Support Overview / Car & Marine / Car Electronics / Amplifiers / Amplifiers (mono/sub) / GTO-1001EZ
GTO-1001EZ

GTO-1001EZ

1450-Watt Mono Subwoofer Amplifier

Sold from 2012 until now

Predecessor Product: GRAND TOURING GTO 14001
Made in: China

Getting started with your GTO-1001EZ

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Series
Grand Touring
Type
Mono/Subwoofer
Maximum Current Draw
95A
Peak Power
1450W
Frequency Response
10Hz-280Hz
Number of Channels/Type
1 Channel
Signal-to-Noise Ratio
>80dB
Depth (mm)
373
Depth (in)
14-11/16
Width (mm)
246
Weight (lb)
10.8
Weight (kg)
4.9
Width (in)
9-11/16
Height (in)
2-9/16
Height (mm)
66

High-performance subwoofer power for enhanced sound on the move.

Finally, high-performance amplifiers that are easy to install and calibrate. The JBL® GTO-1001EZ subwoofer car audio amplifier provides unmatched ease of installation, configuration and calibration – processes that are necessary to produce clean, powerful sound. Whether you’re upgrading an OEM (original-equipment manufacturer) audio system or installing an aftermarket system, this amplifier offers virtually limitless applications with wired or auto-sensing turn-on – without making you fuss with adding third-party adapters or converters. These amps drive up to 15 volts of audio signal right to the inputs with either line-level or speaker-level signals. And they come with RCA-to-bare-wire adapters and a setup CD. Experience the clean and powerful output of GTO Series amplifiers in a variety of channel configurations and power ratings, all of which are CEA®-2006A compliant and backed by the JBL reputation for top quality.

The GTO1001EZ Class D mono subwoofer amplifier is rated to deliver 1000 watts RMS at 2 ohms (1450 watts max). High-efficiency Class D amplifier design ensures the most boom for the buck, all in a modestly sized chassis. It’s an impressive amount of power in an attractive, easily configured amplifier. The wide input range and low current draw make the amplifier ideal for adding a subwoofer to existing OEM or aftermarket systems.
The GTO-1001EZ subwoofer amplifier includes an input-level switch, a setup CD with test signals and LED indicators to tell you when the setting is correct. Simply set the switch, turn the input-level knob and watch for the green light that indicates that the setup is perfect. That’s all there is to it. There’s a reason why the amplifier’s model number contains EZ. This feature significantly reduces installation time and delivers excellent results.
JBL engineers have configured the GTO-1001EZ amplifier to turn on with a wired input (as in aftermarket systems) or with an auto-sensing circuit that activates whenever the amp detects an audio signal. The auto-sensing feature is helpful when you’re upgrading OEM audio systems that don’t include a remote trigger wire. It’s easily defeated by a switch when you’re using a wired remote turn-on input.
The GTO-1001EZ amplifier accepts a wide range of inputs up to 15 volts with line-level or speaker-level signals. Using RCA-to-bare-wire adapters included with the amplifier, you can connect to virtually any OEM or aftermarket audio system. The end result is an amplifier that works with the widest range of cars on the road.
An active 12-decibel/octave low-pass crossover offers variable filter points between 40Hz and 280Hz. Importantly, all filter points on the adjustment dial match the silkscreened frequency points on the amplifier chassis – a feature that not all amps provide.
The GTO-1001EZ provides a range of bass boost from 0 decibels to +12 decibels, centered at 45Hz. This is a useful feature for restoring some bass that may be limited by the low-frequency response of certain speakers in the system – or to enhance a particular range of bass that the speakers already produce well.
The high-efficiency, low-current and low-heat performance of Class D amplification ensures high power output from the GTO-1001EZ subwoofer amplifier. It also minimizes any need for upgrades to your vehicle’s electrical system.
Amplifier protection is just like insurance; you hope you’ll never need it, but it’s sure nice to have when you do. Thermal protection keeps the GTO-1001EZ amplifier from overworking itself to the point of premature failure. Low-impedance protection keeps the amplifier safe from any speaker or wiring failures that result in short circuits.
The GTO-1001EZ amplifier is compatible with the optional wired-remote bass control, which provides easy adjustment of subwoofer-channel bass levels from the front seat. The wired remote is easy to connect with a telephone-style jack and can be mounted in a variety of positions to suit the vehicle and location preferences.

Images & Videos

  • GRAND TOURING GTO 1001EZ - Black - 1-Channel Power Amplifier (1000 watts) - Hero
  • GRAND TOURING GTO 1001EZ - Black - 1-Channel Power Amplifier (1000 watts) - Hero
  • GRAND TOURING GTO 1001EZ - Black - 1-Channel Power Amplifier (1000 watts) - Front
  • GRAND TOURING GTO 1001EZ - Black - 1-Channel Power Amplifier (1000 watts) - Back
  • GRAND TOURING GTO 1001EZ - Black - 1-Channel Power Amplifier (1000 watts) - Left
  • GRAND TOURING GTO 1001EZ - Black - 1-Channel Power Amplifier (1000 watts) - Detailshot 1

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: +6566222003

Mon - Fri - 8:00 a.m 5:00 p.m (SGT)

E-mail Us

E-mail Us

365 days a year

We will respond within one business day.

Email Us
Chat with Us

Chat with Us

Mon - Fri - 8:00 a.m 5:00 p.m (SGT)

message

Text or Whatsapp us

Chat with a support agent via SMS at:
+65 802 831 04

Or chat via Whatsapp at:
+65 808 736 42

Mon - Fri: 8:00 am - 5:00 pm (SGT)