JBL Tune 760NC

JBL Tune 760NC

Trådløse øredekkende hodetelefoner med støyreduksjon

Getting started with your JBL Tune 760NC

Getting started with your JBL Tune 760NC

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Driver size (mm)
40
Number of Microphones
2
Driver sensitivity at 1kHz/1mW (dB)
["103 dB SPL/1 mW (passive)", "95 dB SPL/1 mW (active)"]
Dynamic frequency response range (Hz)
20 Hz - 20 kHz
Impedance (ohms)
32
Dybde (cm)
2
Ear Cup Depth (in)
0.8
Høyde (cm)
9.2
Ear Cup External Height (in)
3.6
Bredde (cm)
7.6
Ear Cup External Width (in)
3
Indre bredde (cm)
5.4
Ear Cup Internal Height (in)
2.1
Indre høyde (cm)
3.7
Ear Cup Internal Width (in)
1.5
Hodetelefonens kabellengde (m)
0.2
Headphone Cable Length (ft)
0.7
Weight (g)
220
Weight (oz)
7.8
Bluetooth profiles
A2DP 1.3, AVRCP 1.5, HFP 1.6
Bluetooth frequency
2.4 GHz - 2.4835 GHz
Bluetooth transmitted modulation
GFSK, π/4 DQPSK , 8DPSK
Bluetooth version
5.0
Charging time (hours from empty)
2
Maximum music play time with ANC off (hours)
50
Maximum music play time with ANC on (hours)
35
Maksimum spilletid (timer)
35
Audio cable
Ja
Bluetooth
Ja
Charging cable
Ja
Detachable Cable
Ja
Sammenleggbar
Ja
Voice Assistant integration
Ja
Active Noise Cancelling
Ja
Built-in Microphone
Ja
Hands Free Call
Ja
JBL Pure Bass Sound
Ja
Multi-Point Connection
Ja
Over-øret
Ja
Rechargable battery
Ja
Wireless
Ja

Nyt musikken din uten støy

Musikken din, ingenting annet teller. Øredekkende, superkomfortabel og kraftig. JBL Tune 760NC holder løftet. Den aktive støyreduksjonen blokkerer unødvendige forstyrrelser slik at du kan fokusere på det som betyr noe, i opptil 35 timer. Ikke nok? Få 2 timer ekstra avspilling med kun 5 minutter lading.Tune 760NC er lett og sammenleggbar for å passe ethvert eventyr. Den kan kobles til to Bluetooth®-enheter samtidig, slik at du aldri går glipp av et anrop på telefonen mens du ser en video på nettbrettet. JBL Tune 760NC blir umiddelbart paret med Android-enheten din med et trykk, og tilbyr håndfri håndtering av samtaler og enhetens stemmeassistent. For å gjøre det enda mer moro, er det bare å plugge JBL Tune 760NC med den medfølgende avtakbare kabelen. Velg fargen som passer til humøret ditt og ha det gøy!

Lytt på musikken din. Fjern ekstern støy.
I 75 år har JBL produsert den presise og imponerende lyden du kan høre på store arrangementssteder over hele verden. Disse hodetelefonene reproduserer den samme JBL-lyden, med bass som er både dyp og kraftig.
Lytt trådløst i 35 timer med aktiv støyreduksjon – for moro som varer, eller 50 timer med ANC slått av. Lad opp batteriet raskt på to timer.
Kontroller enkelt lyden din, håndtert samtalene dine og utløs stemmeassistenter fra hodetelefonene dine med knappen på øreklokken.
JBL Tune 760NC kobler umiddelbart opp med Android-enheten din, takket være Fast Pair fra Google. Du kan også pare flere enheter ved å trykke på enhetens skjerm.
Du kan enkelt bytte fra én Bluetooth®-enhet til en annen. Du kan enkelt bytte fra en video på nettbrettet til et anrop på mobilen, så du aldri går glipp av anrop.
Lett og kompakt design som kan brettes sammen gjør disse hodetelefonene alltid klare til å reise overalt.

FAQs & How-Tos

5 results
  • Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices. 
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • 1. First, try to restart the Bluetooth connection on your source device (Smartphone/tablet/PC) by switching Bluetooth off and on again with a short pause in between.

    2. "Forget" (remove) the previously paired connection (on your smartphone/tablet/PC) in your Bluetooth settings if you had once paired with your product.

    3. Try to restart the source device (Smartphone/tablet/PC) by powering it off and on again and after restarting, try to establish a Bluetooth connection to your product.

    4. If the above does not work, then try to restart your product (Portable speaker, Headphone) by turning it off and on again.

    5. Press and hold down the Bluetooth button on your device (Portable speaker, Headphones) to initiate pairing mode again.

    6. Go into the Bluetooth settings on your Smartphone/tablet or PC to start the pairing process.

    You should now have a successful pairing with your device. If you are still experiencing issues, please contact us again.
  • If you are having trouble pairing your headphones or if your device is asking for a PIN, please make sure to check all available BT connections in your device's settings. Verify that you are connecting to the headphone's product name that excludes 'LE'. The 'LE' connection is only intended for voice assistant feature compatible with your headphones. If the voice assistant feature has not yet been configured, this would explain why the 'LE' connection appears as an available connection, but cannot be used for Bluetooth audio.

    https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1 

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +47 21 93 29 30

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00