P560C

P560C

225-watt, two-way, 5-1/4" component speakers

Sold from 2008 until now

Predecessor Product: POWER P550C
Made in: China

Documents & Downloads

Product Specifications

Series
Power Series
Size
5-1/4
Type
Two-Way
Power Handling (RMS)
75W
Frequency Response
55Hz–23kHz
Power Handling (Peak)
225W
Sensitivity
(2.83V@1m) 92dB
Nominal Impedance
2 ohms
Mounting Cutout Diameter Woofer (mm)
130
Mounting Cutout Diameter Tweeter (in)
2-3/16
Mounting Depth Tweeter (mm)
17
Mounting Cutout Diameter Woofer (in)
5-1/8
Mounting Depth (mm)
52.5
Mounting Cutout Diameter (in)
5-1/8
External Diameter Woofer (in)
5-1/8
Mounting Depth Woofer (mm)
52.5
External Diameter Tweeter (mm)
54.5
Mounting Depth Woofer (in)
2-1/16
External Diameter Tweeter (in)
2-3/16
Mounting Cutout Diameter (mm)
130
Mounting Cutout Diameter Tweeter (mm)
54.5
External Diameter Woofer (mm)
130
Mounting Depth (in)
2-1/16
External Diameter (mm)
130
External Diameter (in)
5-1/8
Mounting Depth Tweeter (in)
11/16
High-Frequency Transducer
PlusOne® HCL™ honeycomb-laiminate cone

Realistic, live-performance sound needs to be loud. But it also needs to be detailed, meticulous, accurate and distortion-free. Can you really have all of that in your car? Yes, with the JBL® P560C. The system has advanced, inventive, game-changing technology. The proprietary, patented Plus One® (patent no. 7,548,631), honeycomb-laminate HCL™ woofer cone combines extreme stiffness with low weight for increased efficiency, signature JBL bass, exceptional midrange clarity and low distortion even at high output levels. The high-bandwidth, textile- dome tweeters with the patented I-Mount™ (patent no. 5,859,917) tweeter-mounting system deliver precise imaging. Your friends will beg you to be the “designated driver” every time.

The P560C woofer cone is exceptionally stiff and lightweight, with up to 25 percent more active surface area than a standard cone of the same size. Patented Plus One® (patent no. 7,548,631) woofer cones and long-excursion surrounds boost bass output and efficiency by two to three decibels compared with competing products.
The JBL® P560C has tweeter-level control. Use the simple switches to set the tweeter output level for personal listening preferences or different mounting locations.
You’ll have 90W RMS and 270W peak power handling with a 94dB sensitivity rating. And you can push it to the limit. You’ll hear true JBL® sound, with nothing under- or over-emphasized. The P560C has a frequency response of 55Hz to 23kHz.
In addition to better sound quality, the new, proprietary, JBL®-patented woofer design offers far higher SPL (sound pressure level) and better suspension symmetry than the previous generation of products.
These speakers make the best use of any amplifier by providing an optimum 2-ohm load. They use a lower-impedance voice coil than a typical speaker to extract the most power and performance possible from all amplifiers engineered to drive loads of 2 ohms or less.
The P560C component system networks have in-line polypropylene caps and low-insertion-loss air-core inductors. Outboard crossovers are integrated into a harness connected to each speaker model for easy installation. Oversized Direct-Connect terminals ensure perfect connectivity for bare speaker wires.

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: +(662) 2560020

Mon - Fri - 9:00 a.m 6:00 p.m