JBL Wave 100TWS - Ivory - True Wireless In-Ear Headphones - Hero JBL Wave 100TWS - Ivory - True Wireless In-Ear Headphones - Front JBL Wave 100TWS - Ivory - True Wireless In-Ear Headphones - Back
JBL Wave 100TWS - Ivory - True Wireless In-Ear Headphones - Hero
  • JBL Wave 100TWS - Ivory - True Wireless In-Ear Headphones - Swatch Image
  • JBL Wave 100TWS - Purple - True Wireless In-Ear Headphones - Swatch Image
  • JBL Wave 100TWS - Blue - True Wireless In-Ear Headphones - Swatch Image
  • JBL Wave 100TWS - Black - True Wireless In-Ear Headphones - Swatch Image

JBL Wave 100TWS

Great sound, no-frills and no-wires? Simple: JBL Wave 100TWS. Powered by JBL Deep Bass Sound, these true wireless headphones colour your day with up to 20 hours of playback. Total freedom from wires means hands-free calls and full comfort. Immediately paired and independent thanks to dual connect, music, calls and voice assistant can be controlled from the earbud, so you can keep the flow going. Enjoy daily!

Product Specifications

General Specifications

Ear tip material Silicon
Driver size (mm) 8

Audio Specifications

Driver sensitivity at 1kHz/1mW (dB) 105.5
Dynamic frequency response range (Hz) 20 Hz – 20 kHz
Impedance (ohms) 16
Number of drivers per ear 1

Dimension Specifications

Charging Case Weight (oz) 1.3
Earpiece Weight (oz) 0.4
Charging Case Weight (g) 36.1
Earpiece Weight (g) 10.2

Control Connect Specifications

Bluetooth profiles A2DP 1.3, AVRCP 1.6, HFP 1.7
Bluetooth frequency 2.4 GHz – 2.4835 GHz
Bluetooth transmitted modulation GFSK, π/4-DQPSK, 8-DPSK
Bluetooth transmitter power 0 - 10dbm
Bluetooth version 5.0
Please consult the documents for in-depth specs

Documents & Downloads

Videos

What’s in the Box

  • 1 x JBL Wave 100TWS headphones
  • 1 x USB Type-C charging cable
  • 1 x 2 Sizes of eartips
  • 1 x Charging case
  • 1 x Quick Start Guide / Safety Sheet (S / i)
  • 1 x Warranty / Warning (W / !)
JBL Wave 100TWS - What's in the Box

FAQs & How-Tos

  • Cleaning Instructions for Re-establishing Charging

    It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all TWS earphones and cases.

    Category:

    Troubleshooting
  • Headphones & Third Party Communication Apps (Skype, Zoom, WhatsApp, etc)

    If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

    Category:

    Product information
  • Pairing issues with a Computer or PC

    In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).

    The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:

    • A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.

    • AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device

    Always get the latest driver version available for your Computer/PC/Laptop.

    To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.

    The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.

    Category:

    Connectivity

Register your product

Do you own this product?
Register it here!
And claim your warranty or service easily

Register now

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: +6499130453

Mon - Fri - 9:00 a.m 6:00 p.m (NZST)

E-mail Us

E-mail Us

365 days a year

We will respond within one business day.

Email Us
Chat with Us

Chat with Us

Mon - Fri - 9:00 a.m 6:00 p.m (NZST)