How To
How To
448 results
-
The only difference between the 500 and 700 series is that the 700 model provides you with a charging case. The features and functionality on the actual headphones themselves are the same.Was this helpful? Thank you for your feedback!
-
The physical battery in Boombox has a capacity of 10.000mAh @7.4V. This is the charged battery storage. When outputting ( so power from the battery is drawn ), it's using 3.7V, half the storage voltage, which will give you 74Wh - equivalent to a 20.000mAh battery with power stored at 3.7V.Was this helpful? Thank you for your feedback!
-
The difference is the BTA unit, which is a Bluetooth transmitter. The Soundgear BTA comes with the BTA unit in the box. The Soundgear does not. The BTA can be connected (with a signal cable) to a TV set, a CD player, or any other stereo line-level source, and can then stream this signal to the Soundgear wirelessly, via Bluetooth. TV sound or game sound are possible, since the BTA and the Soundgear use aptX Low Latency, which reduces the audio delay to levels, where picture and sound will be closely synchronized. This is also the secret behind the option to connect two Soundgears to one BTA unit, for two people to share a TV transmission, or a video game. Actually, you can use the BTA to stream to most other Bluetooth headphones and loudspeakers, but only if these devices also support aptX LL will the delay be low enough for video use.Was this helpful? Thank you for your feedback!
-
You'll have all the benefits from HDMI 2.0, but with 2.0a you will also have HDR (High Dynamic Range). Don't confuse HDR with cameras, this is used for TV's that support HDR content. In short, if a Blu-Ray supports HDR, it can enhanced dark scenes from a movie with this option.Was this helpful? Thank you for your feedback!
-
Dolby Atmos is a 3D surround sound format.
Using Dolby Atmos, the soundbar can reproduce multi-channel surround sound, including a virtual height channel.
Note: This feature only applies to Dolby Audio content.
For more information, visit Dolby Atmos at https://www.dolby.com/technologies/dolby-atmos.Was this helpful? Thank you for your feedback! -
JBL Connect+ can wirelessly link more than 100 JBL Connect+ enabled speakers together to amplify the partyWas this helpful? Thank you for your feedback!
-
All speakers are set to react when you use the keywords to interact with Google. To eliminate multiple speakers talking at the same time, using the "Microphone Mute" button will stop the speaker from reacting to the keywords.Was this helpful? Thank you for your feedback!
-
You can adjust equalizer, RGB LED effects, calibrate Quantum ONE headtracking, change microphone settings and update the headset's firmware.Was this helpful? Thank you for your feedback!
-
Power button, no light: Product is OFF. Power button, constant light: Product is ON. Power button: constant white, when no Bluetooth device connected. Power button, flashing blue in Bluetooth pairing mode. Power button, constant blue light: Bluetooth connected. Battery indicator LEDs: Five LEDs show battery level. When charging, the blinking LED shows how far charging has progressed. When fully charged, the LED lights will turn off. JBL Connect button flashes white in connection mode. When connected: constant light.Was this helpful? Thank you for your feedback!
-
The calibration sound setup process ensures the soundbar delivers the best 3D surround effects for any interior and room layout.Was this helpful? Thank you for your feedback!
-
It is a personalization feature that allows you to customize your favorite music track, auto-off timing, and music volume.
Once set up, you can directly access it through the remote control or within the JBL ONE App.Was this helpful? Thank you for your feedback! -
Sometimes, when the soundbar is connected to a digital TV, the audio may not synchronize with the video. If the video is behind the audio, adjust the audio delay time to match the video.
You can set the audio delay time between 0 msec and 250 msec.
Note: The audio delay time you specify may not be exact, depending on the played content.
The audio sync function will not resolve instances where the video is ahead of the audio.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with Us
Mon - Fri - 10:00 a.m 7:00 p.m (NZST)