JBL PartyBox Ultimate
JBL PartyBox Ultimate er en stor, kraftig festhøyttaler med overlegen JBL Pro-lyd og et levende lysshow. Den er sprutsikker og har solide hjul for enklere transport.
Sold from 2023 until now
Getting started with your JBL PartyBox Ultimate
Quick Start Guide & Downloads
Product Specifications
- Output power (W)
- 1100
- Dynamic frequency response range (Hz)
- 30Hz-20KHz (-6dB)
- Dimensions (cm)
- 45.5 x 105.0 x 44.0
- Dimensions (in)
- 17.9 x 41.3 x 17.3
- Weight (kgs)
- 39.5
- Weight (lbs)
- 87.1
- Bluetooth profiles
- A2DP V1.3, AVRCP V1.5
- Bluetooth frequency
- 2400 MHz – 2483.5 MHz
- Bluetooth transmitted modulation
- GFSK, π/4 DQPSK, 8DPSK
- Bluetooth version
- 5.3
- JBL One App
- Ja
- Built-in Wi-Fi
- Ja
- 3.5 mm audio cable Input
- Ja
- Bluetooth
- Ja
- Lightshow
- Ja
- Splashproof
- Ja
- Wireless
- Nei
- IP Code
- IPx4
- -
- * Det kreves et abonnement på en musikktjeneste med høy oppløsning for å få den optimale lydgjengivelsen i musikken med Dolby Atmos. Sjekk abonnementsprisene i ditt område.
Fest uten grenser
JBL PartyBox Ultimate fyller all plassen du har med overlegen original JBL Pro Sound, forsterket med en oppslukende Dolby Atmos-opplevelse over Wi-Fi*. Fordi alle på en fest elsker kraftig lyd enten de viser seg på dansegulvet eller lytter fra sidelinjen. Sammen med lyd som er krystallklar selv på sitt høyeste, vil gjestene dine glede seg over et stort, fantastisk lysshow av fengslende stjernelys, kule lysstier og strobeeffekter, som alle beveger seg synkronisert med rytmen din. Gjør det enkelt ved å strømme favorittspillelisten din. Du kan til og med gå på scenen. Det er innganger for to mikrofoner og en gitar. Uansett hvordan ting utvikler seg, kan du skape din egen fest ved hjelp av de morsomme interaktive effektene i JBL PartyPad™. Planlegger du noe enda større? Gjør festen din om til et større arrangement. Trådløs paring og tilkobling med flere høyttalere er enkelt å sette opp og tilpasse ved hjelp av JBL One-appen. Den sprutsikre JBL PartyBox Ultimate er selvjusterende. Den kommer til å høres best mulig ut uansett hvor du plasserer den. Tenk på den mest suverene festen noensinne – og lag en som er større. Det er det JBL PartyBox Ultimate ble laget for.
FAQs & How-Tos
-
The top panel LEDs are flashing because the OTA firmware update is in progress, the product should work after the upgrade is completed. It may have been caused by a previous interruption to an update.
It should be possible to resolve the issue by doing the following:
- Plug in the power cable and wait for at least 5 minutes for the Partybox Ultimate to complete the update.
- If the Partybox Ultimate stops flashing, but cannot power on, then perform a factory reset by pressing the two buttons below for more than 10 seconds: Moment (heart symbol) and Play (or through the JBL One app). After this has been done, press the Power button.
Was this helpful? Thank you for your feedback! -
Yes!
By using the JBL ONE app, you can change the equalization settings of the speaker to fit your personal taste by adjusting the settings of each frequency to create your personalized EQ:- BASS: Adjust the lower frequency sounds, such as bass or a kick drum.
- MID: Adjust the mid-frequency sounds, such as human speech.
- TREBLE: Adjust the higher frequency sounds for clarity.
Was this helpful? Thank you for your feedback! -
You can use the PartyLight Sticks and the PartyLight Beam with older PartyBox speakers. The built-in sound detection algorithm sync the light with the music from the speaker.
The light also works if you don't own a PartyBox speaker as a built-in mic with a music detection algorithm automatically finds and syncs to any music device that's playing.
Was this helpful? Thank you for your feedback! -
Yes, however, the JBL ONE App gives you another level of control over the speaker/soundbar.
Through the App, you can personalize the speaker/soundbar's performance, such as:- Customizing EQ settings
- Setting up our new feature called: My Moment
- Connect your favorite streaming music services.
Was this helpful? Thank you for your feedback! -
For the best PartyLight Stick and PartyLight Beam performance, connect it by using a JBL Auracast™-enabled PartyBox models such as the PartyBox Club 120, Stage 320 and Ultimate.
Was this helpful? Thank you for your feedback! -
This product does not feature speakerphone or voice assistant functionality as it does not have a microphone.Was this helpful? Thank you for your feedback!
-
Once the speaker/soundbar is connected to the network, software updates will automatically be sent to the product through Wi-Fi or the internet, if availableWas this helpful? Thank you for your feedback!
-
In the JBL ONE App:
(1) Go to My Products, select your product
(2) Select Support tile
(3) Under General, select Product SupportWas this helpful? Thank you for your feedback! -
If you cannot stream music with AirPlay, use the JBL One App;
(1) Go to Settings.
(2) Select 3rd Party Service.
(3) Select the Airplay tile.
(4) Select Reset AirPlay.Was this helpful? Thank you for your feedback! -
(1) Select the JBL speaker/soundbar you want to rename
(2) Navigate to the Support tile and select "Rename My Product."
(3) Press the current name and type in the new name
(4) Press SAVEWas this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00