UA Sport Wireless Train – Engineered by JBL®
Wireless on-ear headphone built for the gym
Sold from 2018 until now
Getting started with your UA Sport Wireless Train – Engineered by JBL®
Documents & Downloads
Product Specifications
- Driver size (mm)
- 40
- Ear cushion material
- UA breathe material
- Driver sensitivity at 1kHz/1mW (dB)
- 101
- Dynamic frequency response range (Hz)
- 16Hz - 20kHz
- Impedance (ohms)
- 32
- Number of drivers per ear
- 1
- Headphone cable length (cm)
- 125.0
- Headphone cable length (ft)
- 4.1
- Weight (g)
- 240.0
- Weight (oz)
- 8.5
- Bluetooth profiles
- A2DP v1.3, AVRCP v1.5, HFP v1.6, HSP v1.2
- Bluetooth frequency
- 2.402GHz-2.48GHz
- Bluetooth transmitted modulation
- GFSK,π/4DQPSK, 8DPSK
- Bluetooth transmitter power
- <4 dbm
- Bluetooth version
- 4.1
- Charging time (hours from empty)
- 2
- Maximum music play time with ANC off (hours)
- 16
- Maximum play time (hours)
- 16
- Maximum talk time (hours)
- 16
- Bluetooth
- Yes
- Ambient Aware
- Yes
- Built-in Microphone
- Yes
- Carrying case
- Yes
- Detachable Cable
- Yes
- Flat-fold design
- Yes
- Hands Free Call
- Yes
- JBL Charged Sound
- Yes
- On-ear
- Yes
- Rechargable battery
- Yes
- Controls on Ear Cups?
- Yes
- Siri/ Google Now
- Yes
- Speed charge
- Yes
- Sweat Proof
- Yes
- TalkThru
- Yes
- Wireless
- Yes
Built for the Athlete.
UA Sport Wireless Train are built for the gym. SuperVent ear cushions keep them cool and dry while Under Armour grip material provides a soft feel and maximum stability. UA Train headphones elevate every rep with big, wireless JBL Charged Sound. With a simple touch of the UA logo, TalkThru technology is enabled so you can talk to your training partner or coach without having to remove the headphones. Oversized controls are easy to access during an intense training session and a 16-hour (maximum) battery with Speed Charge delivers up to an hour of playback on just five minutes’ charge. Tested and designed by athletes for durability, they’re moisture resistant and the ear cushions are hand washable. With UA Sport Wireless Train, you can get the most out of your workout.
FAQs & How-Tos
-
UA Train features an IPX4 rating which offers protection from a splash of water in any direction for at least 5 minutes. They cannot be fully submerged in water.Was this helpful? Thank you for your feedback!
-
Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up for 2-3 seconds and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a solid blue light above the power button.Was this helpful? Thank you for your feedback!
-
Yes. The UA Train features a detachable audio cable with a one button remote. (Please note: you cannot use bluetooth or TalkThru when using the cable connection.)Was this helpful? Thank you for your feedback!
-
No. UA Train does not support AptX™ and AptX HD™ audio codecs.Was this helpful? Thank you for your feedback!
-
As the headphones are charging, you will see a red solid light indicator at the bottom LEFT ear cup. Once the unit is fully charged, the red light will turn off.Was this helpful? Thank you for your feedback!
-
Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up for 2-3 seconds and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a solid blue light above the power button.Was this helpful? Thank you for your feedback!
-
Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up for 2-3 seconds and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a solid blue light above the power button.Was this helpful? Thank you for your feedback!
-
To receive a call, press the center button located in between the volume- and volume+ button for 1 second.Was this helpful? Thank you for your feedback!
-
To use the headphones, they cannot be charging. You should receive 16 hours of battery life. The UA Train also features the quick charge battery which allows you to receive 1 hour of battery life after charging for 5 min.Was this helpful? Thank you for your feedback!
-
Yes, The UA Train ear cushions can be removed and washed. To remove the ear cushions, peel cushion away from ear cup center. Hand wash the ear cushions only with liquid soap for 5 minutes. Swish in soapy water, then swish through clean water until there are no more soap suds. Wait for ear cushions to fully dry, and gently stretch the cushion, inserting the cushion ring into the ear cup slot, and working your way around. Rotate until the L or R indicator is in the correct position.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call us now at:
+632 8 849 9325
Globe: +63 917 849 7697
Smart: +63 998 542 0234
Mon - Fri - 8:00 a.m 5:00 p.m (PHT)
Chat with Us
Mon - Fri - 8:00 a.m 5:00 p.m (PHT)