JBL Endurance Race 2
High-performance true wireless sports earbuds that are fully waterproof and dustproof with a secure fit
Documents & Downloads
Product Specifications
- Driver size
- 6.8 mm/ 0.27" Dynamic Driver
- Power supply
- 5V 1A
- Maximum operation temperature
- 45°C
- Frequency response
- 20 Hz - 20kHz
- Impedance
- 16 ohm
- Sensitivity
- 104 dB SPL@1 kHz
- Maximum SPL
- 94 dB
- Microphone sensitivity
- -38 dBV/Pa@1 kHz
- Earbud
- 6.4 g per pc (12.8 g combined) 0.014 lbs per pc (0.028 lbs combined)
- Earbud length (mm)
- 30.1mm
- Earbud width (mm)
- 26.4mm
- Earbud depth (mm)
- 18.9mm
- Charging case
- 41.1 g/ 0.09 lbs
- Charging case length (mm):69.7mm
- Charging case width (mm)
- 43.1mm
- Charging case depth (mm)
- 30.5mm
- Bluetooth version
- 5.3
- Bluetooth profile version
- A2DP V1.4, AVRCP V1.6.2, HFP V1.8
- Bluetooth transmitter frequency range
- 2.4 GHz - 2.4835 GHz
- Bluetooth transmitter power
- < 10 dBm (EIRP)
- Bluetooth transmitter modulation
- GFSK, ð/4-DQPSK, 8DPSK
- Earbud battery type
- Lithium-ion battery (70mAh/ 3.85V)
- Charging case battery type
- Lithium-ion battery (600mAh/ 3.85V)
- Charging time
- 2 hrs from empty
- Music playtime with BT on and ANC off
- Up to 12 hrs
- Music playtime with BT on and ANC on
- Up to 10 hrs
- Talk time with ANC off
- Up to 7 hrs
- Talk time with ANC on
- Up to 6.5 hrs
Amplify your performance Keep the world out and your workout on See how far you go—when your earbuds can keep up The sound of peak performance
Stay focused and ready to move with JBL Endurance Race 2 true wireless active earbuds. With 48 hours of battery life* and an IP68 waterproof and dustproof design, they’re built to keep going strong in even the most challenging workout conditions. Their superior fit with optimum sealing, stability in your ears, and all-day comfort, will keep you active from the beach to the boardroom. Powerful 6.8mm dynamic drivers deliver JBL Pure Bass sound. Keep your focus with Active Noise Cancelling, while Smart Ambient technology keeps you aware of your surroundings. Adjust the Sports Mode settings to the intensity of your workout, choosing one of the six default settings in the JBL Headphones App - or customize your own. And with the ability to make crystal clear calls from anywhere, you'll stay connected to the world no matter where your workout takes you. (*with ANC off)
The JBL Endurance Race 2 is made for your toughest workout. Their IP68 rating means they're fully dustproof and waterproof, with complete protection against solid particles and the ability to survive being submerged deeper than a meter in both fresh water and sea water. Even the charging case is IPX2 water-resistant, so it can come along on your next rainy-day run.
The ergonomic wing enhancer on the JBL Endurance Race 2 earbuds uses Twistlock™ technology. That means a better seal and with more stability in your ears when you're using them, not to mention all-day comfort.
Use the JBL Headphones app to match your workout with ANC, Ambient Aware and EQ. Adjust the settings to the intensity of your workout, choosing one of the six default Sports Modes - or you can customize your own. And when your workout is over, chill out and recharge in Relax Mode by choosing one of five peaceful sounds, like gentle ocean waves or a crackling wood fire.
JBL Endurance Race 2 earbuds use Active Noise Cancelling to listen to your surroundings and filter out distracting noise. Smart Ambient lets you control how much of the outside world you want to hear, so you can talk with others or stay aware of your surroundings—all without taking your earbuds out.
Two beamforming mics on each earbud pick up and transmit your voice while canceling out ambient noise. So you can make clear, crisp calls even when you're jogging through a busy park on a breezy day.
JBL Endurance Race 2 earbuds feature 6.8mm dynamic drivers that deliver powerful JBL Pure Bass sound.
Enjoy 12 hours of playtime, plus another three full charges (36 hours) in the charging case.* Need to recharge even faster? 10 minutes on a USB type-C charging cable will give you another four hours of playtime. (*with ANC off)
Pair your JBL Endurance Race 2 earbuds with two Bluetooth® devices and then switch effortlessly from one to the other. So if you're watching a video on your tablet, you won't miss a call on your mobile phone.
JBL Endurance Race 2 come enabled with both Fast Pair by Google and Swift Pair by Microsoft, so you can pair both your Android devices and Microsoft computer with a single tap.
FAQs & How-Tos
3 results
-
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.
If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
Repeat until the contact points are visibly clean, and charging should work as designed.
Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all TWS earphones and cases.Was this helpful? Thank you for your feedback! -
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off).
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.Was this helpful? Thank you for your feedback! -
This headphone is supported by the My JBL Headphones App.Was this helpful? Thank you for your feedback!
Images & Videos
