JBL PartyLight Stick

You can use the PartyLight Sticks and the PartyLight Beam with older PartyBox speakers. The built-in sound detection algorithm sync the light with the music from the speaker.

The light also works if you don't own a PartyBox speaker as a built-in mic with a music detection algorithm automatically finds and syncs to any music device that's playing.

For the best PartyLight Stick and PartyLight Beam performance, connect it by using a JBL Auracast™-enabled PartyBox models such as the PartyBox Club 120, Stage 320 and Ultimate.

Hold the "Light" button for more than 2 seconds to reset the JBL PartyLight Beam.

Hold the "Light" button for more than 10 seconds to reset the JBL PartyLight Stick.

To charge the PartyLight Stick you need a charger with at least 5V/2A output. You can use the PartyLight Stick while it's charging.

The playtime for the PartyLight Stick is up to 8 hours. The playtime can vary depending on light, brightness, music, and environmental conditions. The playtime will also decrease if the backlight is turned on as this consumes more energy.

You can always check the battery level by pressing the power button twice. The white light on the PartyLight Stick will indicate the battery level. A red light indicates the battery level is low.

In Standard mode, an unlimited number of PartyLight Sticks or PartyLight Beams can be connected to a PartyBox.
Stage mode can be switched on via the JBL PartyBox app.
In Stage mode at least 4 lights and a maximum of 32 Sticks can be connected to a PartyBox.