


JBL Endurance JUMP
Product Specifications
General Specifications
Driver size (mm) | 10.0 |
---|
Audio Specifications
Driver sensitivity at 1kHz/1mW (dB) | -20dB |
---|---|
Dynamic frequency response range (Hz) | 20Hz–20kHz |
Impedance (ohms) | 16.0 |
Number of drivers per ear | 1.0 |
Control Connect Specifications
Bluetooth version | 4.2 |
---|---|
Bluetooth profiles | HFP v1.6, A2DP v1.3, AVRCP v1.5 |
Bluetooth frequency | 2.402GHz-2.48GHz |
Bluetooth transmitted modulation | GFSK, π/4DQPSK,8DPSK |
Bluetooth transmitter power | 4 dbm |
Documents & Downloads
Spec Sheets
Quick Start Guide
Gallery







Videos
What’s in the Box
- 1 x Headphones
- 1 x Charging cable
- 3 x Sizes of ear tips
- 1 x Enhancer
- 1 x Sport Carry Pouch
- 1 x Safety Sheet / Quick start guide
- 1 x Warranty / Warning

FAQs & How-Tos
The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:
• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.
• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device
Always get the latest driver version available for your Computer/PC/Laptop.
To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.
The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
This unit is IPX7 rated, which means that you can submerge the unit in water as deep as 3 feet (1 meter) for up to 30 minutes.

For all models except Endurance Peak:
Press the headphone touch control located on the RIGHT ear loop for 15 seconds while the headphones are being charged.
Note that resetting the Dive will not erase music contained in the MP3 memory.
Endurance Peak reset: While the pods are being charged, tap the touch pad on the right pod once, then tap again and hold for approx 18 seconds, or until the LED blinks.
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call us now at:
+632 8 865 2317
Globe: +63 917 849 7697
Smart: +63 998 542 0234
Mon - Fri - 8:00 a.m 5:00 p.m (PHT)
Chat with Us
Mon - Fri - 8:00 a.m 5:00 p.m (PHT)