.jpg?sw=72&sh=72&sm=fit&sfrm=png "SCL-8 - Black - 2-Way 5.25-inch (130mm) In-Ceiling Loudspeaker - Hero")
.png?sw=550&sh=550&sm=fit&sfrm=png "SCL-8 - Black - 2-Way 5.25-inch (130mm) In-Ceiling Loudspeaker - Hero")
SCL-8
The SCL-8 is the most compact round in-ceiling model in the JBL Synthesis Custom Loudspeaker (SCL) series. It is designed for use as a height channel or in-ceiling LCR or surround channel loudspeaker. The SCL-8 features JBL’s patented 2410H-2 1-inch (25mm) compression driver mated to an offset High Definition Imaging (HDI™) horn. This patented horn design is integrated with an angled 5.25-inch (130mm) Advanced Aluminum Matrix cone cast-frame woofer operating behind an acoustic aperture waveguide. The innovative configuration yields incredibly smooth and consistent performance for off-axis placement up to 60 degrees from the listening position. The SCL-8 is acoustically designed to match any of the JBL Synthesis Custom Loudspeakers (SCL series) as part of a complete JBL Synthesis immersive audio solution. It is ideal for use in small to medium rooms.
Especificaciones del producto
Especificaciones generales
| Type | 2-Way In-ceiling loudspeaker |
|---|---|
| Low Frequency Driver | 5.25” (130 mm) advanced Aluminum Matrix cone cast-frame woofer (JW130Al-4) |
| High Frequency Driver | 1" (25 mm) 2410H-2 Teonex annular ring-diaphragm compression driver |
| Recommended Amplifier Power | 25 - 100 W RMS |
| Impedance | 4 Ohm |
| Loudspeaker Sensitivity | 85 dB/2.83V/1m (2pi anechoic) |
| Frequency Response | 55 Hz - 30 kHz (-6 dB on-axis), 2pi anechoic |
| Crossover Frequency | 1.8 kHz |
| High Frequency Coverage Angle (-6dB) | 60° Vertical (Up |
| Enclosure Type | Open back |
| Controls | Boundary Proximity Control |
| Warranty | 5 Years |
| Shipping Units of Measure | Each |
| Grill Dimensions (Square) | 10.77” (273 mm) x 10.77” (273 mm) |
| Grille Dimensions (Round) | 10.77” (273 mm) Diameter |
| Product Dimensions (with grille) | 10.77” H x 10.77” W x 4.73” D (273 mm x 273 mm x 120 mm) |
| Cut-out Diameter | 9.72” (247 mm) |
| Accessory Rough-in Bracket | CB8 |
| Mounting Depth | 4.54” (115 mm) |
| Input Type | Gold-plated spring-loaded binding posts |
| Product Weight | 7.8 lb. (3.5 kg) |
| Shipping Weight | 10.6 lb. (4.8 kg) |
Documentos y descargas
Fichas de especificaciones
Manuales
Guía de inicio rápido
Software
Galería
¿No encuentras lo que buscas?
Contacte con Nosotros
Live Chat (ícono en la esquina inferior derecha)
Horario de Atención
De Lunes a Viernes: 08:00 a.m a 6:00 p.m
Sábados: 09:00 a.m a 12:00 p.m
