SCL-5
The SCL-5 is the highest performance traditional round in-ceiling model in the JBL Synthesis Custom Loudspeaker (SCL) series. It is designed for use as a height channel or in-ceiling LCR or surround channel loudspeaker. The SCL-5 features JBL’s patented 2409H 1-inch (25mm) compression driver mated to an offset High Definition Imaging (HDI™) horn. This patented horn design is integrated with an angled 7-inch (180mm) Advanced Aluminum Matrix cone cast-frame woofer operating behind an acoustic aperture waveguide. The innovative configuration yields incredibly smooth and consistent performance for off-axis placement up to 60 degrees from the listening position. The SCL-5 is acoustically designed to match any of the JBL Synthesis Custom Loudspeakers (SCL series) as part of a complete JBL Synthesis immersive audio solution. It is ideal for use in medium to large rooms.
Especificaciones del producto
Especificaciones generales
| Type | 2-Way In-ceiling loudspeaker |
|---|---|
| Low Frequency Driver | 7” (180 mm) advanced Aluminum Matrix cone cast-frame woofer (JW180PB-6) |
| High Frequency Driver | 1" (25 mm) 2409H Teonex annular ring-diaphragm compression driver |
| Recommended Amplifier Power | 25 – 125W RMS |
| Impedance | 6 Ohm |
| Loudspeaker Sensitivity | 86 dB/2.83V/1m (2pi anechoic) |
| Frequency Response | 48Hz - 32kHz (-6 dB on-axis), 2pi anechoic |
| Crossover Frequency | 1575 Hz |
| High Frequency Coverage Angle (-6 dB) | 60-degree Vertical (Up |
| Enclosure Type | Open back |
| Controls | Boundary Proximity Control |
| Grille Dimensions | Round - 12.5" (318 mm) diam. |
| Grille Dimensions | Square - 12.5" (318 mm) x 12.5" (318 mm) |
| Product Dimensions (with grille) | 12.5" H x 12.5" W x 5.98" D (318 mm x 318 mm x 151.9 mm) |
| Cut-out Diameter | 11.2" (285 mm) |
| Accessory Rough-in Bracket | CB10 |
| Mounting Depth | 5.58" (141.8 mm) |
| Input Type | Gold-plated spring-loaded binding posts |
| Product Weight | 8.6 lb. (3.9 kg), 9.2 lb. (4.2 kg) with one grille |
| Shipping Weight | 12.5 lb. (5.7 kg) |
| Shipping Units of Measure | Each |
| Warranty | 5 Years |
Especificaciones de sonido
| 2-way in-ceiling loudspeaker system | |
|---|---|
| 6.5-inch (165mm) Cast-frame, advanced aluminum matrix Cone with low-distortion neodymium motor structure | |
| D2-derived 1-inch / 25mm D2409H annular ring, Teonex® diaphragm compression driver | |
| High-Definition Imaging (HDI™) waveguide | |
| Retractable Cat Claws mounting system for easy installation | |
| Hi Frequency Level and Boundary Compensation switches | |
| Rotatable, angled baffle | |
| Metal back can be integrated with system | |
| Sealed / acoustic suspension design | |
| Gold plated, spring-loaded, push type binding post terminals | |
| Zero-bezel, magnetically attached round and square grilles |
Documentos y descargas
Fichas de especificaciones
Manuales
Guía de inicio rápido
Software
Galería
¿No encuentras lo que buscas?
Contacte con Nosotros
Live Chat (ícono en la esquina inferior derecha)
Horario de Atención
De Lunes a Viernes: 08:00 a.m a 6:00 p.m
Sábados: 09:00 a.m a 12:00 p.m
