|Mounting Depth||3-13/16" (97mm)|
|Compatible Wall Material Thickness||0.5" – 2.0" (130mm – 250mm)|
|Shipping Units of Measure||Each|
|Pre-Construction Bracket Part number||PCK8|
|Back Box Part Number||FBB8|
|Recommended Amplifier Power||100W|
|Frequency Response||30Hz - 20kHz|
|Loudspeaker Sensitivity:88dB 2.83V @ 1m|
|Low Frequency Driver Size and Material||8" (203mm) Polycellulose Woofer|
|High Frequency Driver Size and Material||1" (25mm) Silk-Dome Tweeter|
|Cutout Dimensions||(H x W)|
|Grille Finished Dimensions||(H x W)|
Documents & Downloads
What’s in the Box
- Main Unit
- Magnetic Grill
- Owners Manual
- Printed Mounting Template
- Warranty Card
FAQs & How-Tos
Can I use an in-ceiling speaker as an in-wall unit or vice versa?
No, in-ceiling speakers cannot be used in the wall due to speaker dimensions. A wall is not deep enough to accommodate the depth of an in-ceiling speaker. For in-wall speakers, you can install them in the ceilings without any depth issues. However, for quality listening, we recommend using architectural speakers according to their intended purpose.
What works better for stereo listening, in-wall or in-ceiling speaker?
In-wall speakers will work better for stereo listening because the speaker will be facing directly at you instead of above you. Note: Stereo imaging requires the listening position (“sweet spot”) to be dead center, equal distance, from the front left and right speakers.
Which is superior, in-wall/in-ceiling speaker(s) with or without a back-box?
All of our in-wall/in-ceiling speakers are designed to be used in a wall without the need for a back-box. The specs provided are based on no back-box. However, when adding a back-box (really only possible when doing new construction), you will improve the low frequency response a bit, getting a tighter bass response.