBL Partybox app, in addition to assigning the left and right channels to the correct speakers.
Once the TWS connection is setup, it will be in Stereo mode by default if both speakers are the same model, otherwise the speakers will be in Party mode by default if different Partybox models are used. You can also switch between Stereo and Party mode in the JBL PartyBox app if two of the same Partybox models are used.
Please note: In order to achieve TWS mode, the speaker must be the same model with the exception of the PartyBox 200 and PartyBox 300 which can be paired together via TWS. You cannot achieve TWS with a PartyBox 1000 and a PartyBox 300. You cannot achieve TWS with a PartyBox 100 and PartyBox 200. However, it is possible to connect a maximum of two of either the Partybox 110, 310, 710 or Encore/Essential together in Party mode - the two speakers then do not need to be the same model, but Stereo mode will not be possible.Was this helpful? Thank you for your feedback!
