JBL SOUNDGEAR
Wearable wireless sound
Sold from 2017 until now
Getting started with your JBL SOUNDGEAR
Documents & Downloads
Product Specifications
- Driver size (mm)
- 31.0
- Driver sensitivity at 1kHz/1mW (dB)
- 96dB
- Dynamic frequency response range (Hz)
- 100Hz-20kHz
- Impedance (ohms)
- 32.0
- Number of drivers per ear
- 1.0
- Weight (g)
- 350.0
- Weight (oz)
- 12,35
- Bluetooth profiles
- HFP v1.6, HSP v1.2, A2DP v1.3, AVRCP v1.5
- Bluetooth frequency
- 2.402GHz-2.48GHz
- Bluetooth transmitted modulation
- GFSK,π/4DQPSK, 8DPSK
- Bluetooth transmitter power
- 0-4 dbm
- Bluetooth version
- 4.2
- Charging time (hours from empty)
- 2.0
- Maximum music play time with ANC off (hours)
- 6.0
- Maximum play time (hours)
- 6.0
- Maximum talk time (hours)
- 6.0
- Built-in Microphone
- Yes
- Hands Free Call
- Yes
- JBL Signature Sound
- Yes
- Multi-Point Connection
- Yes
- Rechargable battery
- Yes
- Controls on Ear Cups?
- Yes
- Siri/ Google Now
- Yes
- Speed charge
- No
- Wireless
- Yes
Life at home has a soundtrack
Introducing a totally new way of experiencing sound at home – by wearing it. Thanks to the JBL Signature Sound wireless performance, the Soundgear creates your own personal sound zone while allowing you to remain fully aware of your surroundings. Bluetooth®-enabled for sound streaming from compatible devices, the JBL Soundgear features Quad transducers with Bass boost for an exciting sound experience and up to 6 hours of playback time, a quick recharge time of 2 hours. Thanks to its dual mic conferencing system with echo-cancelling technology it provides crystal clear phone calls. The around-the-neck construction, ergonomic shape, intuitive controls, and soft touch fabric finish provide a hands-free and ears-free audio experience unlike any you’ve ever had before. Whether you want to give your VR experience a boost with immersive audio, watch a video, add music to your daily activities around the house or take a conference call, the JBL Soundgear provides you with an exciting, pervasive sound experience with total freedom and comfort.
FAQs & How-Tos
-
While you have an incoming call, and you can hear the call-tone from your SoundGear, simply adjust the SoundGear's call-tone level to the desired intensity, using the SoundGear's volume buttons.Was this helpful? Thank you for your feedback!
-
No. The two Soundgears can connect to the BTA, but not to each other. Also, when using one Soundgear, the use of aptxLL may result in a delay. If you are connected to two, the delay may be more noticeable, since LL is no longer active.Was this helpful? Thank you for your feedback!
-
No, Soundgear is wireless Bluetooth only, and needs to be charged to play music. But the BTA 20 transmitter must of course be connected with a cable to the signal source.Was this helpful? Thank you for your feedback!
-
Yes, all sources that output analog stereo line-level signals or stereo audio optical digital signals may be used, cable-connected to the BTA 20 transmitter. Digital signals must be in PCM format. So if you have a CD player or an FM radio, you can connect the BTA 20 to it, and transmit to your Soundgear (or to other Bluetooth headphones that support the format). Please note that record players need an additional preamplifier to work this way. Of course a TV set can be connected as well, either via optical digital PCM output, via line outputs or via headphone output.Was this helpful? Thank you for your feedback!
-
Yes, you can use your Soundgear for TV watching or playing video games. You can use the TV speakers and the Soundgear simultaneously, they will be synchronized in time.Was this helpful? Thank you for your feedback!
-
Yes, in two hours, you can charge it to approx. 6 hours of playing time.Was this helpful? Thank you for your feedback!
-
Yes, Soundgear supports aptX LL (Low Latency). (aptX is a way of packing more information into a compressed version of a signal).Was this helpful? Thank you for your feedback!
-
To answer and hang up calls, press the pause/play button located on the left arm of the Soundgear.Was this helpful? Thank you for your feedback!
-
Slide the power button in an upwards position. The power button will be located on the right arm next to the bluetooth button. Once you power on you will hear the audio chime. If this is your first time powering on the speaker, it will automatically go into pairing mode. You will see the fast blinking LED light as it searches for a device. Make sure that the device you are attempting to connect to is in pairing mode. The JBL Soundgear should be displayed on your discoverable devices within 3-8 seconds. Choose the JBL Soundgear and you are now connected!Was this helpful? Thank you for your feedback!
-
Please make sure that the audio out format is set to PCM in the TV. Dolby Digital or other surround formats will not work with the BTA 20 transmitter.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with Us
Mon - Fri - 8:00 a.m 5:00 p.m (SGT)