


JBL Charge 4
Introducing the JBL Charge 4 portable Bluetooth speaker with full-spectrum, powerful sound and a built-in power bank to charge your devices. It features a proprietary developed driver and two JBL bass radiators that intensify sound with strong deep bass. Its high-capacity 7500mAh rechargeable Li-ion battery provides up to 20 hours of playtime. The speaker carries a convenient USB charge out to quickly charge your devices, such as your smartphone, so you will never run out of power again. The Charge 4 features a rugged design, IPX7 waterproof rated exterior and comes in a suite of cool colors. Together with JBL Connect+ it can wirelessly link more than 100 JBL Connect+ enabled speakers to elevate your listening experience.
Product Specifications
General Specifications
Output power (W) | 30 |
---|
Audio Specifications
Frequency response | 60Hz–20kHz |
---|---|
Signal-to-noise ratio | >80dB |
Dimension Specifications
Dimensions (in) | 8.7 x 3.7 x 3.7 |
---|---|
Dimensions (cm) | 22.1 x 9.4 x 9.4 |
Weight (kgs) | 0.96 |
Weight (lbs) | 2.12 |
Control Connect Specifications
Bluetooth profiles | A2DP V1.3, AVRCP V1.6 |
---|---|
Bluetooth frequency | 2.402 – 2.480GHz |
Bluetooth transmitted modulation | GFSK, π/4 DQPSK, 8DPSK |
Bluetooth transmitter power | 0-20dBm |
Bluetooth version | 4.2 |
Documents & Downloads
Spec Sheets
Quick Start Guide
Gallery








Videos
What’s in the Box
- 1 x JBL Charge 4
- 1 x Type C USB cable
- 1 x Quick-Start Guide
- 1 x Safety Sheet
- 1 x Warranty Card

FAQs & How-Tos
Pairing issues with a Computer or PC
In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).
The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:
• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.
• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device
Always get the latest driver version available for your Computer/PC/Laptop.
To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.
The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:
• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.
• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device
Always get the latest driver version available for your Computer/PC/Laptop.
To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.
The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
Was this helpful?
Thank you for your feedback!
JBL Portable App: PC Information
You cannot download the JBL Portable App on a PC. This app is only available on mobile devices.
Was this helpful?
Thank you for your feedback!
Waterproof Information (IPX7)
This unit is IPX7 rated, which means that you can submerge the unit in water as deep as 3 feet (1 meter) for up to 30 minutes.

Was this helpful?
Thank you for your feedback!
How do I reset the Charge 4?
In order to reset the Charge 4, with the unit on, press “Volume+” and “Bluetooth” at the same time for 3-4 seconds until you hear the audible chime.
Was this helpful?
Thank you for your feedback!