JBL Wave Flex 2

JBL Wave Flex 2

True Wireless Earbuds with JBL Pure Bass Sound and Smart Ambient technology

Getting started with your JBL Wave Flex 2

Getting started with your JBL Wave Flex 2

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Driver size
12 mm/ 0.47" Dynamic Driver
Maximum operation temperature
45 °C
Power supply
5V 1A
Frequency response
20 Hz - 20 kHz
Impedance
16 ohm
Sensitivity
98 dB SPL@1 kHz
Maximum SPL
95 dB
Microphone sensitivity
-38 dBV/Pa@1 kHz
Earbud weight
4.12 g per pc (8.24 g combined) 0.009 lbs per pc (0.018 lbs combined)
Charging case weight
35.68 g/ 0.0786 lbs
Earbud dimensions
18.57*33.48*18.50 mm/ 0.009 lbs per pc (0.018 lbs combined)
Charging case dimensions
54.88*49.30*25.85 mm/ 0.0776 lbs
Bluetooth version
5.3
Bluetooth profile version
A2DP V1.4, AVRCP V1.6.2, HFP V1.8
Bluetooth transmitter frequency range
2.4 GHz – 2.4835 GHz
Bluetooth transmitter power
<9 dBm (EIRP)
Bluetooth transmitter modulation
GFSK, π/4-DQPSK, 8DPSK
Earbud battery type
Lithium-ion battery (45 mAh/ 3.85 V)
Charging case battery type
Lithium-ion battery ( 550 mAh/ 3.8 V)
Charging time
<2 hrs from empty
Music playtime with BT on
Up to 10 hrs
Talk time
Up to 6 hrs

Life's too short for boring Upgrade your everyday Your vibe's here An everyday essential with elevated sound Amplify your world

Quality sound just got easier—and more fun. JBL Wave Flex 2 earbuds feature exciting JBL Pure Bass Sound, plus Smart Ambient technology so you decide how much of the outside world you want to hear. Manage hands-free crisp, clear calls with just a tap of the earbuds. Use the JBL Headphones app to customize your sound and Voice Prompts language. Connect seamlessly with up to 8 Bluetooth® devices and switch effortlessly from one to another. Thanks to their shape, the Wave Flex 2 shine for their comfortable ergonomic design. And with 40 hours of playback time, they’re a great everyday sound companion.

JBL Wave Flex 2 earbuds feature 12mm dynamic drivers that deliver exciting JBL Pure Bass sound.
JBL Wave Flex 2 earbuds come with Smart Ambient technology. Ambient Aware adjusts how much of the outside world you want to hear, while TalkThru lets you talk with others—all without taking your earbuds out.
Two mics on each earbud pick up and clearly transmit your voice while canceling out ambient noise. So you can make clear, crisp calls even when you're walking through a busy park on a breezy day.
Your JBL Wave Flex 2 are IP54 water and dust resistant, so you can use them in rainy or windy conditions. Even the case is IPX2 resistant, so don't worry about bringing it along with you.
Use the JBL Headphones app to select the EQ that fits your style—or customize your own. Voice Prompts in multiple languages give you useful information like whether your battery is running low. Or chill out and recharge in Relax Mode by choosing one of five peaceful sounds, like gentle ocean waves or a crackling wood fire.
Enjoy 10 hours of playtime, plus another three full charges (30 hours) in the charging case. Need to recharge even faster? 10 minutes on a USB type-C charging cable will give you another three hours of playtime.
Pair your JBL Wave Flex 2 earbuds with two Bluetooth® devices at the same time and then switch effortlessly from one to the other. So if you're watching a video on your tablet, you won't miss a call on your mobile phone.
JBL Wave Flex 2 come enabled with both Fast Pair by Google and Swift Pair by Microsoft, so they immediately pair with both your Android devices and Microsoft computer with a single tap.

FAQs & How-Tos

4 results
  • As with all in-ear headphones, our range of TWS headphones can be susceptible to a build up of dust and earwax. This can cause low volume on one or both earbuds, or balance issues (e.g. right earbud is louder than the left earbud). To reduce the likelihood of these issues occurring, it is a good idea to periodically clean your earbuds and your ears. Clean the earbuds by removing dust and wax after each use, using a pointed toothpick to remove larger amounts and a small amount of rubbing alcohol applied to a cotton swab for final degreasing.

    If you are experiencing volume or balance issues, always check for wax and dirt in and around the earbud and driver and complete cleaning of the earbuds as described above. If the issue persists, there may be earwax/dirt stuck in the small holes in the grille in front of the driver, preventing sound output. To resolve the issue try dipping the affected earbud tip into a solution of lukewarm tap water and a small amount of dish soap (washing up liquid). The earbud tip should only be put into the liquid up to a maximum depth of 1-2 mm only (see images below). Immersing the earbuds in water or putting the earbuds in water at a larger depth than this could void your warranty. Keep the earbud tip in the water for about 2-3 minutes, then wipe/clean the grille with a small brush (such as a toothbrush). The should remove the wax and resolve the volume/balance issues.

    cleaning-earstick-tip 
  • It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all TWS earphones and cases.
  • Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off). 
    This restores the earbuds to the factory defaults.
    TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
    It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • This headphone is supported by the My JBL Headphones App.

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: +6499130453

Mon - Fri - 10:00 a.m 7:00 p.m (NZST)

E-mail Us

E-mail Us

365 days a year

We will respond within one business day.

Email Us
Chat with Us

Chat with Us

Mon - Fri - 10:00 a.m 7:00 p.m (NZST)