JBL Quantum Stream Studio
USB-mikrofon for strømming
Sold from 2023 until now
Getting started with your JBL Quantum Stream Studio
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowQuick Start Guide & Downloads
Product Specifications
- Nødvendig strøm / forbruk
- 5 V ⎓ 500 mA
- Frekvensrespons
- 50 Hz – 16 kHz
- Følsomhet
- -37±3 dB (1 kHz ved 1 Pa, 0 dB = 1 v/Pa)
- Maksimal SPL
- 110 dB
- Prøvefrekvenser
- 44.1kHz / 48 kHz / 96 kHz / 192 kHz
- Bithastighet
- 16/24 bit
- Enheter
- 3 * 14 mm elektriske kondensatormikrofoner
- Polarmønstre
- Kardioid, retningsbestemt, stereo, toveis
- Impedans i forsterker for hodetelefoner
- 16 ohm / 32 ohm
- Strømuttak for hodetelefoner (RMS)
- 42 mWrms per kanal (last = 32 ohm)
- Hodetelefoner THD
- < 0,5 % (last = 32 ohm)
- Frekvensrespons for hodetelefoner
- 20 Hz – 20 kHz
- Signal for støy i hodetelefoner
- 92 dB med 48bkHz prøvefrekvens, 93 dB med 192 kHz prøvefrekvens (A-vekt)
- Vekt på mikrofon med stativ
- 582 g
Lyd er livet La stemmene bli hørt
Hør proff ut med JBL Quantum Stream Studio som mikrofon. Om du gamer, strømmer eller spiller inn selv, veksler du kjapt mellom fire forskjellige mønstre for opptak hvis du har en makker eller et rom fullt av gjester. Da blir nemlig alle hørt. Null ekstra utstyr trengs for å spille opp på neste nivå. Du vet alltid hvor høyt ting høres ut, takket være RGB VU-måleren, og kompressoren med dynamisk rekkevidde sørger for at alle stemmer holder samme nivå. Strømmer du et spill? Hold stålkontroll på balansen av lyder og egne kommentarer mens du gamer. Bruk JBL QuantumENGINE PC, programvaren som følger med til å justere EQ, bruke støyreduksjon eller justere mikrofonens sterke RGB-belysning.
FAQs & How-Tos
-
The JBL Quantum Stream Studio comes with an adapter that can be mounted on different boom mic arm systems or tripods. The adapter is already built in the microphone stand so that you always have the adapter close to you when needed.
Was this helpful? Thank you for your feedback! -
You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.Was this helpful? Thank you for your feedback!
-
You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.Was this helpful? Thank you for your feedback!
-
Sidetone is by default enabled for the JBL Quantum Stream Studio. You can lower the sidetone volume or mute it by pressing the multifunction knob until you are at the audio/voice balance function. Turn the knob towards the voice (microphone icon) to increase the audio volume and lower down the sidetone volume at the same time. Turn the knob towards the headphone icon to increase the sidetone volume and reduce the audio volume.
Was this helpful? Thank you for your feedback! -
To reset a Quantum headset, you need to connect the product to your computer and open the QuantumEngine.
When you have the QuantumEngine open, go to the "System Software" tap and press "Restore Factory Settings".
Only products that are compatible with the QuantumEngine can be reset this way.
Was this helpful? Thank you for your feedback! -
Try to move the microphone closer to the sound source and adjust it for a better angle. You should also try to decrease the microphone volume to an appropriate level by turning the volume down.
Finally, try to enable the Dynamic Range Compressor (DRC) option in the QuantumEngine to lower the chance of distortion.
Was this helpful? Thank you for your feedback! -
Try to move the microphone closer to the sound source and adjust it for a better angle. You should also try to increase the microphone volume to an appropriate level by turning the volume up.
Finally, try to increase or decrease the microphone gain level if the sound is distorted.Was this helpful? Thank you for your feedback! -
Restoring QuantumENGINE to 1.19 from 2.0:
Please note: Before reverting to QuantumENGINE 1.19, please be aware that any settings from QuantumENGINE 2.0 will not be saved and reloaded into QuantumENGINE 1.19.
Uninstall QuantumENGINE v2.0
- Start the uninstall process. Go to: Settings -> Apps -> Installed Apps -> find "JBL QuantumENGINE" and select uninstall.
- When prompted to uninstall, select “Remove all related settings” and click Uninstall
Install QuantumENGINE 1.19
- Click this link to download the JBL QuantumENGINE v1.19: https://support.jbl.com/quantum-engine-latest
- Double-click the downloaded file "JBL_QuantumENGINE_1.19.0.2025_x64" and follow the instructions to finish the installation.
- Restart the PC.
- Launch JBL QuantumENGINE and enjoy!
Was this helpful? Thank you for your feedback! -
In every microphone there are polar patterns that describes the microphone directionality. Different polar patterns describe how well the microphone module picks up sound waves coming from different directions.
There are four different polar patterns which can be used for different situations. The Cardioid pattern is the best option when you are recording on your own. The Omni-directional pattern is the most suitable for recordings with multiple people from different directions. The Stereo pattern is most optimal when two people are sitting next each other or playing an instrument during a recording. The bidirectional pattern works the best when two people are sitting opposite each other.
Was this helpful? Thank you for your feedback! -
The JBL Quantum Stream microphone is compatible with the JBL QuantumENGINE software. You can customize or use the following settings/features via the JBL QuantumENGINE:
Microphone settings
Polar patters (Cardioid / Onnidirectional)
Equalizer
RGB LED Light colors + animations/effects
Update firmware + softwareWas this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
