JBL Live 770NC

JBL Live 770NC

Trådløse Over-Ear hodetelefoner med True Adaptive Noise Cancelling

Sold from 2023 until now

Getting started with your JBL Live 770NC

Getting started with your JBL Live 770NC

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Quick Start Guide & Downloads

Product Specifications

Driver size (mm)
40
Number of Microphones
2
Driver sensitivity at 1kHz/1mW (dB)
100
Dynamic frequency response range (Hz)
20 Hz – 20 kHz
Impedance (ohms)
32
Audio Cable Length (ft)
.7
Audio Cable Length (m)
.2
Dybde (cm)
2.7
Ear Cup Depth (in)
1.1
Høyde (cm)
9.3
Ear Cup External Height (in)
3.7
Bredde (cm)
7.6
Ear Cup External Width (in)
3.0
Indre bredde (cm)
5.8
Ear Cup Internal Height (in)
2.3
Indre høyde (cm)
4.0
Ear Cup Internal Width (in)
1.6
Hodetelefonens kabellengde (m)
.2
Headphone Cable Length (ft)
.7
Weight (g)
256
Weight (oz)
9
Bluetooth profiles
A2DP v1.4, HFP 1.8, AVRCP v1.6.2
Bluetooth frequency
2.4 GHz – 2.4835 GHz
Bluetooth transmitted modulation
GFSK, π/4-DQPSK, 8-DPSK
Bluetooth version
5.3
Charging time (hours from empty)
3
Maximum music play time with ANC off (hours)
65
Maximum music play time with ANC on (hours)
50
Maksimum spilletid (timer)
65
Maximum talk time (hours)
33
Audio cable
Ja
Bluetooth
Ja
Charging cable
Ja
Voice Assistant integration
Ja
Active Noise Cancelling
Ja
Adaptive Noise Cancelling
Ja
Ambient Aware
Ja
Built-in Microphone
Ja
Detachable Cable
Ja
Hands Free Call
Ja
JBL Headphone App
Ja
JBL Signature Sound
Ja
Multi-Point Connection
Ja
Over-øret
Ja
Rechargable battery
Ja
Spatial Sound
Ja
Speed charge
Ja
TalkThru
Ja
Wireless
Ja
True Adapte Noice Cancelling
Ja

Trådløse Over-Ear hodetelefoner med True Adaptive Noise Cancelling og Smart Ambient, som leverer JBL Signature Sound

JBL Live 770NC-hodetelefoner leverer kraftig JBL Signature Sound i et komfortabelt over-ear-hodebånddesign. Når du er dypt inne i det du holder på med, holder True Adaptive Noise Cancelling med Smart Ambient-teknologi deg fri fra distraksjoner. Eller, hvis du vil holde et øre åpent for verden rundt deg, kan du til og med ha en samtale uten å ta av hodetelefonene. Få enkel tilgang til din foretrukne stemmeassistent med enten et nøkkelord eller et trykk på øreklokken for å spille av favorittspillelisten din, tekste en venn, sjekke været og mye mer. Du kan nyte 65 timer (50 timer med BT + ANC på) med musikkstrømming. Trenger du enda mer? En 5-minutters hurtiglading gir deg ytterligere fire timer. JBL Live 770NC kan kobles til to Bluetooth®-enheter samtidig, slik at du aldri trenger å gå glipp av en samtale, selv om du ser på en film på nettbrettet.

Sammen med kraftig JBL Signature Sound tilbyr 40 mm-driverne oppslukende JBL Spatial Sound som gjør alt stereoinnhold fra alle enheter om til virtuell surroundlyd.
Strøm lyd av høy kvalitet trådløst selv ved lavere bit-hastigheter ved hjelp av den nyeste Bluetooth-teknologien.  Lydmodus gir deg den beste tilgjengelige lyden, mens videomodus sørger for at lyden og grafikken til filmene og spillene dine alltid er synkronisert. (*) Tilgjengelig via OTA-oppdatering på et senere tidspunkt.
Med fire støyfølsomme mikrofoner betyr True Adaptive Noise Cancelling null distraksjoner, enten det er på tide å fokusere på studiene – eller finne rytmen din. Og Smart Ambient kan fremheve lydene fra miljøet omkring deg når du vil få med deg hva som skjer uten å ta av hodetelefonene.
For langvarig moro, lytt trådløst i opptil 50 timer og lad opp batteriet på så lite som 2 timer med den praktiske USB C-kabelen. Og hvis du har det travelt, gir en rask 5-minutters opplading deg 4 ekstra timer med musikk. (*Batterilevetid: BT på / ANC av)
Ta av hodetelefonene, musikken stopper. Sett dem på igjen, musikken starter igjen. Det kunne virkelig ikke vært enklere.
Alexa eller Hei Google står alltid klar. Aktiver enhetens stemmeassistent ved å bruke nøkkelordet eller trykke på øreklokken.
Bytt enkelt fra én Bluetooth®-enhet til en annen. Hopp fra en video på nettbrettet til en samtale på mobiltelefonen din, uten å gå glipp av et øyeblikk.
Enten du bruker en Android- eller Windows-enhet er det enkelt å konfigurere hodetelefonene dine til å pare med den automatisk når den er i nærheten. Og med den nye Google Finder-tjenesten, hvis du noen gang mister hodebåndet ditt, har du et nettverk på over 3 millioner Android-venner som automatisk hjelper deg med å finne det.
Dine venner, familie og kolleger vil høre hvert ord du sier – selv om du er ute og vinden blåser.
Myke øreputer og et strukturert hodebånd i jordnyanser gjør disse hodetelefonene komfortable og unike. Og når du tar dem av har de et komfortabelt og beskyttende sted å bo som er lett å trekke ut av vesken.
Kontroller lydsporet til livet ditt. Den gratis JBL Headphones-appen lar deg skreddersy hodetelefonenes preferanser, som å tilpasse ANC, tilpasse hodetelefonenes atferd eller raskt sette opp utrolig realistisk lyd for filmer, musikk og spill.
My JBL Headphones-appen tilpasser lydopplevelsen din bare for deg. Bare ta den raske og enkle hørselstesten, så setter den automatisk opp en tilpasset lydprofil som er klar til bruk hver gang du setter på deg hodebåndet. Det er det.

FAQs & How-Tos

14 results
  • Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices. 
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • Visit the App Store and download the ‘Amazon Alexa’ App.

      Set up Amazon Alexa #1.png
    1. Click the Plus(+) button on the top right of the screen.
    2. Then select ‘Add Device‘.
    3. Select headphones from the list and then choose your Headphones from the list of available devices.
    4. Follow the rest of the instructions in the Alexa App to complete the setup.
  • If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.

    After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

    Step 1

      Set up Google Assistant #5.png
    Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
    Once set up is complete, you will see the below screen:

    Step 2

    Set up Google Assistant #2.png

    PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
    Set up Google Assistant #3.png
    Set up Google Assistant #4.png
  • Visit your App store to download the ‘Google Assistant’ App.

    After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

    Step 1

      Set up Google Assistant #1.png
    Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
    Once set up is complete, you will see the below screen:

    Step 2

    Set up Google Assistant #2.png

    PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
      Set up Google Assistant #3.png
    Set up Google Assistant #4.png
  • The voice assistant you select in the initial set-up (pictured below) will be used as the default assistant on your headphones.

    Switching between voice assistant #1.png

    You can change the default assistant in the ‘My JBL Headphones’ app:
    1. Open the My JBL Headphones app on your device.
    2. Select the headphones you are connected too.
    3. Go to Settings by clicking the symbol in the top right corner.
    4. Select Voice Assistant.
    5. Now you can select your preferred voice assistant.
    Switching between voice assistant #2.png

    Your headphones may restart after switching Voice Assistant.
  • After setting up Amazon Alexa on your headphones through the My JBL Headphones app, use Amazon Alexa by pressing & holding the touch panel for 2 seconds on the earbud that you have enabled the voice assistant feature on.
      Trigger Alexa #2 FAQ.png

    Things to try
    • “What’s the weather?”
    • Play Niall Horan
    • Play NPR on iHeartRadio
    • Set a timer for 5 minutes
    • What new skills do you have?
    Stop Alexa when she talks
    While Alexa is talking, press and release the Action button then say “Stop”.

    For more information and things to try with Alexa, visit: www.amazon.com/alexadevices
  • After setting up Google Assistant on your headphones through the My JBL Headphones app, use Google Assistant by pressing & holding the touch panel for 2 seconds on the earbud that you enabled the voice assistant feature on.
    Trigger Google - #1 FAQ.png
    Press and hold the Action button to begin. Requires pairing with eligible phone and internet connection. For examples of questions and things you can do, visit: https://assistant.google.com/platforms/phones/#headphones

    Get your notifications
    Double-tap the Action button.

    Stop your Google Assistant
    Touch the Action button.

    Reply to the message (where available)
    After receiving a message notification, touch and hold the Action button to respond. When you’re done, release the button.

    For more information on what your Google Assistant can do, visit: https://assistant.google.com/platforms/headphones

     
  • PSAP (Personal Sound Amplification) is a new feature accessible within the JBL Headphones App. When this feature is turned on, it works similar to Ambient Aware, but it focuses on picking up vocal frequencies in front of you. 

     

    1. GAIN: The Personal Sound Amplification function is designed to amplify sound in the vocal range, it can assist users with (limited) hearing loss to maintain conversations more easily, especially in noisy environments. It should then amplify the speech of the person sitting across from you, not the general ambient sound as with Ambient Aware. The algorithm uses beamforming to pick out the voice from the other sounds, much like what happens during a phone call, but instead of focusing on your own voice it focuses on the voice further away from you. The gain setting allows you to amplify those vocal frequencies.

     

    2. BALANCE: The balance setting adjusts the amplification effect between your left and right ears using the slider. When set to 0 (in the middle), both ears will receive the same amplification, but depending on the user’s personal needs/preferences, they can focus the amplification more towards either the left or right ear. 

     

    PSAP pics.PNG
< 1 2 >

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +47 21 93 29 30

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00