JBL JR300BT - Punky Pink - Kids Wireless on-ear headphones - Hero JBL JR300BT - Punky Pink - Kids Wireless on-ear headphones - Front JBL JR300BT - Punky Pink - Kids Wireless on-ear headphones - Detailshot 1
JBL JR300BT - Punky Pink - Kids Wireless on-ear headphones - Hero
  • JBL JR300BT - Punky Pink - Kids Wireless on-ear headphones - Swatch Image
  • JBL JR300BT - Rocker Blue - Kids Wireless on-ear headphones - Swatch Image
  • JBL JR300BT - Teal - Kids Wireless on-ear headphones - Swatch Image
  • JBL JR300BT - Tropic Teal - Kids Wireless on-ear headphones - Swatch Image
  • JBL JR300BT - Pink - Kids Wireless on-ear headphones - Swatch Image

JBL JR300BT

Safe, lightweight and sized for kids, the JBL JR300BT wireless headphones deliver up to 12 hours of legendary JBL sound and fun for the youngest music fans. Headphones are designed to ensure the volume is always below 85dB to protect hearing and easy controls can be operated without any help. Kids listen in comfort with custom designed soft padded headband and ear cushions for a feathery fit. Kids will also enjoy the ability to customize the headphones with the available stickers.

Product Specifications

General Specifications

Driver size (mm) 32.0

Audio Specifications

Dynamic frequency response range (Hz) 20 Hz - 20 kHz
Impedance (ohms) 32.0
Number of drivers per ear 1.0

Dimension Specifications

Weight (g) 110.0
Weight (oz) 3,88

Control Connect Specifications

Bluetooth profiles HFP v1.5, HSP v1.2, A2DP v1.2, AVRCP v1.5
Bluetooth frequency 2.402GHz-2.48GHz
Bluetooth transmitted modulation GFSK,π/4DQPSK, 8DPSK
Bluetooth transmitter power 0-4 dbm
Bluetooth version 4.0
Please consult the documents for in-depth specs

Documents & Downloads

Videos

What’s in the Box

  • 1 x Pair of JBL JR300BT headphones
  • 1 x USB charging cable
  • 1 x Quick start guide
  • 1 x Warranty card
  • 1 x Warning card
JBL JR300BT - What's in the Box

FAQs & How-Tos

Reset Information
To reset the headphones, power on the headphones and plug in the USB cable into a USB charger or USB port. Paired mobile devices should disconnect and the led should be constant white. When unplugging the USB cable, the headphones will power off. When manually powering on the headphones, and the last connected mobile phone is not in range, the headphones will revert to Bluetooth Pairing mode ( blue led will blink ) after 5 seconds.
Headphone Material Information
These headphones consist of plastics, synthetic leathers and foams. All JBL Jr products were put through extensive tests and are compliant with Standard Consumer Safety Specification for Toy Safety.
How do you power on a pair the JR 300BT headphones?
Press the power button located on the bottom of the Right Ear cup. If this is your first time using the headphones, it should immediately start looking for a device to connect to. Make sure that the device that you are trying to connect to is in pairing mode. The JBL JR300BT should display on your discoverable devices within 2-5 seconds. If the headphones have not successfully connected to the device, press and hold the Bluetooth button located next to the Power button on the Right Ear Cup for 2 seconds. As the headphones go into pairing mode, they should connect to your device within 2-5 seconds.
Microphone Information
Yes. This headphone has a built in microphone. To answer a call, press the power button which is located on the Left Ear Cup for 1 second. If you wish to hang up the call, press and hold the power button for 2 seconds.
Pairing issues with a Computer or PC
In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).

The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:

• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.

• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device

Always get the latest driver version available for your Computer/PC/Laptop.

To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.

The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
Power and Pair Information
Press and hold the power button located on the RIGHT ear cup. Make sure that the device is on and in Bluetooth range. If this is the first time connecting the device, it will automatically go into pairing mode. You will notice the LED light alternate between blue and white as it searches for a device to connect to. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect.

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: +6566222003

Mon - Fri - 8:00 a.m 5:00 p.m (SGT)

E-mail Us

E-mail Us

365 days a year

We will respond within one business day.

Email Us
Chat with Us

Chat with Us

Mon - Fri - 8:00 a.m 5:00 p.m (SGT)