JBL Vibe 200TWS
Amp up your routine with the sound you love! Get powerful, JBL Deep Bass Sound and all the freedom of true wireless for up to 20 hours with the JBL Vibe 200TWS. Take your world with you. Just a touch of the earbud manages your calls and music and puts you in touch with your voice assistant. And with dual connect you can use either earbud and save battery life. Ultra-light and comfortable, thanks to their ergonomic shape, the JBL Vibe 200TWS are fun, ready-to-use.
Product Specifications
General Specifications
| Driver size (mm) | 8 |
|---|
Audio Specifications
| Driver sensitivity at 1kHz/1mW (dB) | 108 |
|---|---|
| Dynamic frequency response range (Hz) | 20 Hz – 20 kHz |
| Impedance (ohms) | 16 |
Dimension Specifications
| Charging Case Weight (oz) | 1.4 |
|---|---|
| Earpiece Weight (oz) | 0.3 |
| Charging Case Weight (g) | 39.3 |
| Earpiece Weight (g) | 8.7 |
Control Connect Specifications
| Bluetooth version | 5.0 |
|---|---|
| Bluetooth profiles | A2DP 1.3, AVRCP 1.6, HFP 1.7 |
| Bluetooth frequency | 2.4 GHz – 2.4835 GHz |
| Bluetooth transmitted modulation | GFSK, π/4DQPSK, 8DPSK |
| Bluetooth transmitter power | 0 - 12dbm |
Documents & Downloads
Quick Start Guide
Gallery
Videos
What’s in the Box
- 1 x JBL Vibe 200TWS headphones
- 1 x USB Type-C charging cable
- 1 x 3 sizes of eartips
- 1 x Charging case
- 1 x Quick Start Guide / Safety Sheet (S / i)
- 1 x Warranty / Warning (W / !)
FAQs & How-Tos
How to Factory Reset True Wireless Stereo Earbuds
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off).
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
Was this helpful?
Thank you for your feedback!
Can’t find what you’re looking for?
Chat with Us
Mon - Fri - 8:00 a.m 5:00 p.m (SGT)
