JBL PartyBox On-the-Go Essential
Portable party speaker with built-in lights and wireless mic
Sold from 2023 until now
Predecessor Product: | JBL PartyBox On-The-Go |
---|
Getting started with your JBL PartyBox On-the-Go Essential
Documents & Downloads
Product Specifications
- Output power (W)
- 100
- Dynamic frequency response range (Hz)
- 50 Hz - 20 kHz (-6dB)
- Dimensions (cm)
- 49.0 x 24.4 x 22.9
- Dimensions (in)
- 19.3 x 9.6 x 9.0
- Weight (kgs)
- 6.1
- Weight (lbs)
- 13.4
- Bluetooth profiles
- A2DP V1.3, AVRCP V1.6
- Bluetooth frequency
- 2.4 GHz - 2.4835 GHz
- Bluetooth transmitted modulation
- GFSK, π/4 DQPSK, 8DPSK
- Bluetooth transmitter power
- ≤ 10 dBm (EIRP)
- Bluetooth version
- 4.2
- Maximum music playing time (hrs)
- 6
- JBL Original Pro Sound
- Yes
- Built-in Microphone
- Yes
- Bluetooth
- Yes
- Lightshow
- Yes
- Splashproof
- Yes
- Rechargable battery
- Yes
- True Wireless
- Yes
- IP Code
- IPx4
Take your party anywhere
From beach parties to festivals, the JBL PartyBox On-The-Go Essential lets you see, hear and feel the beat. Turn it up loud with 100 watts of powerful JBL Pro Sound, synched to a dazzling light show. Access your favorite tunes with Bluetooth, USB, AUX and TWS (True Wireless Stereo) connectivity, grab a friend and sing your hearts out with the JBL wireless mics, or use the guitar input to play along. With a bottle opener, padded shoulder strap, rechargeable battery and IPX4 splash-proof protection, the JBL PartyBox On-The-Go Essential has everything you need to get the party started—and take it with you.
FAQs & How-Tos
-
Resetting the Partybox to Factory Settings
- Press and hold "Play/Pause" and "Volume +" down for > 10 seconds.
- The JBL Partybox will power off and back on and is now reset.
Was this helpful? Thank you for your feedback! -
This model is not supported by the JBL Partybox App.Was this helpful? Thank you for your feedback!
-
It is possible to pair two of the same model of JBL PartyBox speakers together through TWS (True Wireless Stereo) mode.
PartyBox On-The-Go/100:
Connect just the left PartyBox with the chosen device first, with the right PartyBox turned off. The speaker that is connected first will automatically be the left channel. Now turn the right PartyBox on and continue with TWS pairing (detailed below).
PartyBox 200/300/1000:
A button (L/R) on the rear of the speakers is used to assign the correct channel to the speakers after pairing is made.
In order to activate TWS mode, press and hold the Bluetooth button on the first speaker until the notification chime sounds, about 5 seconds. Then press and hold the Bluetooth button on the second speaker until the notification chime sounds (as seen below). TWS mode is now activated. To disable TWS, press and hold the Bluetooth button on either speaker, or power off one speaker.
Partybox 110/310/710/Encore/Essential:
Press the buttons labelled TWS on both speakers to connect the speakers in TWS mode (pictured in item 2 in the image below, with two speakers on the button).
TWS can be activated and deactivated remotely in the JBL Partybox app, in addition to assigning the left and right channels to the correct speakers.
Once the TWS connection is setup, it will be in Stereo mode by default if both speakers are the same model, otherwise the speakers will be in Party mode by default if different Partybox models are used. You can also switch between Stereo and Party mode in the JBL PartyBox app if two of the same Partybox models are used.
Please note: In order to achieve TWS mode, the speaker must be the same model with the exception of the PartyBox 200 and PartyBox 300 which can be paired together via TWS. You cannot achieve TWS with a PartyBox 1000 and a PartyBox 300. You cannot achieve TWS with a PartyBox 100 and PartyBox 200. However, it is possible to connect a maximum of two of either the Partybox 110, 310, 710 or Encore/Essential together in Party mode - the two speakers then do not need to be the same model, but Stereo mode will not be possible.Was this helpful? Thank you for your feedback! -
You can connect two of the same Partybox models (e.g. 2 x Partybox 310, or 2 x Partybox 100) together in TWS Mode by pressing and holding the Bluetooth button on both speakers for 5 seconds, or by pressing the dedicated TWS buttons on the rear panels of both speakers on the Partybox 110, 310 and 710. It is possible to pair two different Partybox models together using a wired connection (e.g. 1 x Partybox 310 and 1 x Partybox 100). It is also possible to pair two Partybox different models wirelessly in Party mode, however this is only possible with the newer Partybox models - the Partybox 110, 310 and 710. The Partybox 200 & 300 can be paired in TWS mode as they are the same model apart from the presence of a battery in the Partybox 300. If you connect an instrument or microphone to one Partybox speaker while using TWS, the instrument or microphone connected to one speaker will be reproduced by this speaker alone. You will not hear the instrument or microphone in both speakers. If it is necessary to have instruments reproduced by two or more PartyBox speakers, it is possible to use an RCA or aux cable – connected from the RCA, aux or daisy chain outputs on the speaker that the instrument or microphone is connected to, wired to the RCA, aux or daisy chain input of the secondary speaker. Alternatively a small mixing console can be used - connecting audio sources to this mixer and sending the mixed audio signal to the speakers with a wired connection.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with Us
Mon - Fri - 10:00 a.m 7:00 p.m (NZST)