ES 150PW
10 inch Wireless Powered Subwoofer
Sold from 2008 until 2013
Predecessor Product: | PERFORMANCE P10SW |
---|---|
Successor Product: | ES 150P |
сделано в: | China |
Документы & Загрузки
Спецификации
- Finish
- Black
- Series
- ES
- Amplifier Power (RMS)
- 300 Watts
- Peak Dynamic Power
- 500 Watts (Peak Dynamic Power is measured by recording the highest center-to-peak voltage measured across the output of a resistive load equal to minimum impedance of the transducer, using a 50Hz sine wave burst, 3 cycles on, 17 cycles off)
- Subwoofer Transducer
- 10 inch (250mm) PolyPlas
- Inputs
- Wireless 2.4GHz, Line-Level, LFE
- Low-Pass Frequency
- Adjustable from 50Hz – 150Hz
- Frequency Response
- 25Hz – Low-pass crossover setting
- MSRP U.S.
- $599.95 each
- Frequency Response
- 27Hz – 150Hz
- Crossover Frequencies
- 50Hz – 150Hz; 24dB/octave, continuously variable
- Weight (kg)
- 17.7
- Height (mm)
- 457
- Width (mm)
- 337
- Weight (lb)
- 39
- Height (in)
- 18
- Depth (in)
- 16-1/8
- Depth (mm)
- 409
- Width (in)
- 13-1/4
- Weight
- Subwoofer... 39 lb (19.5kg)
- Weight
- Transmitter... 0.5 lb (0.2kg)
- Dimensions (H x W x D)
- Subwoofer... 18 inch x 13-1/4 inch x 16-1/8 inch (457mm x 337mm x 409mm)
- Dimensions (H x W x D)
- Transmtter... 3-3/4 inch x 4-7/8 inch x 3-15/16 inch (95mm x 124mm x 100mm)
- Controls
- Low Pass, ID code selector, Crossover frequency, Level, Phase
- Connections
- Line-Level input LFE Input
- Amplifier Power (Peak)
- 500W
- Amplifier Power (RMS)
- 300W
- Power Requirement
- AC 120V~60Hz 2A
- Low-Frequency Transducer
- 10" (250mm) PolyPlas™
The ES150PW WIRELESS powered subwoofer delivers all the bass impact and excitement to your home theater while making set up a snap. A 2.4GHz wireless transmitter means that those long subwoofer cables are a thing of the past allowing you to place the sub anywhere in the room. Special effects in your favorite movies are loud and clear, without unwanted distortion or boominess. A powerful amplifier delivers up to 500 watts of peak power. Convenient level and crossover-frequency controls, and a phase switch let you tailor the sub's performance to your room's acoustics. Available in a black or cherry finish with a black grille.
Lightweight, rigid 10-inch (250mm) PolyPlas™ produces uniform pistonic motion, and effortless, high impact bass. Premium components like PolyPlas and the HeatScape™ motor structure give you less distortion, less internal resonances, and the freedom to play it loud and long.
With 300 watts RMS and 500 watts of peak power, the subwoofer will knock you out. And distortion is minimized even at high volumes. It provides the ultimate in home theater and audio quality that’s up to HD video quality.
This front-firing subwoofer has the JBL® computer-optimized bass reflex port to extend deep bass response, eliminate unwanted turbulence and rattle the walls.
With a frequency response of 27Hz to 150Hz, you hear the truth and exactly what the audio professionals who created the sound intended. There’s never a change to the music mix, the timbre of voices, the original design.
Put the JBL® ES150PW anywhere that makes sense in your home theater setup. It’s magnetically shielded for placement on the floor wherever you want, including right near your TV or video display.
Subwoofers are the most difficult speakers to place perfectly to avoid peaks and dips. With the JBL® ES150PW, you have maneuvering room. And the transmitter and subwoofer each have four selectable ID codes, so there’s no interference from other devices in the room.
The speakers feature a striking, classic black finish, which complements the aesthetics of many flat-panel televisions and nearly any décor.