JBL Charge 3
Full-featured waterproof portable speaker with high-capacity battery to charge your devices
Getting started with your JBL Charge 3
Documents & Downloads
Product Specifications
- Output power (W)
- 2 x 10
- Dimensions (in)
- 8.38 x 3.42 x 3.48
- Dimensions (cm)
- 21.3 x 8.7 x 8.85
- Weight (kgs)
- 0.8
- Weight (lbs)
- 1.76
- Bluetooth version
- 4.1
- Charging time (hrs)
- 4.5
- Maximum music playing time (hrs)
- 20
- Battery capacity (mAh)
- 6,000
- JBL Connect
- Ja
- JBL Connect+
- Ja
- Speakerphone
- Ja
- Auto-power off
- Ja
- 3.5 mm audio cable Input
- Ja
- Powerbank
- Ja
- Voice Assistant integration
- Ja
- Waterproof
- Ja
- Wireless
- Ja
- Bluetooth
- Ja
Listen wirelessly. Charge endlessly.
JBL Charge 3 is the ultimate, high-powered portable Bluetooth speaker with powerful stereo sound and a power bank all in one package. The Charge 3 takes the party everywhere, poolside or in the rain, thanks to the waterproof design, durable fabric and rugged housing. Its high-capacity 6,000mAh battery provides up to 20 hours of playtime and can charge your smartphones and tablets via its USB output. A built-in noise and echo-cancelling speakerphone gives you crystal clear calls with the press of a button. Wirelessly link multiple JBL Connect-enabled speakers to amplify the listening experience.
FAQs & How-Tos
-
If you are having trouble with distortion or drop outs, try the following suggestions:
Move the audio source closer to the speakers
Move the speakers closer to each other
Make sure the streaming speaker (host) only connects to one audio source, disconnect the Bluetooth connection between the streaming speaker (host) and other audio source
Make sure the audio source only connects with one streaming speaker (host), disconnect the Bluetooth connection between the audio source and other speakers
Restart both your speakers and the audio source
Make sure speakers are away from other sources of wireless signal – you could be experiencing interference
Re-pair the audio source with your speaker
If you’re streaming audio content from the internet, the issue could be with the internet connection and not your speakerWas this helpful? Thank you for your feedback! -
If the buttons on your portable speaker are not working properly or are unresponsive while plugged into a power source, please try running the speaker on battery. If the buttons perform correctly while running on battery, this means your power supply is not providing enough current/amps. Be sure to use a power supply that has a rating equal to or greater than the amperage rating indicated in your product specs.Was this helpful? Thank you for your feedback!
-
Charge 3 can be updated with the JBL Connect app, which will inform the user when an update is available.Was this helpful? Thank you for your feedback!
-
You need to dry the micro USB or power ports completely before plug-in power for charging.Was this helpful? Thank you for your feedback!
-
No, JBL Flip 4 can wirelessly link with JBL Connect+ compatible speakers only. Currently, the Flip 4, Pulse 3 and Charge 3 ( after a firmware upgrade ) have the JBL Connect+ featureWas this helpful? Thank you for your feedback!
-
1. In order to change the name of the speaker, you must first connect your speaker via Bluetooth and then download the JBL Connect app.
2. Once the app is downloaded choose app and wait for it to recognize your device.
3. Now that your speaker is highlighted, choose the gear located either below or to the right of the speaker image.
4. Once you choose the gear you will have the option to edit the name by clicking on the small pencil icon.
5. After you change the name, you will see a notification stating to "Reconnect to Apply New Name"
6. Go to your Bluetooth settings select "Forget This Device" and then reconnect to establish the new speaker name.Was this helpful? Thank you for your feedback! -
If there are drop out or connection issues when using PartyBoost or Connect+, it could be one of three things.
1. Units are too far apart (move units closer together)
2. Interference from other 2.4gHz wireless units in the area.
3. Unit is no longer working as designed
Here are some steps to isolate the issue:
Try taking the units out of the house and test it outside with no interference to see if you still experience connectivity issues. If you still experience connectivity issues, please try steps below:
Whatever unit drops off, remove that from the chain. Test the rest of the speakers and keep doing it until you find the speaker that is causing the drop outs. If all speakers begin to drop off, please try a different order and repeat. Repeat this process with each unit being the “main speaker”.Make sure to turn off all WiFi/RF devices. (Router, laptop, baby monitor, Nest cams, IP cams, WiFi switches, WiFi outlets, WiFi lights, cordless phones, etc.)
You should be able to identify the issue/speaker by following these steps.
Was this helpful? Thank you for your feedback! -
Yes, it is needed to close the USB cap completely for waterproof.Was this helpful? Thank you for your feedback!
-
No, the IP waterproof specification means that these speakers can be immersed in water 1 m deep for 30 minutes. It does not mean that they can float, so please be careful. If dropped, they will sink to the bottom.Was this helpful? Thank you for your feedback!
-
Power ON the device, then press and hold the "Volume+" and the "Play/Pause" buttons at the same time. When the device switches off after a few seconds, sounding the OFF prompt, it has been reset.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00