JBL PartyBox 100

JBL PartyBox 100

Bærbar Bluetooth-partyhøyttaler med lyseffekter

Sold from 2019 until now

Getting started with your JBL PartyBox 100

Getting started with your JBL PartyBox 100

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Quick Start Guide & Downloads

Product Specifications

Output power (W)
160
Dynamic frequency response range (Hz)
45Hz-18kHz
Dimensions (cm)
28.8 x 55.1 x 29
Dimensions (in)
11.3 x 21.7 x 11.4
Weight (kgs)
9.7
Weight (lbs)
21.4
Bluetooth version
4.2
Battery capacity (mAh)
2500
Charging time (hrs)
6.5
Maximum music playing time (hrs)
12
3.5 mm audio cable Input
Ja
Bluetooth
Ja
Charging cable
Ja
Lightshow
Ja
Wireless
Ja
JBL Signature Sound
Ja
Rechargable battery
Ja
Note
The product is in compliance with the European Union energy legislation. 1) Bluetooth connection mode - The product is intended to be used for streaming music via Bluetooth connection. A consumer can stream Bluetooth audio to the speaker. When the product is connected through Bluetooth, the Bluetooth connection must remain active at all times to ensure proper operation. The product will enter into sleep mode (networked standby), after 20 minutes without operation, the power consumption @ sleep is less than 2.0 Watts, after which it can be re-activated via Bluetooth connection. 2) Bluetooth disconnection mode - The product will enter into standby mode, after 20 minutes without operation, the power consumption @ standby is less than 0.5 Watts.

Vær høylytt, vær stolt, vær klar for fest!

Ta med deg festen med den bærbare kraften til JBL PartyBox 100. Lys opp natten. Velg det perfekte lysshowet eller la musikken velge stemningen. Nyt din egen miks. Putt inn en spilleliste med USB-pinne eller stream fra en Bluetooth-kompatibel enhet. Rock løs på farten med innganger for mikrofon og gitar. Finn riktig plassering. Sett høyttaleren på en sokkel og spre den dynamiske JBL-lyden i hele rommet. Hold det gående hele natten med opptil 12 timers batteritid. Koble høyttaleren til veggen for å holde musikken gående.

Dundre løs byens hotteste låter. JBL PartyBox 100 pumper ut 160 watt av den slående JBL-signaturlyden. Start festen når og hvor du vil.
Løft festen med et episk lysshow. Velg mellom flere RGB LED-lysshow eller la fargene groove til musikken for en fest utenom det vanlige.
Rock i vei fra soloppgang til solnedgang med en massiv batterilevetid på opptil 12 timer*.
En mikrofon, og de vil synge. Har gitar, vil spille. Bare plugg de inn i høyttaleren, ta scenen og rock løs.
Det er lett å holde musikken i gang. Bare koble til smarttelefonen, nettbrettet eller favorittjenesten via en hvilken som helst Bluetooth-kompatibel enhet for uavbrutt trådløs streaming.
Tilpass festen. Bygg opp dine ultimate partylyder fra grunnen av. Sett sammen spillelisten din, få den på over på en USB-kompatibel minnepinne og sett den i høyttaleren din.
Ikke nok med bare én høyttaler? Koble sammen to kompatible partyhøyttalere med True Wireless Stereo (Bluetooth)
Løft høyttaleren, og høyttaleren løfter festen. Sett JBL PartyBox 100 på en sokkel for en dynamisk og oppslukende lyd som virkelig vil rocke publikum.

FAQs & How-Tos

17 results
  • If the buttons on your portable speaker are not working properly or are unresponsive while plugged into a power source, please try running the speaker on battery. If the buttons perform correctly while running on battery, this means your power supply is not providing enough current/amps. Be sure to use a power supply that has a rating equal to or greater than the amperage rating indicated in your product specs.
  • You can use the PartyLight Sticks and the PartyLight Beam with older PartyBox speakers. The built-in sound detection algorithm sync the light with the music from the speaker.

    The light also works if you don't own a PartyBox speaker as a built-in mic with a music detection algorithm automatically finds and syncs to any music device that's playing.

  • It is very simple to connect to your Car with the JBL Partybox 200 or 300. Use the included cable that connects through the cigarette connector in your Car and power on the Partybox! Please note that the 12V connection does not charge the battery in the Partybox 300 - it will only power the Partybox when in use. To charge the battery, it will have to be plugged into AC power ( 110 - 230V )
  • This product does not feature speakerphone or voice assistant functionality as it does not have a microphone.
  • Demo mode

    1. Press the Play and Boost button at the same time for 5 seconds.
    2. Depending on what state your JBL Partybox is in, either you enter Demo mode or disabling it.
      1. NOTE: In Demo mode, you cannot use the JBL Partybox as most features and buttons are not working.
    Demo mode
  • Bluetooth Pairing

    1. Press the BT button button on the Partybox to start the pairing process.
    2. Grab your mobile device.
    3. Go to settings --> Bluetooth --> Enable Bluetooth --> BT ON
    4. Find the Partybox speaker you want to establish a Bluetooth connection to.
             BT settings
    1. You now have a successful connection and can stream your favorite music.
      1. NOTE: It is only possible to have two devices connected at the same time and if you want to listen through the second Bluetooth device then stop the current one from playing and use the second device.
      2. To stop Bluetooth broadcasting then insert a USB device.
    BT con
    1. Finding the software version

      1. Press and hold the 'Volume-' and 'Bass Boost' buttons for 5 seconds.
      2. A voice will start prompting numbers which indicates the current software version.
      PBFW_Announce.png
    2. USB Stick

      1. Get an empty USB str stick with speed of 2.0.
      2. Make sure it is formatted with FAT16 or FAT32.
      3. Your Music files can only be: MP3 (32-320kbit/s), WMA(32-320kbit/s) and wAV(44.1K/48K/192K).
      4. The Partybox supports up to 8 subfolders.
      5. It will be played in alphabetic sequence with main folders first then subfolders.
      6. To skip songs forward, double press the Play/Pause button. To skip back, triple press the Play/Pause button.
    3. Resetting the Partybox to Factory Settings

      1. Press and hold "Play/Pause" and "Volume +" down for > 10 seconds.
      2. The JBL Partybox will power off and back on and is now reset.
    4. This model is not supported by the JBL Partybox App.
    < 1 2 >

    Can’t find what you’re looking for?

    Call us

    Call us

    Call us now at: +47 21 93 29 30

    Monday - Friday: 09.00-17.00

    E-mail us

    E-mail us

    We are here Monday – Sunday to answer you as fast as we can!

    Email us
    Chat with us

    Chat with us

    Monday - Friday: 09.00-18.00
    Saturday - Sunday: 10:00-16:00

    message

    WhatsApp Us

    Send us a message here 

    Monday - Friday: 09.00-18.00
    Saturday - Sunday: 10:00-16:00