BAR 1000
Experience movies, music and games with sound that puts you right in the middle of the action, thanks to 880W of total output power and thunderous bass from the 10" subwoofer. The JBL Bar 1000 has MultiBeam™ and four up-firing drivers—two in the bar and two in the detachable battery-powered surround speakers—to envelop you in a sphere of Dolby Atmos® and DTS:X 3D surround sound with a wide, spacious soundstage with no need to draw extra cables. You'll never miss a word with our PureVoice technology, which makes sure the dialogue is clear even when other sounds are at their loudest. When you're ready for some music, stream your favorite playlist from AirPlay, Alexa MRM, and Chromecast built-in™ and it'll feel like the band is right there. Have a great night out without leaving your living room.
Product Specifications
General Specifications
| Model | BAR 1000 |
|---|---|
| Sound system | 7.1.4 channel |
| Power supply | 100 - 240V AC, ~ 50/60Hz |
| Networked standby power | < 2.0W |
| Operating temperature | 0°C - 45°C |
Audio Specifications
| Total speaker power output (Max @THD 1%) | 880W |
|---|---|
| Soundbar output power (Max @THD 1%) | 440W |
| Surround speaker output power (Max @THD 1%) | 2x 70W |
| Subwoofer output power (Max. @THD 1%) | 300 W |
| Soundbar transducer | 5x (46x90)mm racetrack drivers, 3x 0.75" (20mm) tweeters, 2x 2.75" (70mm) up-firing full-range drivers |
| Surround speaker transducer | 0.75" (20mm) tweeters, 2.75" (70mm) up-firing full-range drivers |
| Subwoofer transducer | 10” (260mm) |
| Frequency response | 33Hz - 20kHz (-6dB) |
| Audio inputs | 1 Optical, Bluetooth, USB (USB playback is available in US version. For other versions, USB is for Service only.) |
Dimension Specifications
| Total soundbar dimensions (W x H x D) | 1194 x 56 x 125mm / 47" x 2.2" x 4.9" |
|---|---|
| Main soundbar dimensions (W x H x D) | 884 x 56 x 125 mm / 34.8" x 2.2" x 4.9" |
| Detachable surround speaker dimensions (each) (W x H x D) | 155 x 56 x 125 mm / 6.1" x 2.2" x 4.9" |
| Subwoofer dimensions (W x H x D) | 305 x 440.4 x 305 mm / 12" x 17.3" x 12" |
| Soundbar weight | 3.7 kg / 8.2 lbs |
| Detachable surround speaker weight (each) | 1.4kg / 3.1 lbs |
| Subwoofer weight | 10 kg / 22 lbs |
| Packaging dimensions (W x H x D) | 1000 x 375 x 475 mm/ 39.4" x 14.8" x 18.7" |
| Packaging Weight | 19.4 kg / 42.7 lbs |
Control Connect Specifications
| USB port | Type A |
|---|---|
| USB rating | 5V DC, 0.5A |
| Supporting file format | MP3 |
| MP3 codec | MPEG 1 Layer 2/3, MPEG 2 Layer 3, MPEG 2.5 Layer 3 |
| MP3 sampling rate | 16 - 48 kHz |
| MP3 bitrate | 80 - 320 kpbs |
| Bluetooth version | 5.0 |
| Bluetooth profile | A2DP 1.2, AVRCP 1.5 |
| Bluetooth transmitter frequency range | 2400MHz – 2483.5MHz |
| Bluetooth transmitter power | <15dBm (EIRP) |
| Wi-Fi network | IEEE 802.11 a/b/g/n/ac/ax (2.4GHz/5GHz) |
| 2.4G Wi-Fi transmitter frequency range | 2412 - 2472MHz (2.4GHz ISM Band, USA 11 Channels, Europe and others 13 channels) |
| 2.4G Wi-Fi transmitter power | < 20dBm (EIRP) |
| 5G Wi-Fi transmitter frequency range | 5.15 - 5.35GHz, 5.470-5.725GHz, 5.725 - 5.825GHz |
| 5G Wi-Fi transmitter power | 5.15-5.25GHz <23dBm, 5.25-5.35GHz & 5.47-5.725GHz <20dBm, 5.725-5.825GHz <14dBm (EIRP) |
| 2.4G wireless frequency range | 2406 - 2474MHz |
| 2.4G wireless power | ＜10dBm (EIRP） |
Documents & Downloads
Spec Sheets
Manuals
Quick Start Guide
Other
Declaration of Conformity
Firmware update for JBL Bar 800 and JBL Bar 1000 Version 22.34.55.80.00 (Global, Excluding China)
JBL Bar 1000 Tech Backgrounder
Firmware update for JBL Bar 800 and JBL Bar 1000 Hotfix Version 22.43.61.80.00 (Japan only)
Firmware update for JBL Bar 1000 Hotfix Version 23.05.43.80.00 (Japan only)
Firmware update for JBL Bar 800, Bar 1000 and Bar 1300 OTA1 Version 23.16.21.80.00
Gallery
Videos
What’s in the Box
- 1x Main soundbar
- 2x Detachable wireless surround speakers
- 1x Wireless subwoofer
- Remote control with 2 x batteries
- Power cords (up to 8pcs depending on region SKUs)
- 1 x HDMI cable
- 2 x L-shape wall-mount bracket (main bar) + 2 x U-shape wall-mount bracket (for surround speakers) kit with screws
- 4 x Side caps
- Quick start guide
- Safety instruction and Warranty card
- Wall mount template
FAQs & How-Tos
How to save your favorite music to the My Moments feature
(1) Use JBL One App to set up the My Moment Feature.
(2) Select the JBL soundbar you want to set your favorite music to the My Moment feature.
(3) Tap the My Moment card to assign music.
(4) Click Add Music to manage music streaming services and specific music tracks.
(5) Set the timer to inactive speaker/soundbar (optional)
(6) Set the music loudness (optional)
(7) Press SAVE
(2) Select the JBL soundbar you want to set your favorite music to the My Moment feature.
(3) Tap the My Moment card to assign music.
(4) Click Add Music to manage music streaming services and specific music tracks.
(5) Set the timer to inactive speaker/soundbar (optional)
(6) Set the music loudness (optional)
(7) Press SAVE
Was this helpful?
Thank you for your feedback!
Can I create my own custom equalization settings?
Yes!
By using the JBL ONE app, you can change the equalization settings of the soundbar to fit your personal taste by adjusting the settings of each frequency to create your personalized EQ:
By using the JBL ONE app, you can change the equalization settings of the soundbar to fit your personal taste by adjusting the settings of each frequency to create your personalized EQ:
- BASS: Adjust the lower frequency sounds, such as bass or a kick drum.
- MID: Adjust the mid-frequency sounds, such as human speech.
- TREBLE: Adjust the higher frequency sounds for clarity.
Was this helpful?
Thank you for your feedback!
What does the Auto-Off function in the Music streaming App menu do?
It is a feature that allows you to set a timer to turn off the device automatically.
For example, you can set it to "never" or 15, 30, 45, and 60 mins.
For example, you can set it to "never" or 15, 30, 45, and 60 mins.
Was this helpful?
Thank you for your feedback!
How can I get further technical service?
In the JBL ONE App:
(1) Go to My Products, select your product
(2) Select Support tile
(3) Under General, select Product Support
(1) Go to My Products, select your product
(2) Select Support tile
(3) Under General, select Product Support
Was this helpful?
Thank you for your feedback!
My Soundbar is not found during setup. How do I solve that?
- Ensure that your JBL One app device is less than 10m/33ft from the soundbar during the initial set-up.
- Ensure your JBL soundbar is plugged into power and the power LED is illuminated on the BAR.
- Unplug the power cord, wait 10 seconds, reconnect the power cord and allow the speaker to power up.
- Temporarily relocate either the BAR or router so that they are closer together. If the connection succeeds, the original location may be too far from the router to maintain a stable connection.
- Try using a different device with the JBL ONE app installed and connected to your home network.
Was this helpful?
Thank you for your feedback!
Can I use the soundbar without the App?
Yes, however, the JBL ONE App gives you another level of control over the soundbar.
Through the App, you can personalize the soundbar's performance, such as:
Through the App, you can personalize the soundbar's performance, such as:
- Customizing EQ settings
- Setting up our new feature called: My Moment
- Connect your favorite streaming music services.
Was this helpful?
Thank you for your feedback!
What is Dolby Atmos and what does it do?
Dolby Atmos is a 3D surround sound format.
Using Dolby Atmos, the soundbar can reproduce multi-channel surround sound, including a virtual height channel.
Note: This feature only applies to Dolby Audio content.
For more information, visit Dolby Atmos at https://www.dolby.com/technologies/dolby-atmos.
Using Dolby Atmos, the soundbar can reproduce multi-channel surround sound, including a virtual height channel.
Note: This feature only applies to Dolby Audio content.
For more information, visit Dolby Atmos at https://www.dolby.com/technologies/dolby-atmos.
Was this helpful?
Thank you for your feedback!
What does the Audio Sync function do?
Sometimes, when the soundbar is connected to a digital TV, the audio may not synchronize with the video. If the video is behind the audio, adjust the audio delay time to match the video.
You can set the audio delay time between 0 msec and 250 msec.
Note: The audio delay time you specify may not be exact, depending on the played content.
The audio sync function will not resolve instances where the video is ahead of the audio.
You can set the audio delay time between 0 msec and 250 msec.
Note: The audio delay time you specify may not be exact, depending on the played content.
The audio sync function will not resolve instances where the video is ahead of the audio.
Was this helpful?
Thank you for your feedback!
How do I fix AirPlay not streaming music to my soundbar?
If you cannot stream music with AirPlay, use the JBL One App;
(1) Go to Settings.
(2) Select 3rd Party Service.
(3) Select the Airplay tile.
(4) Select Reset AirPlay.
(1) Go to Settings.
(2) Select 3rd Party Service.
(3) Select the Airplay tile.
(4) Select Reset AirPlay.
Was this helpful?
Thank you for your feedback!
What does the Moment button do?
It is a personalization feature that allows you to customize your favorite music track, auto-off timing, and music volume.
Once set up, you can directly access it through the remote control or within the JBL ONE App.
Once set up, you can directly access it through the remote control or within the JBL ONE App.
Was this helpful?
Thank you for your feedback!
How do I rename my device?
(1) Select the JBL soundbar you want to rename
(2) Navigate to the Support tile and select "Rename My Product."
(3) Press the current name and type in the new name
(4) Press SAVE
(2) Navigate to the Support tile and select "Rename My Product."
(3) Press the current name and type in the new name
(4) Press SAVE
Was this helpful?
Thank you for your feedback!
How can I get a software update?
Once the sound bar is connected to the network, software updates will automatically be sent to the speaker/soundbar through Wi-Fi or the internet, if available
Was this helpful?
Thank you for your feedback!
What does the Sound Calibration function do?
The calibration sound setup process ensures the soundbar delivers the best 3D surround effects for any interior and room layout.
Was this helpful?
Thank you for your feedback!
How to reconnect the subwoofer
(1) On the subwoofer's rear panel, press and hold the pairing button until the LED turns fast, flashing white.
(2) To enter the subwoofer pairing mode on the soundbar, press and hold the bass button on the remote control for more than three seconds. Then, press VOL - on the remote control.
On the soundbar LED display:
→ "SUB PAIRING": The subwoofer is ready for pairing.
→ "SUB PAIRED": The subwoofer is connected.
(2) To enter the subwoofer pairing mode on the soundbar, press and hold the bass button on the remote control for more than three seconds. Then, press VOL - on the remote control.
On the soundbar LED display:
→ "SUB PAIRING": The subwoofer is ready for pairing.
→ "SUB PAIRED": The subwoofer is connected.
Was this helpful?
Thank you for your feedback!
When using the JBL One app to set up my speaker, my Wi-Fi network is not appearing in the list. How can I connect to my Wi-Fi network?
You can manually type in the network name (SSID) and password to connect if the network does not appear.
Was this helpful?
Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call us now at:
+632 8 865 2317
Globe: +63 917 849 7697
Smart: +63 998 542 0234
Mon - Fri - 8:00 a.m 5:00 p.m (PHT)
Chat with Us
Mon - Fri - 8:00 a.m 5:00 p.m (PHT)
