JBL Live Flex
True wireless Noise Cancelling earbuds
Documents & Downloads
- Driver size (mm)
- Charging Case IP Code
- Number of Microphones
- Driver sensitivity at 1kHz/1mW (dB)
- 101 dB SPL@1 kHz
- Dynamic frequency response range (Hz)
- 20 Hz - 20 kHz
- Impedance (ohms)
- Charging Case Weight (oz)
- Charging Case Weight (g)
- Earpiece Weight (g)
- Bluetooth version
- Bluetooth profiles
- A2DP 1.3.2, AVRCP 1.6.2, HFP 1.7.2
- Bluetooth frequency
- 2.4 GHz – 2.4835 GHz
- Bluetooth transmitted modulation
- GFSK, π/4-DQPSK, 8DPSK
- Bluetooth transmitter power
- <12 dBm
- Charging time (hours from empty)
- Maximum music play time with ANC off (hours)
- Maximum music play time with ANC on (hours)
- Maximum play time (hours)
- IP Code
- True Adaptive Noise Cancelling
- Charging cable
- Voice Assistant integration
- Built-in Microphone
- Multi-Point Connection
- Touch Control
- Adaptive Noise Cancelling
- Wireless Charging
- Active Noise Cancelling
- Spatial Sound
- Water Resistant
- Charging case
All day companion
Live to the beat of your personal soundtrack with open-ear True Adaptive Noise Cancelling earbuds designed for all-day comfort and high-fidelity listening on the go. From the office to your daily walk and beyond, the IP54-certified dustproof and waterproof JBL Live Flex is an ideal audio companion for work, rest, or play. Tune out noise and distractions and make crystal-clear calls anywhere, all while immersing yourself in JBL Spatial Audio. Optimize your listening experience according to your individual hearing profile thanks to Personi-Fi 2.0, and preferences through the App. And since nobody has time for flat batteries, up to 40 hours of playtime and Qi wireless charging keep you moving at the speed of life.
FAQs & How-Tos
As with all in-ear headphones, our range of TWS headphones can be susceptible to a build up of dust and earwax. This can cause low volume on one or both earbuds, or balance issues (e.g. right earbud is louder than the left earbud). To reduce the likelihood of these issues occurring, it is a good idea to periodically clean your earbuds and your ears. Clean the earbuds by removing dust and wax after each use, using a pointed toothpick to remove larger amounts and a small amount of rubbing alcohol applied to a cotton swab for final degreasing.
If you are experiencing volume or balance issues, always check for wax and dirt in and around the earbud and driver and complete cleaning of the earbuds as described above. If the issue persists, there may be earwax/dirt stuck in the small holes in the grille in front of the driver, preventing sound output. To resolve the issue try dipping the affected earbud tip into a solution of lukewarm tap water and a small amount of dish soap (washing up liquid). The earbud tip should only be put into the liquid up to a maximum depth of 1-2 mm only (see images below). Immersing the earbuds in water or putting the earbuds in water at a larger depth than this could void your warranty. Keep the earbud tip in the water for about 2-3 minutes, then wipe/clean the grille with a small brush (such as a toothbrush). The should remove the wax and resolve the volume/balance issues.
Was this helpful? Thank you for your feedback!
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off).
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.Was this helpful? Thank you for your feedback!
This headphone is supported by the My JBL Headphones App.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Talk to a product expert
Call us now at: +(662) 2560020
Mon - Fri - 9:00 a.m 6:00 p.m