JBL Flip 6

JBL Flip 6

Portabel vanntett høyttaler

Sold from 2021 until now

Predecessor Product: JBL Flip 5

Getting started with your JBL Flip 6

Getting started with your JBL Flip 6

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Output power (W)
30
Dynamic frequency response range (Hz)
63 Hz - 20k Hz
Dimensions (cm)
17.8 x 6.8 x 7.2
Dimensions (in)
7 x 2.6 x 2.8
Weight (kgs)
0.55
Weight (lbs)
1.21
Bluetooth profiles
A2DP 1.3, AVRCP 1.6
Bluetooth frequency
2400 MHz - 2483.5 MHz
Bluetooth transmitted modulation
GFSK, π/4 DQPSK, 8DPSK
Bluetooth version
5.1
Charging time (hrs)
2.5
Maximum music playing time (hrs)
12
Bluetooth
Ja
Charging cable
Ja
JBL PartyBoost
Ja
Waterproof
Ja
Wireless
Ja
Rechargable battery
Ja
IP Code
IP67

Dristig lyd for ethvert eventyr

Ditt eventyr. Ditt lydspor. Den dristige JBL Flip 6 leverer kraftig JBL Original Pro-lyd med eksepsjonell klarhet takket være det toveis høyttalersystemet som består av en optimalisert racerbaneformet driver, separate diskanthøyttalere og doble pumpende bassradiatorer. Denne kraftige høyttaleren er både vanntett og støvtett, slik at du kan ta den med deg hvor som helst i all slags vær. Og med 12 timers batterilevetid kan du feste til solen går ned – eller kommer opp – uansett hvor musikken tar deg. Bruk PartyBoost til å koble sammen flere kompatible høyttalere. Flip 6 kommer i en rekke kule farger.

Beaten fortsetter med JBL Flip 6 toveis høyttalersystem, konstruert for å levere høy, krystallklar og kraftig lyd. Basshøyttaleren er formet som en racerbane, og leverer eksepsjonelle lave frekvenser og mellomtone, mens en separat diskanthøyttaler produserer presise, klare høyfrekvenser. Flip 6 har også optimaliserte doble passive radiatorer for dyp bass, finjustert med Harmans avanserte algoritme.
Til bassenget. Til parken. JBL Flip 6 er IP67-vanntett og -støvtett, derfor kan du ta høyttaleren med deg hvor som helst.
Ikke tenk på småtingene, som f.eks. å lade batteriet. JBL Flip 6 har inntil 12 timers spilletid på én enkel lading.
Dristig lyd møter tøff design. Stor lyd og enkel å bære – og designet passer enhver personlig stil. Kan stå vertikalt eller horisontalt, og du kan velge blant en rekke sterke farger.
PartyBoost lar deg koble sammen to JBL PartyBoost-kompatible høyttalere for stereolyd, eller lenke sammen flere JBL PartyBoost-kompatible høyttalere for å virkelig få liv i festen.
Maksimer lydopplevelsen med JBL Portable-appen. Få oppdateringer og produktstøtte direkte fra telefonen. Lås opp funksjonene, forsterk lyden eller finjuster bassen for full kontroll over lydbildet.
Slå på strømmen med ro i sjelen. JBL Flip 6 tilbyr USB-C-ladebeskyttelse. Det betyr at en påminnelseslyd vil varsle deg om å koble fra hvis kontakten oppdager vann, salt eller andre kjemikalier.
Du kan koble opptil to smarttelefoner eller nettbrett trådløst til høyttaleren og bytte på å nyte lyden av JBL Pro.
JBL er forpliktet til en mer bærekraftig, miljøvennlig innpakning. Flip 6 er pakket i en resirkulerbar papirbasert eske, inkludert det indre brettet. Plasthengemerket resirkuleres over 90 %, og utsiden skrives ut med soyablekk.

FAQs & How-Tos

13 results
  • You will need to dry the charging port completely before plugging in power for charging.
     
  • This product does not feature speakerphone or voice assistant functionality as it does not have a microphone.
  • This speaker does not have an Aux Input, so no analog connection is possible.
  • Our FLIP 5 speaker is an "All-weather companion," and sometimes it can get dirt and other substances on it. Clean your speaker under lukewarm water from your water tap, and use a microfiber cloth to remove stains. Do not use any alcohol or other to remove stains and dirt. Do not charge your product while the charging port is wet; make sure it is dry before you connect it to a charger. Contact our Customer support if you need more advice.
  • If you encounter issues using the speaker with your phone or tablet, or you want to remove all previous Bluetooth pairings from the speaker, it may be necessary to 'factory reset' the speaker.

    How to reset
    First, remove or forget the speaker from the list of paired Bluetooth devices in the settings of the phone or tablet.
    Then, with the speaker powered on, press and hold the Volume + and Play buttons simultaneously for 3 seconds until the unit turns off.
    The speaker has now been restored to factory default settings. 
  • This product is rated IP67, which is different from IPX7. IP67 protects the product from submersion in 1 meter (3.3 feet) of water for up to 30 minutes. It is also resistant against dust. Dust accumulation around electronics can lead to hardware failure, so the IP67 rating is an extremely beneficial addition to this product. 
  • You cannot download the JBL Portable App on a PC. This app is only available on mobile devices.
  • If you create a Stereo Pair using the JBL Portable App and you come within range of additional PartyBoost compatible speakers while they are ON, the app will find these speakers. This will break the stereo pair and create a mono PartyBoost group that includes all active speakers that are in proximity. This only happens when the JBL Portable App is actively running on the source device, including when it is running in the background, and when these other speakers are ON. To avoid this scenario, make sure the app is completely closed, without running in the background before coming near any additional PartyBoost speakers that happen to be ON.


    NOTE: The Portable App does not need to be running in order to enjoy Stereo sound from two speakers

  • The new PartyBoost does not support the previous Connect and Connect+ features. For example: You will not be able to successfully connect the new PartyBoost enabled Flip 5 with a Connect+ enabled speaker like the Pulse 3 or Flip 4. You will not be able to connect the Boombox 2 to the original Boombox speaker.

  • 1. Connect the first Partyboost speaker with your phone and keep music playing (for best results play music on this speaker for more than 20 seconds before proceeding with the next steps).
    PartyBoostBluetoothButton.png
    2. Press the Partyboost button on the first speaker.
    3. Turn on the second speaker that you want to connect in Partyboost mode.
    4. Now press the Partyboost button on the second speaker.
    5. After a few seconds, both Partyboost speakers should connect and play together.
    It can take a few seconds after music is started before sound will be heard from both speakers.
    This is also the process for connecting more than two speakers in Party mode, simply turn on the other compatible speakers and press the Partyboost buttons. PartyBoostButtonsGroup.png
< 1 2 >

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +47 21 93 29 30

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00