JBL Wave Beam

JBL Wave Beam

Helt trådløse ørepropper

Sold from 2022 until now

Getting started with your JBL Wave Beam

Getting started with your JBL Wave Beam

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Driver size (mm)
8
Ladeetui IP Code
IPX2
Number of Microphones
1
Driver sensitivity at 1kHz/1mW (dB)
100
Dynamic frequency response range (Hz)
20 Hz – 20 kHz
Impedance (ohms)
16
Charging Case Weight (oz)
1.4
Earpiece Weight (oz)
0.3
Lade-etuiets vekt (g)
39.5
Øreproppens vekt (g)
8.8
Bluetooth version
5.2
Bluetooth profiles
A2DP V1.3, AVRCP V1.6, HFP V1.7
Bluetooth frequency
2.4 GHz - 2.4835 GHz
Bluetooth transmitted modulation
GFSK, π/4 DQPSK, 8DPSK
Charging time (hours from empty)
2
Maksimum spilletid (timer)
32
IP Code
IP54
Charging cable
Ja
Ambient Aware
Ja
Built-in Microphone
Ja
Hands Free Call
Ja
TalkThru
Ja
Touch Control
Ja
True Wireless
Ja
Water Resistant
Ja
Charging case
Ja
Speed charge
Ja
Rechargable battery
Ja
Bluetooth
Ja

Dyp bass, mye moro

Bring lyden med deg. Med bass du kjenner,opptil 32 timers batteritid, og et sikkert og godt feste, er de vann og sprutbestandige JBL Wave Beam designet for en hel dag med underholdning. Om du vandrer i byens gater eller ligger på stranden, har du alltid krystallklare samtaler i stereo, uten å bruke hendene. Det hele skjer mens Smart Ambient-teknologi holder deg oppmerksom på omgivelsene. Trenger du en ekstra boost, lader du på 10 minutter inntil 2 timer med ekstra strøm.

Få mest mulig ut av miksene dine med høykvalitets lyd fra sikre og pålitelige ørepropper via drivere på 8 mm med JBL Deep Bass-lyd.
Med sitt ergonomisk design sitter JBL Wave Beam godt festet, og er så behagelige at du glemmer at du bruker dem. Øreproppenes design holder lyder utenfra unna og gjør bassen bedre.
Med 8 timers batteritid i øreproppene og 24 i etuiet, har du lyd med JBL Wave Beam hele dagen. Trenger du en ekstra boost, lader du på 10 minutter inntil 2 timer med ekstra strøm.
Dra overalt og hør alt med Smart Ambient-teknologi. Når du trenger en pause for en kjapp prat, hører du straks deg selv og de rundt deg med TalkThru, uten å ta ut øreproppene. Eller bruk Ambient Aware for å holde musikken i gang, mens du er oppmerksom på omgivelsene.
Når du har håndfrie samtaler i stereo mens du er på farten, vil VoiceAware balansere hvor mye du hører av egen stemme via VoiceAware.
Disse IP54-sertifiserte øreproppene og IPX2 ladeetuiet holder seg bestandige mot sprut og støv hele veien fra strand til sykkelsti for opplevelser som varer hele dagen.
Lytt hele dagen, som du vil. Still inn lyden du vil ha med den dedikerte appen, og gjør JBL Wave Beam til den perfekte lydpartner.

FAQs & How-Tos

3 results
  • It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all True Wireless Stereo earphones and cases.
  • Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off). 
    This restores the earbuds to the factory defaults.
    TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
    It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • This headphone is supported by the My JBL Headphones App.

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +47 21 93 29 30

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00