JBL Wireless Microphone Set

JBL Wireless Microphone Set

Trådløst system med to mikrofoner

Getting started with your JBL Wireless Microphone Set

Getting started with your JBL Wireless Microphone Set

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Avstand mellom sender og mottaker
>10 m
Polarmønster
Cardioid
Frekvensrespons
65 Hz – 15 kHz
Signal- og støyforhold (S/N)
60 dBA
UHF-frekvensbånd
470–960 MHz (avhenger av SKU) (EU 657–662 MHz)
THD
0,5 %, typisk
Dynamisk spektrum
100 dB A-vektig, typisk
Senderens effekt
<10 mW, typisk
Inngang for mottaker
6,3 mm (1/4 tommer) ubalansert
Maksimalt lydnivå for mottaker
-13 dBv, vanligvis
Oppladbart batteri for mottaker
Lithium-ion Polymer 3,7 Wh (tilsvarende 3,7 V, 1000 mAh)
Ladetid for mottaker
to timer à 5 V/1 A
Spilletid for mottakerbatteri
opptil seks timer
Mikrofonbatteri
4 x AA alkaline (inkludert)
Mål (B x H x D)
Mikrofon Φ50 x 233 mm / 1,95 tommer x 9,16 tommer; mottaker 70 mm x 80 mm x 20 mm / 2,75 tommer x 3,14 tommer x 0,78 tommer
Vekt
Mikrofon 235 g 0,52 lb; mottaker

Syng med helt klar stemme og Original JBL Pro Sound

Det er på tide du stiller deg i søkelyset. Trådløse mikrofoner fra JBL leverer Original JBL Pro Sound med helt utrolig krystallklar stemmeklarhet. Du høres bra ut og treffer de høye tonene uten forvrenging eller forsinkelse. Bare plugg den trådløse dobbeltkanals mottakeren med i høyttaleren, skru på mikrofonene, så er du rett og slett klar. Det er en enkel sak å skifte AA-batterier, så stem i av hjertens lyst til solen står opp. Tid for en duett? Du vil å høre at begge mikrofonene samhandler perfekt gjennom høyttaleren. Klar for rampelyset.

Den krystallklare klarheten til trådløse mikrofoner fra JBL betyr null jamming, forsinkelse eller forvrengning. Med backing av tradisjonell JBL Pro Sound vil lyden av stemmen stemme helt perfekt.
Det er ingen grunn til å gå solo, med mindre du vil stjele rampelyset, så klart. Koble to trådløse mikrofoner sammen og hør begge stemmene i perfekt harmoni fra høyttaleren med opptil seks timers spilletid.
Når du vil bli hørt, vil du høres nå. De trådløse mikrofonene fra JBL har et eksepsjonelt enkelt oppsett. Bare sett på mottakeren og den trådløse mikrofonen, så er du straks klar.
Trådløse mikrofoner fra JBL kommer med lett utbyttbare AA-batterier, for skikkelig danseglede hele natten.
Bruk trådløse mikrofoner fra JBL med mikrofoninngang, men legg til enhver høyttaler fra JBL PartyBox med mikrofoninngang for den beste opplevelsen.

FAQs & How-Tos

4 results
  • While the Partybox Encore does not have a Microphone Input, it does have an internal receiver for the wireless microphone that comes with the product.

     

    It is possible to pair one of the microphones from the Partybox Wireless Mic * (sold separately from the Partybox Encore, containing 2 x Wireless Microphones and 1 x Receiver/Dongle for connection with 6.3 mm microphone jack inputs) - however, a maximum of 2 wireless microphones can be connected to the receiver at a time.

     

    As an alternative, a spare part accessory is available (dependent on stock levels), which includes just 1 x Microphone for Partybox Encore - search for the aforementioned product name or "FG7261JMJ100114" in our online store.

     

    To connect an additional Wireless Microphone to the Partybox Encore, follow these steps:

    Switch off the Partybox & both microphones.

    Once off, switch on both microphones only, then switch on the Partybox and both microphones should connect to the receiver.

    If not, please try the same instructions as above expect with a Factory Reset (Press and hold the "Play" and "Light" buttons for > 10 seconds) instead of the restart above, then follow the microphone pairing procedure:

    1. Turn off the speaker.

    2. Make sure that the distance between the new wireless microphone and speaker is within 1 meter. Turn on the microphone.

    3. Turn on the speaker. The microphone will pair and connect with the speaker automatically within 3 minutes.

     

    *Please note that regarding the older version of the JBL Partybox Wireless Mic - the JBL Wireless Microphone Set - the microphones are not compatible with the Partybox Encore whatsoever, as they use UHF instead of 2.4 GHz for communication between the microphones and receiver (and the Partybox Encore does not have a Microphone Input).

  • To successfully connect the JBL Wireless Microphone Set to a Partybox, connect the supplied 6.3mm jack dongle to the Partybox's Microphone Input. Now turn on the dongle and the Partybox. The dongle's Power button light should stay lit, if the light turns off or does not stay lit it is off and needs to be charged with the provided USB cable.*

    Now turn on one or both microphones as required and increase the Mic volume and gain to the desired level. The LED screen will show a channel number 'CH-1', 'CH-2', etc. The channel number is not changeable manually, and may change between power cycles, but all channels will connect automatically to the dongle. If the LED screens do not show a channel number, the batteries in the microphones need to be replaced.

    *Charging the dongle while in use is not recommended and will likely cause unwanted interference.
  • You can connect two of the same Partybox models (e.g. 2 x Partybox 310, or 2 x Partybox 100) together in TWS Mode by pressing and holding the Bluetooth button on both speakers for 5 seconds, or by pressing the dedicated TWS buttons on the rear panels of both speakers on the Partybox 110, 310 and 710. It is possible to pair two different Partybox models together using a wired connection (e.g. 1 x Partybox 310 and 1 x Partybox 100). It is also possible to pair two Partybox different models wirelessly in Party mode, however this is only possible with the newer Partybox models - the Partybox 110, 310 and 710. The Partybox 200 & 300 can be paired in TWS mode as they are the same model apart from the presence of a battery in the Partybox 300. If you connect an instrument or microphone to one Partybox speaker while using TWS, the instrument or microphone connected to one speaker will be reproduced by this speaker alone. You will not hear the instrument or microphone in both speakers. If it is necessary to have instruments reproduced by two or more PartyBox speakers, it is possible to use an RCA or aux cable – connected from the RCA, aux or daisy chain outputs on the speaker that the instrument or microphone is connected to, wired to the RCA, aux or daisy chain input of the secondary speaker. Alternatively a small mixing console can be used - connecting audio sources to this mixer and sending the mixed audio signal to the speakers with a wired connection.
  • The JBL Wireless Microphone set allows 2 x wireless microphones* to be connected to any Partybox model ** through the use of a dongle connected to the Mic input. Additionally, a 3rd wired microphone - like the JBL PBM100 Wired Microphone, can also be connected to the switchable Guitar/Mic 2 input (only available on some Partybox models). This will also work when using the non-switchable Guitar input on other Partybox models - however, this will bypass the karaoke effects including echo for the connected microphone and would generally have a slightly different sound character/timbre to a microphone connected to the Microphone input.

    *This includes the Partybox On-The-Go, a maximum of 2 wireless microphones can be connected and used simultaneously. The standard bundled Partybox On-The-Go microphone can only be connected to the Partybox On-The-Go that it came bundled with, it also cannot connect wirelessly to any other Partybox models or portable speakers other than the Partybox On-The-Go that it came bundled with. Only one standard, bundled Partybox On-The-Go wireless microphone can be connected at a time, unless the JBL Wireless Microphone is purchased (sold separately), a spare part will only work as a replacement, not simultaneously.

    PartyBox ModelMic ArrangementPorts UsedMAX
    ** Encore1 Wireless (pre-paired, included) OR 2 Wireless (sold separately, second microphone needs to be manually paired as described in Owner's Manual)N/A - Wireless (pre-paired, no Wired Microphone port)2
    100/110/Encore Essential1 Wired OR 2 Wireless (Wireless Microphone Set must be used, sold separately)Mic Port2
    2001 Wired OR 2 Wireless (Wireless Microphone Set must be used, sold separately)Mic Port2
    3001 Wired OR 2 Wireless (Wireless Microphone Set must be used, sold separately)Mic Port2
    310/310 MC*/710/Ultimate1 Wired AND 2 Wireless (Wireless Microphone Set must be used, sold separately)Mic Port AND Mic/Guitar Port3
    10001 Wired OR 2 Wireless (Wireless Microphone Set must be used, sold separately)Mic Port2
    On-The-Go/On-The-Go Essential1 Wired AND 1 Wireless (pre-paired, included)
    OR

    2 Wireless (Wireless Microphone Set must be used, sold separately)
    Mic Port AND N/A - Wireless (pre-paired)
    OR
    Mic Port (pre-paired microphone will not work simultaneously when dongle used)
    2
    OR
    2
    * Partybox 310 MC - is a standard Partybox 310, which comes bundled with 1 x Wired Microphone (PBM100).

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +47 21 93 29 30

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00