SoundBars
-
My JBL SB250 should turn on automatically when receiving an audio signal at either input, according to the owner's manual. However, this does not happen.We are sorry about this problem. EuP regulations require that electronics go into full off after some time. Unfortunately, this means that the soundbar cannot be woken up again after half an hour. It is necessary to use the ON/OFF switch.Was this helpful? Thank you for your feedback!There is an upgrade socket on the back panel. How is this socket used, and which kind of cable must I buy to use it?Although the owner's manual states that owner can use this connector for home upgrade procedure, this is not so. The USB-connector used cannot be bought in commercially available cables, and the port must be considered for technician's use only.Was this helpful? Thank you for your feedback! -
-
-
How does Harman Volume work on JBL Cinema Base?Harman Volume on the Cinema Base has no levels, it's either on or off. It will remember the last setting when it's powered on. When you enable Harman Volume, you will hear audio feedback ( 4 tones going up when you turn it on, and 4 tones going down when you turn it off ) There is no visual indication that shows if it's on or offWas this helpful? Thank you for your feedback!
Further Support
Watch & Learn
Have you seen our Youtube channel?
Many of our products have videos introducing them.
Learn moreCan’t find what you’re looking for?
Call Us
Talk to a product expert
Call us now at:
+632 8 865 2317
Globe: +63 917 849 7697
Smart: +63 998 542 0234
Mon - Fri - 8:00 a.m 5:00 p.m (PHT)
Chat with Us
Mon - Fri - 8:00 a.m 5:00 p.m (PHT)
