


JBL Tune 600BTNC
Introducing the JBL TUNE600BTNC active noise-cancelling wireless on-ear headphones, a flat-folding lightweight and compact solution for everyday use. The JBL TUNE600BTNC feature 32mm JBL drivers that helps deliver JBL Pure Bass sound. Sound that can be enjoyed without unnecessary noise for up to 12 hours wirelessly and can be fully recharged in only 2 hours. And thanks to the additional detachable cable, music can be enjoyed endlessly in wired mode, with or without Active Noise-Cancelling. Made with durable materials and designed in four fresh colors, the JBL TUNE600BTNC allow you to connect to your world quickly thanks to buttons on the ear cups that allow for easy hands-free management of calls and music.
Product Specifications
General Specifications
Driver size (mm) | 32.0 |
---|
Audio Specifications
Driver sensitivity at 1kHz/1mW (dB) | 100dB |
---|---|
Dynamic frequency response range (Hz) | 20 Hz - 20 kHz |
Impedance (ohms) | 32.0 |
Number of drivers per ear | 1.0 |
Dimension Specifications
Weight (g) | 173.0 |
---|---|
Weight (oz) | 6.1 |
Control Connect Specifications
Bluetooth profiles | HFP v1.6, HSP v1.2, A2DP v1.2, AVRCP v1.5 |
---|---|
Bluetooth frequency | 2.402GHz-2.48GH |
Bluetooth transmitted modulation | GFSK, /4DQPSK, 8DPSK |
Bluetooth transmitter power | 0-4 dbm |
Bluetooth version | 4.1 |
Documents & Downloads
Spec Sheets
Quick Start Guide
Gallery









What’s in the Box
- 1 x Pair of JBL Tune 600BTNC Headphones
- 1 x Charging cable
- 1 x Detachable cable
- 1 x Quick Start Guide
- 1 x Warning card
- 1 x Warranty card
- 1 x Safety Sheet

FAQs & How-Tos
Is it possible to listen to music on TUNE600BTnc while charging it?
Yes, but only via cable, and noise cancelling cannot be activated meanwhile.
Since the charging socket is located on top of the ear pod, adjustment is limited in that direction while the micro-USB plug is inserted.
Was this helpful?
Thank you for your feedback!
How to reset Tune 500/600 BT Headphone
In order to reset the headphones:
Long Press of volume + and volume - at the same time while the unit is on. Make sure that bluetooth is NOT on and connected to any device.
When reseting, LED will blink faster.
Long Press of volume + and volume - at the same time while the unit is on. Make sure that bluetooth is NOT on and connected to any device.
When reseting, LED will blink faster.
Was this helpful?
Thank you for your feedback!
Is the Tune600BTNC water-proof?
No. The 600BTNC headphone does not feature any IPX rating that protects it against sweat or water. Over exposure to water can compromise the controls on the headphones.
Was this helpful?
Thank you for your feedback!
Can I use my TUNE600BTnc as noise-reduction headset without music?
Yes, you can activate the noise reduction circuits alone, with no connection to a source device by Bluetooth or cable.
The headphones will stay on as long as there is power in the battery, which is close to 30 hours for pure NC function.
Please note that there is a slight residual noise from the NC system, which will be drowned out by music playing, or by surrounding noise such as airplane noise.
If you use the NC in surroundings that are near quiet to begin with, you may not get an improvement in noise level.
Was this helpful?
Thank you for your feedback!
Does the Tune600BTNC feature an audio cable?
Yes. The 600BTNC features an audio cable that you can use if you do not wish to use the headphones via wirelessly.
Was this helpful?
Thank you for your feedback!
Pairing issues with a Computer or PC
In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).
The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:
• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.
• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device
Always get the latest driver version available for your Computer/PC/Laptop.
To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.
The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:
• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.
• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device
Always get the latest driver version available for your Computer/PC/Laptop.
To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.
The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
Was this helpful?
Thank you for your feedback!
Can’t find what you’re looking for?
Chat with Us
Mon - Fri - 8:00 a.m 5:00 p.m (SGT)