JBL EVEREST™ 310
Slip on the JBL Everest 310 and you’ll experience up to 20 hours of wireless freedom, the thrill of mind blowing, Legendary JBL Pro Audio sound and the ergonomic comfort offered by premium material finishes and a snug fit. Share Me 2.0 technology allows you to connect and share your music with friends, via Bluetooth. A quick 2-hour recharge, a sleek flat-fold design and a compact hard carrying case make these headphones the perfect companion for your busy lifestyle. A built in microphone facilitates crystal clear hands-free calls, and easy controls on the ear cup let you take charge of your music. Available in four metallic finishes, these headphones put your passion and life, front and center. Dare to listen.
Product Specifications
General Specifications
| Driver size (mm) | 40.0 |
|---|
Audio Specifications
| Driver sensitivity at 1kHz/1mW (dB) | 96dB |
|---|---|
| Dynamic frequency response range (Hz) | 10Hz-22kHz |
| Impedance (ohms) | 32.0 |
| Number of drivers per ear | 1.0 |
Dimension Specifications
| Weight (oz) | 8,32 |
|---|
Control Connect Specifications
| Bluetooth profiles | HFP v1.7, HSP v1.2, A2DP v1.3, AVRCP v1.6 |
|---|---|
| Bluetooth frequency | 2.402GHz-2.48GHz |
| Bluetooth transmitted modulation | GFSK,π/4DQPSK, 8DPSK |
| Bluetooth transmitter power | 0-4 dbm |
| Bluetooth version | 4.1 |
Documents & Downloads
Spec Sheets
Quick Start Guide
Gallery
Videos
What’s in the Box
- 1 x Headphones
- 1 x Detachable remote cable
- 1 x Charging cable
- 1 x Carrying case
- 1 x Quick start guide
- 1 x Warning card
- 1 x Warranty card
- 1 x Safety sheet
FAQs & How-Tos
Can I connect to multiple devices at the same time on the Everest 310/710 headphones?
To pair and connect to a different device, press and hold the bluetooth button located on the bottom of the right ear cup until you hear the audible voice stating "looking for device." Make sure the the device you are trying to connect to are in search mode. The headphones should display on "Discoverable Devices" within 2-3 seconds. Choose the Pair option and you should hear the audible voice state "connected" and the LED light should transition into a slow blinking blue light.
Was this helpful?
Thank you for your feedback!
Does the audio cable on the Everest 310/710 feature volume control?
No the audio cable included with the Everest series headphones is a one button microphone that features pause/play, track control and gives you the ability to answer and hang up phone calls. You are able to control the volume when the headphones are connected through bluetooth.
Was this helpful?
Thank you for your feedback!
How does ShareMe work?
For models E40BT and E50BT
Connect the first headphone by BT to your mobile device
Tap the ShareMe button once
Tap the ShareMe button on the 2nd headphones twice ( ! )
The headphones will connect to each other.
When changing volume on source device, or BT connected headphones, the volume will only change on THAT headphone ( and in some cases the source device, like iOS devices and newer Android ), not on the one connected via ShareMe.
When changing volume on a via-ShareMe-connected headphone ( 2nd ), it will not change volume on source device, or on the BT-connected headphone.
To sum up, both headphones have their individual volumes.
For Everest models ( not ELITE ).
Connect the headphones by BT to your mobile device
Put the 2nd device ( speaker, headphones as long as they have Bluetooth ) in "BT discovery mode"
Press the ShareMe button on the Everest headphone ( button marked with a little "s" )
The Everest will connect to BT device. (Please note that you may not be able to pair from the Everest to the Everest Elite models, or if you can pair, you may have dropouts in sound).
When changing volume on source device, or Everest, the volume will only change on the Everest ( and in some cases the source device, like iOS devices and newer Android ), not on the device connected via ShareMe.
When changing volume on via-ShareMe-connected BT device ( 2nd ), it will not change volume on source device or Everest.
Please note that it is NOT possible to use ShareMe if you are listening to analog signal via cable. Bot the E-series and the Everest models will switch off the Bluetooth circuits as soon as you insert the audio cable, so re-transmission is not possible.
Was this helpful?
Thank you for your feedback!
Do the Everest Series headphones support AAC or aptX?
Sorry, neither AAC nor aptX are supported.
Was this helpful?
Thank you for your feedback!
How do I reset my JBL Everest 310, 710 and 750 Elite headphones?
With the headphones switched ON, press VOLUME + and VOLUME - , and hold them for 5 seconds.
Your headphones are now reset to factory settings.
This is true for Everest 310, 710, Elite 750, 310GA and 710GA.
Was this helpful?
Thank you for your feedback!
Can’t find what you’re looking for?
Chat with Us
Mon - Fri - 8:00 a.m 5:00 p.m (SGT)
