Getting started with your JBL Xtreme
Documents & Downloads
Product Specifications
- Output power (W)
- 2 x 20
- Signal-to-Noise Ratio
- 80 dB
- Frequency Response
- 70Hz – 20kHz
- Dimensions (cm)
- 12.6 x 28.3 x 12.2
- Dimensions (in)
- 4.96 x 11.14 x 4.8
- Weight (kgs)
- 2.11
- Weight (lbs)
- 4.65
- Bluetooth version
- 4.1
- Battery capacity (mAh)
- 10,000
- Charging time (hrs)
- 3.5
- Maximum music playing time (hrs)
- 15
- 3.5 mm audio cable Input
- Yes
- Auto-power off
- Yes
- Bluetooth
- Yes
- JBL Connect
- Yes
- Powerbank
- Yes
- Speakerphone
- Yes
- Splashproof
- Yes
- Wireless
- Yes
- Transducer
- Woofer 2 x 63 mm
Powerful sound, now transportable
JBL Xtreme is the ultimate portable Bluetooth speaker that effortlessly delivers earth-shaking, powerful stereo sound by incorporating four active transducers and two visible JBL Bass Radiators. Packing a massive rechargeable 10,000mAh Li-ion battery that supports up to 15 hours of playtime and dual USB charge out, this speaker easily keeps your music and your devices going for as long as you need them to. You can trust JBL Xtreme to bring the excitement wherever you need it – whether indoors or outdoors, poolside party or backyard barbeque – with its splashproof fabric design that’s available in black, blue, or red. It also features a noise and echo cancelling speakerphone for clear conference calls, and JBL Connect that can wirelessly link multiple JBL Connect enabled speakers together to amplify the listening experience.
FAQs & How-Tos
-
No, for now it is only possible to connect two speakers together using the JBL connect feature. Newer JBL products feature JBL Connect+, which allows you to connect > 100 devices simultaneously, these however are not compatible with older JBL products featuring JBL ConnectWas this helpful? Thank you for your feedback!
-
No, JBL Flip 4 can wirelessly link with JBL Connect+ compatible speakers only. Currently, the Flip 4, Pulse 3 and Charge 3 ( after a firmware upgrade ) have the JBL Connect+ featureWas this helpful? Thank you for your feedback!
-
The JBL Xtreme will no longer appear in the JBL Portable app while using Apple devices with iOS 14 or later installed, due to incompatibility.
You can continue to use the speaker as normal with these devices through Bluetooth or Aux connection, but it will no longer appear in the app.
There are currently no plans to release a new Firmware as the JBL Xtreme has been discontinued.Was this helpful? Thank you for your feedback! -
It is possible to rename the Bluetooth name of the primary connected device and set the Party or Stereo mode. If a firmware upgrade is available for any Connect, Connect+, or Partyboost compatible speaker, this can be installed through the JBL Portable app. Only identical products can be set to stereo mode. Please note that, even though you can pair a Boost TV with JBL Connect, you cannot control this from the JBL Connect AppWas this helpful? Thank you for your feedback!
-
With the speaker ON, press and hold the VOL+ and Pause/Play buttons for 5-6 seconds. The Xtreme shuts down, and is now reset. You will need to 'forget' the speaker in Bluetooth settings on your phone/tablet in order to pair it again.Was this helpful? Thank you for your feedback!
-
JBL Xtreme, JBL Pulse 2, JBL Charge3, JBL Flip 3, Pulse 3, and Flip 4 Android, Google Now, Google Play are trademarks of Google Inc. Siri, iTunes, and Apple Music are trademarks of Apple Inc. Spotify is a registered trademark of Spotify AB. IOS is a registered trademark of Cisco in the US and is used by Apple under license.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call us now at:
+632 8 849 9325
Globe: +63 917 849 7697
Smart: +63 998 542 0234
Mon - Fri - 8:00 a.m 5:00 p.m (PHT)
Chat with Us
Mon - Fri - 8:00 a.m 5:00 p.m (PHT)