JBL Quantum 810 Wireless
Wireless over-ear performance gaming headset with Active Noise Cancelling and Bluetooth
Sold from 2022 until now
Getting started with your JBL Quantum 810 Wireless
Documents & Downloads
Product Specifications
- Driver size (mm)
- 50
- Active Frequency Response
- 20 Hz – 20 kHz
- Driver sensitivity at 1kHz/1mW (dB)
- 95
- Dynamic frequency response range (Hz)
- 20 Hz - 20 kHz
- Impedance (ohms)
- 32
- Passive Frequency Response
- 20 Hz – 40 kHz
- Audio Cable Length (ft)
- 3.9
- Audio Cable Length (m)
- 1.2
- Ear Cup Depth (cm)
- 2.7
- Ear Cup Depth (in)
- 1.1
- Ear Cup External Height (cm)
- 9.7
- Ear Cup External Height (in)
- 3.8
- Ear Cup External Width (cm)
- 8.7
- Ear Cup External Width (in)
- 3.4
- Ear Cup Internal Height (cm)
- 6.2
- Ear Cup Internal Height (in)
- 2.4
- Ear Cup Internal Width (cm)
- 4.2
- Ear Cup Internal Width (in)
- 1.7
- Charging Cable Length (m)
- 1.5
- Charging Cable Length (ft)
- 4.9
- Weight (g)
- 418
- Weight (oz)
- 14.7
- Bluetooth profiles
- A2DP 1.3, HFP 1.8
- Bluetooth frequency
- 2400 MHz - 2483.5 MHz
- Bluetooth transmitted modulation
- GFSK, /4π DQPSK, 8DPSK
- Bluetooth transmitter power
- <12 dBm
- Bluetooth version
- 5.2
- Charging time (hours from empty)
- 3.5
- Maximum play time (hours)
- 43
- 3.5 mm audio cable Input
- Yes
- Audio cable
- Yes
- Bluetooth
- Yes
- Charging cable
- Yes
- Active Noise Cancelling
- Yes
- Built-in Microphone
- Yes
- Over-ear
- Yes
- Wireless
- Yes
Sound is survival
Level up to the JBL Quantum 810 Wireless with Hi-Res certified JBL QuantumSOUND that makes even the tiniest audio details come in crystal clear and JBL QuantumSURROUND, the best spatial surround sound for gaming with DTS Headphone:X version 2.0 technology. With 2.4GHz wireless connection and Bluetooth 5.2 streaming and 43 hours of battery life that charges as you play, you'll never miss a second. Designed for gaming environments, the voice-focus boom mic and noise suppression technology guarantee you'll always come in clear whether you're talking strategy with your team or ordering a pizza. Adjust the Discord-certified dial for the perfect balance, then run and gun all day and night with the convenience of a smaller 2.4 GHz dongle and the comfort of premium leather-wrapped memory foam ear cushions.
FAQs & How-Tos
-
JBL Quantum 400 and ONE are compatible with USB C to A cable to enjoy PS4 console with RGB Lighting on, and Quantum 600 and 800 with wireless-enabled by USB dongle also gives lighting moment on PS4 console games.
*NOTE that RGB will not light up when connecting with 3.5mm cable to any device (PC, Console, Mobile, etc.) because the cable doesn't have power enough for the RBG lighting.Was this helpful? Thank you for your feedback! -
You might have to add a USB extension dock to get the JBL Quantum 350/600/800/810 dongle as close to the headset, or place the common sources of interference (e.g. routers, Wi-Fi speakers etc.) as far from the JBL Quantum 350/600/800/810 dongle.
Was this helpful? Thank you for your feedback! -
Ensure that only one voice chat application is in use while in-game. Be sure you hear a click when the microphone is flipped down. The microphone will only function when it is flipped down fully. If you see a red LED on the microphone, it is muted.
How to check your PC settings for the correct recording device
1. Go to Control Panel
2. Select Hardware and Sound
3. Click on Sound
3 Select Recording
4. Make sure to select the proper recording device.-
Right-click on it Quantum headset.
-
Now select "Set Default Device" or Select "Default Communication Device"
5. Check the microphone levels by right-click on your Quantum headset. Then click on Properties
6. Choose Levels.
7. Adjust accordingly.
Please also make sure the volume control on the headset is turned up. Rotate the volume wheel on your headset to increase the volume.
Check that your headset's Game-Chat balance dial and ensure that the balance is correct, you might refer to the screenshot below from the QuantumEngine PC software.
If you still cannot hear the game or music audio, or if the volume is still very low, check if the TalkThrough is activated via the QuantumEngine software.
Finally, you can also do a short press on the Smart Ambient button on the headset (if your headset, has this feature)Was this helpful? Thank you for your feedback! -
-
Yes, you can adjust the game and chat audio balance by rotating the dial-up and down. When you rotate the dial, you'll feel a notch that indicates the balance is 50% game and 50% chat. The slider on Quantum ONE is different and has no notch but instead a visual indicator.Was this helpful? Thank you for your feedback!
-
You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.Was this helpful? Thank you for your feedback!
-
Make sure the volume control on the headset is turned up. Rotate the volume wheel on your headset to increase the volume. If you're connected to the PC via USB, check that the default device is selected under Control Panel > Sound > Playback. Select JBL Quantum 600 or Quantum 800 Game, right-click, and select "Set as Default Device". Check your headset's game-chat balance dial and ensure that the balance is correct. Check the JBL Quantum 600 or Quantum 800 Game device and make sure it is not muted or turned all the way down.
Was this helpful? Thank you for your feedback! -
JBL Quantum 300, 350, 400, 600, 610, 800, 810 ONE, TWS and Stream are working with the QuantumENGINEWas this helpful? Thank you for your feedback!
-
The “Speaker” mode allows the JBL QuantumENGINE to receive more than two channels of audio. It also prevents some applications from adding extra signal processing intended for other headphones, which would negatively impact the performance of the JBL QuantumSURROUND or JBL QuantumSPHERE 360 technology.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with Us
Mon - Fri - 10:00 a.m 7:00 p.m (NZST)