JBL Tune Flex Ghost Edition

JBL Tune Flex Ghost Edition

True wireless Noise Cancelling earbuds

Sold from 2023 until now

Documents & Downloads

Product Specifications

Driver size (mm)
12
Number of Microphones
4
Driver sensitivity at 1kHz/1mW (dB)
110
Dynamic frequency response range (Hz)
20 Hz – 20 kHz
Impedance (ohms)
32
Charging Case Weight (g)
38.6
Charging Case Weight (oz)
1.4
Earpiece Weight (g)
9.6
Earpiece Weight (oz)
0.3
Bluetooth profiles
A2DP V1.3, AVRCP V1.6, HFP V1.7
Bluetooth frequency
2.4 GHz - 2.4835 GHz
Bluetooth transmitted modulation
GFSK, π/4-DQPSK, 8DPSK
Bluetooth transmitter power
<11 dBm
Bluetooth version
5.2
Charging case battery life (max hours)
18
Charging time (hours from empty)
2
Maximum music play time with ANC off (hours)
8
Maximum music play time with ANC on (hours)
6
Maximum play time (hours)
32
Maximum talk time (hours)
4.5
Bluetooth
Yes
Charging cable
Yes
Active Noise Cancelling
Yes
Ambient Aware
Yes
Built-in Microphone
Yes
Charging case
Yes
Hands Free Call
Yes
JBL Pure Bass Sound
Yes
Rechargable battery
Yes
Speed charge
Yes
TalkThru
Yes
Touch Control
Yes
True Wireless
Yes
Water Resistant
Yes
Wireless
Yes
IP Code
IPX4

Pure Bass. Zero noise.

Tackle your day one song at a time with the JBL Tune Flex. These true wireless earbuds give you up to 32 hours of exceptional JBL Pure Bass Sound, while the ergonomic and water-resistant design gives you all-day comfort in any weather. A simple touch allows you to manage and enjoy perfect calls anywhere, without ambient noises. And with Active Noise Cancelling and Smart Ambient technology, you choose whether you want to tune out the world or engage with your surroundings. The light stick open design ensures comfort all-day long and natural sound awareness. Best of all, the JBL Headphones App lets you personalize your entire listening experience. Stay connected to your world, your way.

Smartly designed 12mm drivers enhanced by the stick form factor deliver JBL's Pure Bass Sound so you'll feel every pulsing beat.
Hear more of what you want, less of what you don't. Active Noise Cancelling technology with 2 microphones lets you minimize audio distractions. With Ambient Aware, you can tune into your surroundings at any time so that you feel safer when you're out in the world, while TalkThru lets you stop for a quick chat without having to remove your headphones.
Enjoy hassle-free, hands-free calls in stereo. The Tune Flex are equipped with 4 microphones, so you'll always be heard with perfect clarity. Never hesitate to take or make a call again. And with VoiceAware, you can choose how much of your own voice to hear by controlling the amount of mic input routed back into your earbuds.
Never miss a beat with 32 (8+24) hours of battery life or 6 hours, plus 18 hours in the case when noise cancelling is engaged. Need a boost? Speed Charge for just 10 minutes to get 2 hours of playtime.
Don't be deterred by bad weather. Thanks to IPX4 water resistance and sweat proofing, there isn't a workout or downpour the Tune Flex can't handle.
Never be without your music. The stick open design ensures comfort without pressure and natural sound awareness. Additional Sealing tips in 3 sizes together with the Sealing Ear tip mode in the App allow you to create environmental sound sealing without compromising the light, sleek design of these earbuds.
The JBL Headphones App lets you enjoy your music your way. Customize your listening experience and the touch control gestures, find your earbuds, control the environmental noise and the Smart Audio & Video modes. Download the App for free and discover how much more you can do.

FAQs & How-Tos

4 results
  • As with all in-ear headphones, our range of TWS headphones can be susceptible to a build up of dust and earwax. This can cause low volume on one or both earbuds, or balance issues (e.g. right earbud is louder than the left earbud). To reduce the likelihood of these issues occurring, it is a good idea to periodically clean your earbuds and your ears. Clean the earbuds by removing dust and wax after each use, using a pointed toothpick to remove larger amounts and a small amount of rubbing alcohol applied to a cotton swab for final degreasing.

    If you are experiencing volume or balance issues, always check for wax and dirt in and around the earbud and driver and complete cleaning of the earbuds as described above. If the issue persists, there may be earwax/dirt stuck in the small holes in the grille in front of the driver, preventing sound output. To resolve the issue try dipping the affected earbud tip into a solution of lukewarm tap water and a small amount of dish soap (washing up liquid). The earbud tip should only be put into the liquid up to a maximum depth of 1-2 mm only (see images below). Immersing the earbuds in water or putting the earbuds in water at a larger depth than this could void your warranty. Keep the earbud tip in the water for about 2-3 minutes, then wipe/clean the grille with a small brush (such as a toothbrush). The should remove the wax and resolve the volume/balance issues.

    cleaning-earstick-tip 
  • It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all TWS earphones and cases.
  • Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off). 
    This restores the earbuds to the factory defaults.
    TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
    It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • This headphone is supported by the My JBL Headphones App.

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: +(662) 2560020

Mon - Fri - 9:00 a.m 6:00 p.m