JBL Endurance Peak II

JBL Endurance Peak II

Waterproof true wireless sport earbuds

Sold from 2020 until now

Getting started with your JBL Endurance Peak II

Getting started with your JBL Endurance Peak II

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Driver size (mm)
10
Driver sensitivity at 1kHz/1mW (dB)
95
Dynamic frequency response range (Hz)
20 Hz - 20 kHz
Impedance (ohms)
16
Number of drivers per ear
1
Charging Case Weight (g)
77
Charging Case Weight (oz)
2.7
Earpiece Weight (g)
26
Earpiece Weight (oz)
0.9
Bluetooth profiles
A2DP 1.3 AVRCP 1.5 HFP 1.7
Bluetooth frequency
2.4 GHz – 2.4835 GHz
Bluetooth transmitted modulation
GFSK, π/4DQPSK, 8DPSK
Bluetooth transmitter power
0 - 13dbm
Bluetooth version
5.0
Charging case battery life (max hours)
24
Charging time (hours from empty)
2
Maximum play time (hours)
6
Bluetooth
Yes
Touch Control
Yes
Voice Assistant integration
Yes
Built-in Microphone
Yes
Charging case
Yes
Hands Free Call
Yes
JBL Pure Bass Sound
Yes
Powerhook
Yes
Rechargable battery
Yes
Sweat Proof
Yes
True Wireless
Yes
Waterproof
Yes
Wireless
Yes
IP Code
IP67

Never hurt, never fall out

A serious workout deserves serious gear. JBL Endurance Peak II true wireless headphones deliver JBL Pure Bass sound to fuel your workout, while providing comfort and connectivity to keep you going strong. Get next-level motivation with 30 hours of combined battery life, starting from the moment you wear them, thanks to the Powerhook™. Intuitive touch controls allow you to take hands-free calls and access your voice assistant, while dual connect ensures you’ll always be in control as the earbuds work independently. Their ergonomic fit and sweatproof/waterproof design let you exercise longer and harder, wherever your workout takes you.

Get enough bass to give your whole body a boost and get that extra push right when you need it the most.
With a battery that lasts as long as you can, you've got the extra inspiration it takes to make you go that extra mile.
The Endurance PEAK II adjusts to you, not the other way around. The bendable wire on the ear hook lets you adjust the headphone to your size and comfort level. Also, you can stay focused on the task at hand with music that starts and stops when you do and controls intuitive enough to almost read your mind make it easy to stay in the groove.
It doesn't matter which headphone you take out of the case first. You can take calls, adjust volume, or use your voice assistant on either ear, so you can stay flexible and never mess with your momentum.
Keep in contact with your people and stay in control of your playback without ever interrupting the flow of your workout.
Go ahead. Get as wet as you want. Whether it's rain or pure, honest sweat, no worries for the Endurance Peak II, as they are sweat/waterproof. Ready to go as far as you go, the IP67 rating makes these headphones extremely durable against any elements.

FAQs & How-Tos

5 results
  • It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all TWS earphones and cases.
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

    If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • Place both ear pods in the charging box, while the charging box is plugged into a power source. Press and hold the button on the Right pod for about 5 seconds. The LED on the pod will turn off and then turn back on again. This restores to factory defaults. (Please note that charging must take place for reset to work.) It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).

    The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:

    • A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.

    • AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device

    Always get the latest driver version available for your Computer/PC/Laptop.

    To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.

    The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
  • This unit is IPX7 rated, which means that you can submerge the unit in water as deep as 3 feet (1 meter) for up to 30 minutes.

    IPX7-icon.png

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: +6566222003

Mon - Fri - 8:00 a.m 5:00 p.m (SGT)

E-mail Us

E-mail Us

365 days a year

We will respond within one business day.

Email Us
Chat with Us

Chat with Us

Mon - Fri - 8:00 a.m 5:00 p.m (SGT)

message

Text or Whatsapp us

Chat with a support agent via SMS at:
+65 802 831 04

Or chat via Whatsapp at:
+65 808 736 42

Mon - Fri: 8:00 am - 5:00 pm (SGT)