GT5-12
12 inch Subwoofer
Sold from 2007 until now
| Predecessor Product: | GRAND TOURING GTO 1202D |
|---|---|
| Made in: | China |
Documents & Downloads
Product Specifications
- Size
- 12"
- Series
- GT5
- MSRP U.S.
- $119.95 each
- Peak Power
- 1100W
- Nominal Impedance
- 4 ohms
- Power Handling (RMS)
- 275W
- Frequency Response
- 27Hz–450Hz
- Power Handling (Peak)
- 1100W
- Sensitivity
- (2.83V/1m) 90dB
- External Diameter (in)
- 12-5/16
- External Diameter (mm)
- 313
- Mounting Depth (in)
- 6-7/16
- Mounting Depth (mm)
- 164
- Mounting Cutout Diameter (mm)
- 286
- Mounting Cutout Diameter (in)
- 11-1/4
- Mechanical Q
- (Qms) 6.39
- Magnetic Gap Height
- (Hag – in/mm) 0.315/8
- Motor Force Factor
- (Bl – Tm) 15.2
- Voice Coil Height
- (Hvc – in/mm) 1.43/36.4
- Maximum Excursion
- (Xmax –in/mm) 0.56/14.2
- Suspension Compliance
- (Cms – ?m/N) 135
- Free-Air Resonance
- (Fs – Hz) 29
- Driver Radiating Area
- (Sd – in2/cm2) 82.15/530
- Voice Inductance
- @ 1kHz (Levc – mH) 1.26
- Diecast Aluminum Frame
- No
- Voice Coil DC Resistance
- (Revc – ohms) 4
- Vented Polepiece
- Yes
- Surround
- Hi-roll rubber
- Electrical Q
- (Qes) 0.64
- Low-Frequency Transducer
- 12" (305mm) Polypropylene cone
- Compliance Volume
- (Vas – ft3 / l) 1.9/54.2
- Voice Coil
- 2" (51mm) diameter
- Progressive Spider
- Yes
- Total Q
- (Qts) 0.58
The GT5-12 features a single 4-ohm voice coil and a vented motor structure, and offers 1100 watts of peak power handling. With its fully vented motor structure and rubber-coated tinsel leads, the GT5-12 can withstand even the most intense bass assault. And unlike competing entry-level subwoofers, the GT5-12 is based on a solid motor structure featuring two large magnets covered by the classic JBL® rubber ring.
Road noise can destroy realistic audio that always requires true low frequencies. Polypropylene delivers rigidity, with good internal damping, and complete weather-resistance. You get an impossible-to-miss increase in thumping bass.
With 250 watts RMS and 1100 watts of peak power handling, the GT5-12 changes the experience of listening to your favorite music in your car. And a progressive spider gives better control for lower distortion at excursion limits.
Woofer motor structures heat up during use, causing distortion, or power compression that reduces music’s dynamic range, robbing the sound of realism. JBL uses vented motor structures and polepieces that get rid of more heat to deliver more serious bang.
It’s built to the same exacting standards as JBL professional audio boxes with 3/4" medium-density fiberboard construction, and high-quality binding-post terminals. Wide-bandwidth design provides more output between 20Hz and 40Hz. You get all the bass you’ve paid for.
With a frequency response of 23Hz – 450Hz, the GT5-12 reproduces deep, teeth-rattling bass tones without distortion.
Images & Videos
Can’t find what you’re looking for?
Chat with Us
Mon - Fri - 10:00 a.m 7:00 p.m (NZST)