JBL E65BTNC

JBL E65BTNC

Wireless over-ear noise-cancelling headphones

Sold from 2013 until now

Documents & Downloads

Product Specifications

Driver size (mm)
40.0
Driver sensitivity at 1kHz/1mW (dB)
95dB
Dynamic frequency response range (Hz)
20 Hz - 20 kHz
Impedance (ohms)
32.0
Number of drivers per ear
1.0
Headphone cable length (cm)
133.4
Headphone cable length (ft)
4.4
Weight (g)
258.0
Weight (oz)
9,1
Bluetooth profiles
HFP v1.6, HSP v1.2, A2DP v1.2, AVRCP v1.4
Bluetooth frequency
2.402GHz-2.48GHz
Bluetooth transmitted modulation
GFSK,π/4DQPSK, 8DPSK
Bluetooth transmitter power
0-4 dbm
Bluetooth version
4.1
Charging time (hours from empty)
2.0
Maximum music play time with ANC off (hours)
30.0
Maximum music play time with ANC on (hours)
15.0
Maximum play time (hours)
24.0
Maximum talk time (hours)
24.0
Bluetooth
Yes
Active Noise Cancelling
Yes
Built-in Microphone
Yes
Detachable Cable
Yes
Fabric headband
Yes
Flat-fold design
Yes
Hands Free Call
Yes
JBL Signature Sound
Yes
Multi-Point Connection
Yes
Over-ear
Yes
Rechargable battery
Yes
Controls on Ear Cups?
Yes
Speed charge
No
Wireless
Yes

Tune out the world so you can get into your music.

The JBL E65BTNC headphones combine eye catching design and premium materials to deliver the world-renowned JBL Signature Sound with wireless convenience and superior active noise cancelling capabilities. With a soft, comfortable fabric headband and angled, form fitting, ear cushions for longer, more enjoyable and immersive listening sessions, the JBL E65BTNC headphones provide active noise-cancelling for both wired and wireless mode. They also provide up to 24 hours of battery life in Bluetooth mode (15 hours max in Bluetooth and noise cancelling mode) and can be completely recharged in just two hours. Multi-tasking is made easy as the JBL E65BTNC headphones will seamlessly switch between two devices ensuring that you never miss a call while enjoying your favorite playlist or watching a movie. In addition, you will also enjoy a detachable, tangle free fabric cord with one button remote, 3 different color options and a flat folding design for easy transportation.

The legendary JBL Signature sound as found in theaters, arenas and studios around the world is now available in a headphone.
Active noise cancelling reduces outside noise for a more immersive sound experience.
Enjoy crystal clear wireless sound and convenient hands-free calling.
Enjoy playlist after playlist from sun up to sundown and more in Bluetooth mode
A rapid two-hour charging gets you up to 24 hours of playback.
Effortlessly switch from music on your portable device to a call from your phone, so that you never miss a call.
Optimized ergonomic design and soft touch material allows for a better fit and longer more comfortable listening sessions.
Allows easy management of music and calls from virtually every portable device
Just one click on the ear cup power button connects you with Siri or Google Now.

FAQs & How-Tos

9 results
  • Yes. Our E series/Duet headphones are made with synthetic protein leather.
  • Yes. The E65BTNC headphones have the ability to pair and connect to two devices at the same time.
  • Yes, but only via cabled connection. When you insert the USB charging cable, Bluetooth is switched off, so wireless listening is not possible.
  • Yes, you do not need to have music playing to keep the noise cancelling switched on. There may be a slight residual hiss from the NC system, which would usually be masked by music, but there will still be a significant reduction of external noise.
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

    If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • With the headphones switched ON, press and hold the Volume + and Volume - buttons for more than 5 seconds. The LED blinks slowly for about two seconds, and now you have reset to factory settings.
  • Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. If you are attempting to pair to a different device, make sure the E65BTNC headphones are turned on, and press and hold the Bluetooth button located at the bottom of the right ear cup. The headphone should display on your new device within 3-5 seconds on your list of discoverable devices.
  • The E65BTNC noise cancellation button is located on the bottom Right ear cup. To turn the Active Noise Cancellation on, press and hold the button (Located next to the Bluetooth button) for 2-3 seconds or until you hear the confirmation audio tone. To turn off the noise cancellation, press and hold for 2 seconds or until you hear the audio tone powering off. A white LED next to the button lights up when NC is on.
  • In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).

    The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:

    • A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.

    • AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device

    Always get the latest driver version available for your Computer/PC/Laptop.

    To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.

    The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call Us now at: +(662) 2560020

Mon - Fri - 9:00 a.m 6:00 p.m